采用传递矩阵法分析转子-轴承系统
Rotor Bearing System Analysis Using the Transfer Matrix Method with Thickness Assumption of Disk and Bearing
摘要:
传递矩阵法是求解旋转系统固有频率的方法之一。在该方法中,转子被建模为沿轴的几个元件,这些元件具有它们自己的质量和转动惯量。使用这些元素,整个连续系统被离散化,相应的微分方程可以用矩阵形式表示。将轴端轴承等效为弹簧和阻尼器,并将其作为离散系统的边界条件。本文对考虑陀螺效应的转子-轴承系统进行了动力学分析。还考虑了盘和轴承的厚度。轴采用连续模型。结果表明,轴承厚度的增加使轴的刚度和系统的固有频率增大,而振动幅值减小。
英文摘要:
One of the methods to find the natural frequencies of rotating systems is the application of the transfer matrix method. In this method the rotor is modeled as several elements along the shaft which have their own mass and moment of inertia. Using these elements, the entire continuous system is discretized and the corresponding differential equation can be stated in matrix form. The bearings at the end of the shaft are modeled as equivalent spring and dampers which are applied as boundary conditions to the discretized system. In this paper the dynamics of a rotor-bearing system is analyzed, considering the gyroscopic effect. The thickness of the disk and bearings is also taken into account. Continuous model is used for shaft. Results Show that, the stiffness of the shaft and the natural frequencies of the system increase, while the amplitude of vibration decreases as a consequence of increasing the thickness of the bearing.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。