Unexpectedly, under certain conditions, sessile drops from different but completely miscible liquids do not always coalesce instantaneously upon contact: the drop bodies remain separated in a temporary state of noncoalescence, connected through a thin liquid bridge. Here we investigate the transition between the states of instantaneous coalescence and temporary noncoalescence. Experiments reveal that it is barely influenced by viscosities and absolute surface tensions. The main system control parameters for the transition are the arithmetic means of the three-phase angles, $\overlineΘ_a$ and the surface tension differences $Δγ$ between both liquids. These relevant parameters can be combined into a single system parameter, a speciffic Marangoni number $\widetilde{M} = 3Δγ/ (2\overlineγ\overlineΘ_a^2)$. This $\widetilde{M}$ universally characterizes the coalescence respectively transition behavior as a function of both, the physicochemical liquid properties and the shape of the liquid body in the contact region. The transition occurs at a certain threshold value $\widetilde{M}_t$ and is sharp within the experimental resolution. The experimentally observed threshold value of $\widetilde{M}_t \approx 2$ agrees quantitatively with values obtained by simulations assuming authentic real space data. The simulations indicate that the absolute value of $\widetilde{M}_t$ very weakly depends on the molecular diffusivity.
Coalescence of sessile polymeric fluid drops on a partially wettable substrate exhibits a transition from inertial to viscoelastic regime at concentration ratio $c/c^* \sim 1$. Our findings unveil that the temporal evolution of the growing bridge height follows a power-law behaviour $t^b$, such that the coefficient $b$ continuously decreases from 2/3 in the inertial regime ($c/c^*<1$) to an asymptotic value of 1/2 in the visco-elastic regime ($c/c^*>1$). To account for fluid elasticity and characteristic time-scale in the viscoelastic regime, a modified thin film equation under lubrication app…
Coalescence-induced alignment of anisotropic particles in drying sessile droplets
Forschungszentrum Jülich（于利希研究中心）；Helmholtz Institute Erlangen-Nürnberg for Renewable Energy (IET-2)（亥姆霍兹埃尔朗根-纽伦堡可再生能源研究所（IET-2））；Friedrich-Alexander-Universität Erlangen-Nürnberg（埃尔朗根-纽伦堡弗里德里希·亚历山大大学）
Capillarity always favors drop fusion. Nevertheless sessile drops from different but completely miscible liquids often do not fuse instantaneously upon contact. Rather, intermediate non-coalescence is observed. Two separate drop bodies, connected by a thin liquid neck move over the substrate. Supported by new experimental data a thin film hydrodynamic analysis of this state is presented. Presumably advective and diffusive volume fluxes in the neck region establish a localized and temporarily stable surface tension gradient. This induces a local surface (Marangoni) flow that stabilizes a travel…
The evolution of the liquid bridge formed between two coalescing sessile yield-stress drops is studied experimentally. We find that the height of the bridge evolves similar to a viscous Newtonian fluid, $h_0\sim t$, before arresting at long time prior to minimizing its liquid/gas interfacial energy. We numerically solve for the final arrested profile shape and find it depends on the fluid's yield stress $τ_y$ and coalescence angle $α$, represented by the Bingham number $τ_y h_{drop} / σ$ modified by the drop's height-width aspect ratio. We present a scaling argument for the bridge's temporal e…
When two sessile drops of the same liquid touch, they merge into one drop, driven by capillarity. However, the coalescence can be delayed, or even completely stalled for a substantial period of time, when the two drops have different surface tensions, despite being perfectly miscible. A temporary state of non-coalescence arises, during which the drops move on their substrate, only connected by a thin neck between them. Existing literature covers pure liquids and mixtures with low surface activities. In this paper, we focus on the case of large surface activities, using aqueous surfactant solut…
During coalescence of liquid drops contacting a solid, the liquid sweeps wetted and solid-projected areas. The extent of sweeping dictates the performance of devices such as self-cleaning surfaces, anti-frost coatings, water harvesters, and dropwise condensers. For these applications, weakly- and non-wetting solid substrates are preferred as they enhance drop dynamical behavior. Accordingly, our coalescence studies here are restricted to drops with contact angle 90° $\le θ_{0} \le$ 180°. Binary sessile drop coalescence is the focus, with volume of fluid simulations employed as the primary tool…
The internal dynamics during the coalescence of a sessile droplet and a subsequently deposited impacting droplet, with either identical or distinct surface tension, is studied experimentally in the regime where surface tension is dominant. Two color high-speed cameras are used to capture the rapid internal flows and associated mixing from both side and bottom views simultaneously by adding an inert dye to the impacting droplet. Given sufficient lateral separation between droplets of identical surface tension, a robust surface jet is identified on top of the coalesced droplet. Image processing …
We present an experimental and theoretical description of the kinetics of coalescence of two water drops on a plane solid surface. The case of partial wetting is considered. The drops are in an atmosphere of nitrogen saturated with water where they grow by condensation and eventually touch each other and coalesce. A new convex composite drop is rapidly formed that then exponentially and slowly relaxes to an equilibrium hemispherical cap. The characteristic relaxation time is proportional to the drop radius R * at final equilibrium. This relaxation time appears to be nearly 10 7 times larger th…
We present a theoretical study related to a recent experiment on the coalescence of sessile drops. The study deals with the kinetics of relaxation towards equilibrium, under the action of surface tension, of a spheroidal drop on a flat surface. For such a nonspherical drop under partial wetting conditions, the dynamic contact angle varies along the contact line. We propose a new nonlocal approach to the wetting dynamics, where the contact line velocity depends on the geometry of the whole drop. We compare our results to those of the conventional approach in which the contact line velocity depe…
The impact of a sessile droplet with a moving meniscus, as encountered in processes such as dip-coating, generically leads to the entrapment of small air bubbles. Here we experimentally study this process of bubble formation by looking through the liquid using high-speed imaging. Our central finding is that the size of the entrapped bubble crucially depends on the location where coalescence between the drop and the moving meniscus is initiated: (i) at a finite height above the substrate, or (ii) exactly at the contact line. In the first case, we typically find bubble sizes of the order of a fe…
We present a theoretical framework for capturing the coalescence of a pendant drop with a sessile drop in polymeric fluids. The framework is based on the unification of various constitutive laws under high Weissenberg creeping flow limit. Our results suggests that the phenomenon comes under a new regime namely, the sub-Newtonian regime followed by the limiting case of arrested coalescence with the arrest angle $θ_{arrest}\propto Ec^{-1/2}$, where $Ec$ is the Elasto-capillary number. Further, we propose a new time scale $T^*$ integrating the continuum variable $Ec$ and the macromolecular parame…
The coalescence of viscous drops on a substrate is studied experimentally and theoretically. We consider cases where the drops can have different contact angles, leading to a very asymmetric coalescence process. Side view experiments reveal that the "bridge" connecting the drops evolves with self-similar dynamics, providing a new perspective on the coalescence of sessile drops. We show that the universal shape of the bridge is accurately described by similarity solutions of the one-dimensional lubrication equation. Our theory predicts a bridge that grows linearly in time and stresses the stron…
Colliding drops are widely encountered in everyday technologies and natural processes, from combustion engines and commodity sprays to raindrops and cloud formation. The outcome of a collision depends on many factors, including the impact velocity and the degree of head-on alignment, in addition to intrinsic properties like surface tension. Yet little is known on the binary impact dynamics of low surface tension oil drops on a low-wetting surface. We experimentally and numerically investigate the dynamics of an oil drop impacting an identical sessile drop sitting on a superamphiphobic surface.…
Dynamics of the pendant drop coalescing with a sessile drop to form a single daughter droplet is known to form a bridge. The bridge evolution begins with a point contact between the two drops leading to a liquid neck of size comparable to the diameter of the drops. To probe this phenomenon in polymeric fluids, we quantify the neck radius growth during coalescence using high speed imaging. In the current study, we unveil the existence of three regimes on basis of concentration ratio $c/c^*$ namely, inertio-elastic $c/c^*<c_e/c^*$, viscoelastic $c_e/c^*<c/c^*<20$ and elasticity dominated regimes…
The coalescence of water drops on a substrate is studied experimentally. We focus on the rapid growth of the bridge connecting the two drops, which very quickly after contact ensues from a balance of surface tension and liquid inertia. For drops with contact angles below $90^\circ$, we find that the bridge grows with a self-similar dynamics that is characterized by a height $h\sim t^{2/3}$. By contrast, the geometry of coalescence changes dramatically for contact angles at $90^\circ$, for which we observe $h\sim t^{1/2}$, just as for freely suspended spherical drops in the inertial regime. We …
The characteristic time for the electrocoalescence of two sessile drops is identified and verified for wide range of operating parameters such as Ohnesorge, Electrowetting number, driving frequency and drop to surrounding medium viscosity. Elegant mechanism is devised to circumvent the repulsion and promote the coalescence at the merging three phase contact lines of two electrospreading drops. With the revised definition of characteristic time scale, we demonstrated the universality of the bridge growth at the early times of coalescence for more than twenty different scenarios in triplicates. …
