Numerical simulations of magnetosonic wave formation driven by an expanding cylindrical piston are performed to get better physical insight into the initiation and evolution of large-scale coronal waves. Several very basic initial configurations are employed to analyze intrinsic characteristics of the MHD wave formation that do not depend on specific properties of the environment. It turns out that these simple initial configurations result in piston/wave morphologies and kinematics that reproduce common characteristics of coronal waves. In the initial stage the wave and the expanding source-region cannot be clearly resolved. During the acceleration stage of the source-region inflation, the wave is driven by the piston expansion, so its amplitude and phase-speed increase, whereas the wavefront profile steepens. At a given point, a discontinuity forms in the wavefront profile. The time/distance required for the shock formation is shorter for a more impulsive source-region expansion. After the piston stops, the wave amplitude and phase-speed start decreasing. During the expansion, most of the source region becomes strongly rarified, which reproduces the coronal dimming left behind the eruption. On the other hand, the density increases at the source-region boundary, and stays enhanced even after the expansion stops, which might explain stationary brightenings that are sometimes observed at the edges of the erupted coronal structure. In addition, in the rear of the wave a weak density depletion develops, trailing the wave, which is sometimes observed as weak transient coronal dimming. Finally, we find a well defined relationship between the impulsiveness of the source-region expansion and the wave amplitude and phase speed. The results for the cylindrical piston are also compared with the outcome for a planar wave, to find out how different geometries affect the evolution of the wave.
Physical Conditions of Coronal Plasma at the transit of a Shock driven by a Coronal Mass Ejection
本文报道了利用白光日冕图像和射电动力学谱确定由日冕物质抛射驱动的冲击波的等离子体物理参数。这里分析的事件是发生在2011年6月7日的壮观爆发,一个快速的CME,随后是色球等离子体柱的喷射,其中一部分落回太阳表面,与M2.5耀斑和II型射电爆发有关。SOHO/LASCO日冕仪(C2和C3)获得的图像被用来跟踪日冕中2-12 R $_\odot$之间的日冕物质抛射驱动的激波,角度间隔约为110 $^\circ$。在这些时间间隔,我们推导出2维(2D)的电子密度,冲击波速度和冲击压缩比的地图,我们测量的冲击倾斜角相对于径向方向。在合理的假设下,这些量被用来推断激波马赫数$M_\text{A}$和激波高度处日冕磁场强度的二维图。我们发现,在早期阶段(2-4 R $_\odot$),整个激波面是超阿尔夫文型的,而在以后(即更高的位置),它只在头部变成超阿尔夫文型的。这与观测到的II型爆发源的位置一致,这是从RDS结合来自WL的冲击运动学和日冕密度推断的。第一次,一个日冕冲击是用来获得一个2D地图的日冕磁场强度超过10 R $_\odot$高度和$\sim 110^\circ$纬度间隔。
Coronal Shock Waves, EUV waves, and their Relation to CMEs. II. Modeling MHD Shock Wave Propagation Along the Solar Surface, Using Nonlinear Geometrical Acoustics
On Formation Of A Shock Wave In Front Of A Coronal Mass Ejection With Velocity Exceeding The Critical One
新的研究证实了[M]中的结论。Eselevich,and V. Eselevich,2008];根据该理论,在日冕物质抛射前,存在一个沿CME传播方向扩展的扰动区,其速度$u$相对于周围日冕等离子体低于临界$u_C$。扰动区的时间差亮度(等离子体密度)在CME前向更远的距离平滑地减小。在扰动区的前部,在高于$u_C$的u处形成激波,表现为亮度差径向分布的不连续性。
Estimated relations at a shock driven by a coronal mass ejection
SOHO/LASCO C3数据的分析揭示了一个不连续性,解释为一个冲击波,在一个有限的区域内的等离子体密度径向分布在每一个前面的10个选定的日冕物质抛射(CME)沿其行进方向。在各种事件中,冲击波速度为$V\approx$ 800-2500 km s $^{-1}$。将阿尔文马赫数$M_A$对激波强度$ρ_2/ρ_1$的依赖关系(在距太阳中心$R > 10R_\odot$测得)与理想MHD计算进行比较,表明表征激波阵面内部过程的有效绝热指数$γ$在很大程度上介于2和5/3之间。这对应于运动自由度的有效数量2至3。对于地球的弓形激波和行星际无碰撞激波,也导出了类似的依赖关系,即$M_A(ρ_2/ρ_1)$。所有这些都支持了CME前的间断是无碰撞激波的假设。
Three-dimensional reconstruction of CME-driven shock-streamer interaction from radio and EUV observations: a different take on the diagnostics of coronal magnetic fields
A Data-Driven Analytic Model for Proton Acceleration by Large-Scale Solar Coronal Shocks
我们最近研究了低太阳日冕中爆发性日冕驱动的大规模离边日冕亮锋(OCBF)的发展(Kozarev et al. 2015),使用太阳动力学天文台高级成像组件EUV望远镜的远程观测。在这项研究中,我们获得了高时间分辨率的估计OCBF参数调节的效率内的扩散冲击加速(DSA)的理论框架内的带电粒子加速。这些参数包括时间依赖的前的大小,速度和强度,以及上游冠状磁场相对于前的表面法线方向的方向。在这里,我们提出了一个分析粒子加速度模型,专门开发,将日冕冲击/压缩前面的属性,从远程观测。我们验证了模型的性能,通过网格的理想化的情况下运行使用典型的大规模日冕冲击的输入参数,并表明,结果接近预期的DSA稳态行为。然后,我们使用Kozarev等人(2015)中推导的OCBF时间相关参数将模型应用于2011年5月11日的事件。我们发现,压缩前可能产生高能粒子低至1.3太阳半径的日冕。比较模拟的和观测到的地球附近的注量,我们还发现,在这一事件中的大部分加速必须发生在1.5太阳半径以上。通过这项研究,我们已经迈出了第一步,使用直接观测的冲击和压缩在最里面的日冕,以预测SEP事件的发生和强度。
On the Relationship between Solar Spicules and Propagating Coronal Disturbances: The Role of Shocks
Udaipur Solar Observatory, Physical Research Laboratory(乌代浦尔太阳观测台,物理研究实验室);Indian Institute of Technology, Gandhinagar(印度理工学院,甘地纳加尔);Indian Institute of Astrophysics(印度天体物理研究所);Pondicherry University(本地治里大学);School of Science, University of Newcastle(纽卡斯尔大学理学院);Solar Physics and Space Plasma Research Centre (SP2RC), School of Mathematical and Physical Sciences, University of Sheffield(谢菲尔德大学数学与物理科学学院太阳物理与空间等离子体研究中心);Department of Astronomy, Eötvös Loránd University(罗兰大学天文系);Gyula Bay Zoltán Solar Observatory (GSO), Hungarian Solar Physics Foundation (HSPF)(久洛·拜·佐尔坦太阳观测台,匈牙利太阳物理基金会)
A data-driven physics-based transport model of solar energetic particles accelerated by coronal mass ejection shocks propagating through the solar coronal and heliospheric magnetic fields
Heavy-ion Acceleration and Self-generated Waves in Coronal Shocks
背景:日冕物质抛射驱动冲击的加速目前被认为是大型太阳高能粒子事件的主要来源。目的:太阳风是冲击波加速粒子的来源,它包含了大量的离子群,这些离子群提供了对加速过程的深入了解。我们提出了第一次冲击加速的次要离子的模拟,以探索详细的捕获动力学和加速时间尺度。研究方法:我们已经模拟了次要离子(3 He 2+,4 He 2+,16 O 6+和56 Fe 14+)和质子的扩散冲击加速使用Monte Carlo方法,其中自生Alfvénic湍流允许重复冲击交叉和加速到高能量。结果:我们提出的影响,特别是在低波数的微量离子的波产生,并表明这是显着的。我们发现,最大离子能量是由粒子逃逸的竞争效应,由于在一个扩大的通量管和捕获由于放大湍流聚焦。我们证明截止能量与粒子荷质比的关系近似为(Q/A)^[1.5]。结论:我们建议,了解日冕冲击的小离子的加速需要模拟,使我们能够详细探索捕获动力学和加速时间尺度,包括湍流捕获边界的演变。我们的结论是稳态模型不足以描述日冕冲击中的重离子加速。
Three-dimensional properties of a coronal shock and the longitudinal distribution of its related solar energetic particles
Key Laboratory of Dark Matter and Space Astronomy, Purple Mountain Observatory, Chinese Academy of Sciences(中国科学院紫金山天文台暗物质与空间天文重点实验室);School of Astronomy and Space Science, University of Science and Technology of China(中国科学技术大学天文与空间科学学院);National Key Laboratory of Deep Space Exploration/School of Earth and Space Sciences, University of Science and Technology of China(中国科学技术大学深空探测全国重点实验室/地球与空间科学学院);CAS Center for Excellence in Comparative Planetology, University of Science and Technology of China(中国科学技术大学中科院比较行星学卓越创新中心);School of Physics and Optoelectronic Engineering, Institute of Space Weather, Nanjing University of Information Science and Technology(南京信息工程大学物理与光电工程学院空间天气研究所);State Key Laboratory of Solar Activity and Space Weather, National Space Science Center, Chinese Academy of Sciences(中国科学院国家空间科学中心太阳活动与空间天气国家重点实验室)
The density compression ratio of shock fronts associated with coronal mass ejections
提出了一种新的方法来提取白光日冕图像中观测到的与日冕物质抛射(CME)有关的激波阵面的三维电子密度分布和密度压缩比。我们证明了快速晕日冕物质抛射($\sim$ 2000 km s $^{-1}$)的两个例子的方法观察到2011年3月7日和2014年2月25日。我们的方法使用椭球模型来推导三维(3D)的几何形状和运动学的前线。鞘层的密度分布采用具有四个自由参数的双高斯函数模型,电子分布在前面后面的薄壳层内。模型化的密度沿视线进行积分,以与COR 2-A中观察到的亮度进行比较,并且使用$χ^2$方法来获得高斯分布的最佳参数。上游密度是从事件前图像中的亮度反演和经验模型中获得的。导出了密度比和Alfvénic马赫数。我们发现密度压缩在CME头部附近达到最大值,并在较大的位置角处减小。这种行为与机头处的驱动激波和CME侧翼处的自由传播激波一致。有趣的是,我们发现超临界区在大面积的冲击和持续时间(几十分钟)比过去的报告。因此,日冕物质抛射冲击能够在扩展的空间和时间尺度上加速日冕中的高能粒子,并且可能是这些粒子在内日球层中广泛纵向分布的原因。我们的研究结果还表明,多视点日冕观测和正演模拟的权力,在远程推导关键的冲击属性,否则无法访问的制度。