The coarsening of catalytically-active metal clusters is often accelerated by the presence of gases through the formation of mobile intermediates, though the exact mechanism through which this happens is often subject to debate. We use scanning tunneling microscopy (STM) to follow the CO induced coalescence of Pd adatoms supported on the Fe3O4(001) surface at room temperature. We show that highly-mobile Pd-carbonyl species, formed via the so-called skyhook effect, are temporarily trapped at other Pd adatoms. Once these reach a critical density, clusters nucleate; subsequent coarsening occurs through cluster diffusion and coalescence. While CO increases the mobility in the Pd/Fe3O4 system, surface hydroxyls have the opposite effect. Pd atoms transported to surface OH groups are no longer susceptible to the skyhook effect and remain isolated. Following the evolution from well-dispersed metal adatoms into clusters, atom-by-atom, allows identification of the key processes that underlie gas-induced mass transport.
Single-atom catalysts represent an essential and ever-growing family of heterogeneous catalysts. Recent studies indicate that besides the valuable catalytic properties provided by single-atom active sites, the presence of single-atom sites on the catalyst substrates may significantly influence the population of supported metal nanoparticles coexisting with metal single atoms. Treatment of ceria-based single-atom catalysts in oxidizing or reducing atmospheres was proven to provide precise experimental control of the size of the supported Pt nanoparticles, and, correspondingly, control of cataly…
The local environment of metal-oxide supported single-atom catalysts plays a decisive role in the surface reactivity and related catalytic properties. The study of such systems is complicated by the presence of point defects on the surface, which are often associated with the localization of excess charge in the form of polarons. This can affect the stability, the electronic configuration, and the local geometry of the adsorbed adatoms. In this work, through the use of density functional theory and surface-sensitive experiments, we study the adsorption of Rh1, Pt1, and Au1 metals on the reduce…
Catalysis has entered everyday life through a number of technological processes relying on different catalytic systems. The increasing demand for such systems requires rationalization of the use of their expensive components, like noble metal catalysts. As such, a catalyst with low noble metal concentration, in which each one of the noble atoms is active, would reach the lowest price possible. Nevertheless, there are no reactivity descriptors outlined for this type of low coordinated supported atoms. Using DFT calculations, we consider three diverse systems as models of single atom catalysts. …
We present a Scanning Tunneling Microscopy (STM) investigation of gold deposited at the magnetite Fe3O4(001) surface at room temperature. This surface forms a reconstruction with (\surd2\times\surd2)R45° symmetry, where pairs of Fe and neighboring O ions are slightly displaced laterally, forming undulating rows with 'narrow' and 'wide' adsorption sites. At fractional monolayer coverages, single Au adatoms adsorb exclusively at the narrow sites, with no significant sintering up to annealing temperatures of 400 °C. The strong preference for this site is possibly related to charge and orbital ord…
Gold deposited on the Fe$_3$O$_4$(001) surface at room temperature was studied using Scanning Tunneling Microscopy (STM) and X-ray photoelectron spectroscopy (XPS). This surface forms a ($\sqrt2 \times \sqrt2$)R45$^{\circ}$ reconstruction, where pairs of Fe and neighboring O ions are slightly displaced laterally producing undulating rows with `narrow' and `wide' hollow sites. At low coverages, single Au adatoms adsorb exclusively at the narrow sites, with no significant sintering up to annealing temperatures of 400 $^{\circ}$C. We propose the strong site preference to be related to charge and …
Calculations of the potential energy surface for tracer Ga and In adatoms above three GaAs (111)A surface reconstructions are presented in order to understand the growth conditions required to form axial heterostructures in GaAs/InGaAs nano-pillars. In all calculations the Ga adatom has a stronger bond energy to the surface than the In adatom. The diffusion barriers for Ga adatoms are 140meV larger than for In adatoms on the Ga vacancy surface, but they are comparable on the As trimer surface. Also the binding energy for an In adatom is closer to that of a Ga adatom on the As trimer surface. W…
Non-neglectable entropy effect on sintering of supported nanoparticles
Zhangjiang Laboratory, Shanghai Advanced Research Institute, Chinese Academy of Sciences（张江实验室，上海高等研究院，中国科学院）；Shanghai Institute of Applied Physics, Chinese Academy of Sciences（中国科学院上海应用物理研究所）；Zhejiang University（浙江大学）；Shanghai University（上海大学）；Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences（中国科学院上海微系统与信息技术研究所）；University of Chinese Academy of Sciences（中国科学院大学）；ShanghaiTech University（上海科技大学）；Dalian Institute of Chemical Physics, Chinese Academy of Sciences（中国科学院大连化学物理研究所）；Hitachi High-Tech (Shanghai) Co., Ltd.（日立高新技术（上海）有限公司）
Oxide-supported single-atom catalysts are commonly modelled as a metal atom substituting surface cation sites in a low-index surface. Adatoms with dangling bonds will inevitably coordinate molecules from the gas phase, and adsorbates such as water can affect both stability and catalytic activity. Here, we use scanning tunneling microscopy (STM), noncontact atomic force microscopy (ncAFM), and x-ray photoelectron spectroscopy (XPS) to show that high densities of single Rh adatoms are stabilized on alpha-Fe2O3(1-102) in the presence of 2x10^(-8) mbar of water at room temperature, in marked contr…
The design of catalysts with desired chemical and thermal properties is viewed as a grand challenge for scientists and engineers. For operation at high temperatures, stability against structural transformations is a key requirement. Although doping has been found to impede degradation, the lack of atomistic understanding of the pertinent mechanism has hindered optimization. For example, porous gamma-Al2O3, a widely used catalyst and catalytic support, transforms to non-porous alpha-Al2O3 at ~1,100C. Doping with La raises the transformation temperature to ~1,250C, but it has not been possible t…
Heterogeneous catalysts consisting of supported metallic nanoparticles typically derive exceptional catalytic activity from their large proportion of under-coordinated surface sites which promote adsorption of reactant molecules. Simultaneously, these high energy surface configurations are unstable, leading to nanoparticle growth or degradation, and eventually a loss of catalytic activity. Surface morphology of catalytic nanoparticles is paramount to catalytic activity, selectivity, as well as degradation rates, however, it is well-known that harsh reaction conditions can cause the surface str…
Heterogeneous catalysts based on sub-nanometer metal clusters often exhibit strongly size-dependent properties, and the addition or removal of a single atom can make all the difference. Identifying the most active species and deciphering the reaction mechanism is extremely difficult, however, because it is often not clear how the catalyst evolves in operando. Here, we utilize a combination of atomically resolved scanning probe microscopies, spectroscopic techniques, and density functional theory (DFT)-based calculations to study CO oxidation by a model Pt/Fe3O4(001) single-atom catalyst. We de…
Development of novel materials may often require a rational use of high price components, like noble metals, in combination with the possibility to tune their properties in a desirable way. Here we present a theoretical DFT study of Au and Pd single atoms supported by doped MgO(001). By introducing B, C and N impurities into the MgO(001) surface, the interaction between the surface and the supported metal adatoms can be adjusted. Impurity atoms act as strong binding sites for Au and Pd adatoms and can help to produce highly dispersed metal particles. The reactivity of metal atoms supported by …
We report a first-principles calculation that models the effect of iron (Fe) atoms on the adsorption of a tungsten (W) atom on W(100) surfaces. The adsorption of a W atom on a clean W(100) surface is compared with that of a W atom on a W(100) surface covered with a monolayer of Fe atoms. The total energy of the system is computed as the function of the height of the W adatom. Our result shows that the W atom first adsorbs on top of the Fe monolayer. Then the W atom can replace one of the Fe atoms through a path with a moderate energy barrier and reduce its energy further. This intermediate sit…
Understanding the fundamental mechanisms of single-atom catalysis (SAC) is important to design systems with improved performance and stability. This is problematic, however, because single-atom active sites are extremely difficult to characterize with existing experimental techniques. Over the last 40 years, surface science has provided the fundamental insights to understand heterogeneous catalysis, but model systems in which metal atoms are stable on well-characterized metal-oxide substrates at reaction temperatures are scarce. In this perspective, I discuss what is already known about isolat…
