真空室内低温下的椭圆偏振分析
Ellipsometry with polarisation analysis at cryogenic temperatures inside a vacuum chamber
摘要:
在本文中,我们描述了一种新的变体的零椭圆偏振法,以确定在低温下的衬底上的薄膜的厚度和光学性质。在椭圆偏振仪的PCSA装置中,起偏器和补偿器放置在基底之前,检偏器放置在基底之后。通常,旋转起偏器和检偏器以找到在零椭圆偏振仪中搜索的强度最小值。在我们的变体中,我们旋转偏振器和补偿器,两者都被放置在基板之前的入射光束中。因此,反射光束的偏振分析可以通过固定方位的检偏器来实现。我们开发了这种方法,用于研究真空室内的低温薄膜,其中分析仪和检测器必须放置在温度为T约的冷屏蔽内。90K接近基板。所有其他光学部件安装在真空室外部的入射光束线处,包括在测量期间需要旋转的所有部件。我们的零椭圆偏振变体已经测试了高度取向的热解石墨基板(HOPG)上的冷凝氪膜在温度T约。两万五我们表明,它是可能的,以确定冷凝氪和HOPG基板的折射率,以及氪膜的厚度与合理的精度。
英文摘要:
In this paper we describe a new variant of null ellipsometry to determine thicknesses and optical properties of thin films on a substrate at cryogenic temperatures. In the PCSA arrangement of ellipsometry the polarizer and the compensator are placed before the substrate and the analyzer after it. Usually, the polarizer and the analyzer are rotated to find the intensity minimum searched for in null ellipsometry. In our variant we rotate the polarizer and the compensator instead, both being placed in the incoming beam before the substrate. Therefore the polarization analysis of the reflected beam can be realized by an analyzer at fixed orientation. We developed this method for investigations of thin cryogenic films inside a vacuum chamber, where the analyzer and detector had to be placed inside the cold shield at a temperature of T approx. 90K close to the substrate. All other optical components were installed at the incoming beam line outside the vacuum chamber, including all components which need to be rotated during the measurements. Our null ellipsometry variant has been tested with condensed krypton films on a highly oriented pyrolytic graphite substrate (HOPG) at a temperature of T approx. 25K. We show that it is possible to determine the indices of refraction of condensed krypton and of the HOPG substrate as well as thickness of krypton films with reasonable accuracy.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。