垂直集成电路热加热的物理建模与仿真
Physical Modeling And Simulation Of Thermal Heating In Vertical Integrated Circuits
摘要:
互连线是决定现代集成电路性能的主要因素之一。垂直集成电路的新技术除了传统的水平面外,还将电路块放置在垂直维度上。与平面IC相比,垂直IC具有更短的引线以及更低的功耗。这也提高了速度,改善了性能,并增加了IC密度。垂直IC的优势随着我们堆叠更多的芯片而增加,这是由于线长的连续减少。然而,当我们堆叠更多的管芯时,由于难以冷却远离散热器的层,晶格自加热成为一个具有挑战性和关键性的问题。在本文中,我们提供了一个定量的电热分析的温度上升,由于堆叠。数学模型的基础上,稳态非等温漂移扩散输运方程耦合到热流方程。这些基于物理的模型和半导体器件中的不同热源将被介绍和讨论。三维数值计算结果表明,与平面IC相比,采用2-die技术的垂直IC在远离散热器的管芯中的最高温度增加了17开尔文。这些数值计算结果也将提出和分析一个典型的2芯片结构的互补金属氧化物半导体(CMOS)晶体管。
英文摘要:
Interconnect is one of the main performance determinant of modern integrated circuits (ICs). The new technology of vertical ICs places circuit blocks in the vertical dimension in addition to the conventional horizontal plane. Compared to the planar ICs, vertical ICs have shorter latencies as well as lower power consumption due to shorter wires. This also increases speed, improves performances and adds to ICs density. The benefits of vertical ICs increase as we stack more dies, due to successive reductions in wire lengths. However, as we stack more dies, the lattice self-heating becomes a challenging and critical issue due to the difficulty in cooling down the layers away from the heat sink. In this paper, we provide a quantitative electro-thermal analysis of the temperature rise due to stacking. Mathematical models based on steady state non-isothermal drift-diffusion transport equations coupled to heat flow equation are used. These physically based models and the different heat sources in semiconductor devices will be presented and discussed. Three dimensional numerical results did show that, compared to the planar ICs, the vertical ICs with 2-die technology increase the maximum temperature by 17 Kelvin in the die away from the heat sink. These numerical results will also be presented and analyzed for a typical 2-die structure of complementary metal oxide semiconductor (CMOS) transistors.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。