基于光学全场测量的动脉三维残余应力场反演新方法
3D Residual Stress Field in Arteries: Novel Inverse Method Based on Optical Full-field Measurements
摘要:
动脉组织由多个结构上重要的成分组成,这些成分具有单独的材料特性和随时间演变的相关无应力配置。这产生了残余应力,有助于体内应力的稳态以及对扰动载荷、疾病或损伤的适应。在一个完整的,但无负荷切除动脉段的残余应力的存在表明,压缩和拉伸应力,分别在内壁和外壁。因此,动脉环在径向切割之后弹开成扇形。开口角的测量通常用于推导残余应力,残余应力是使环闭合所需的应力。张角法提供了周向残余应力的平均估计值,但它没有给出关于通过厚度和沿轴向方向的局部分布的信息。为了解决这一问题,本文提出了一种新的方法来获得残余应力的地图使用的方法的基础上的轮廓法。将一块新鲜切除的组织小心地切割到样本中,并使用基于有限元模型的逆方法从全身数字图像相关测量确定残余应变和应力的局部分布。
英文摘要:
Arterial tissue consists of multiple structurally important constituents that have individual material properties and associated stress-free configurations that evolve over time. This gives rise to residual stresses contributing to the homoeostatic state of stress in vivo as well as adaptations to perturbed loads, disease or injury. The existence of residual stresses in an intact but load-free excised arterial segment suggests compressive and tensile stresses, respectively, in the inner and outer walls. Accordingly, an artery ring springs open into a sector after a radial cut. The measurement of the opening angle is commonly used to deduce the residual stresses, which are the stresses required to close back the ring. The opening angle method provides an average estimate of circumferential residual stresses but it gives no information on local distributions through the thickness and along the axial direction. To address this lack, a new method is proposed in this article to derive maps of residual stresses using an approach based on the contour method. A piece of freshly excised tissue is carefully cut into the specimen, and the local distribution of residual strains and stresses is determined from whole-body digital image correlation measurements using an inverse approach based on a finite element model.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。