A Fully Coupled Immersed Finite Element Method for Fluid Structure Interaction via the Deal.II Library
Scuola Internazionale Superiore di Studi Avanzati（高等师范学院）；Center for Neural Engineering（神经工程中心）；Department of Engineering Science and Mechanics（工程科学与工程力学系）；The Pennsylvania State University（宾夕法尼亚州立大学）
We present the implementation of a solution scheme for fluid-structure interaction problems via the finite element software library deal.II. The solution scheme is an immersed finite element method in which two independent discretizations are used for the fluid and immersed deformable body. In this type of formulation the support of the equations of motion of the fluid is extended to cover the union of the solid and fluid domains. The equations of motion over the extended solution domain govern the flow of a fluid under the action of a body force field. This body force field informs the fluid of the presence of the immersed solid. The velocity field of the immersed solid is the restriction over the immersed domain of the velocity field in the extended equations of motion. The focus of this paper is to show how the determination of the motion of the immersed domain is carried out in practice. We show that our implementation is general, that is, it is not dependent on a specific choice of the finite element spaces over the immersed solid and the extended fluid domains. We present some preliminary results concerning the accuracy of the proposed method.
This work presents the efficient, matrix-free finite-element library hyper.deal for solving partial differential equations in two to six dimensions with high-order discontinuous Galerkin methods. It builds upon the low-dimensional finite-element library deal.II to create complex low-dimensional meshes and to operate on them individually. These meshes are combined via a tensor product on the fly and the library provides new special-purpose highly optimized matrix-free functions exploiting domain decomposition as well as shared memory via MPI-3.0 features. Both node-level performance analyses an…
We propose a finite element method for simulating one-dimensional solid models moving and experiencing large deformations while immersed in generalized Newtonian fluids. The method is oriented towards applications involving microscopic devices or organisms in the soft-bio-matter realm. By considering that the strain energy of the solid may explicitly depend on time, we incorporate a mechanism for active response. The solids are modeled as Cosserat rods, a detailed formulation being provided for the special case of a planar non-shearable rod. The discretization adopts one-dimensional Hermite el…
A finite element implementation of surface elasticity at finite strains using the deal.II library
Centre for Research in Computational and Applied Mechanics, University of Cape Town（开普敦大学计算与应用力学研究中心）；Chair of Applied Mechanics, University of Erlangen–Nuremberg（埃尔朗根-纽伦堡大学应用力学系）
A Volumetrically Stabilized Mixed Formulation of the Finite Element Immersed Boundary Method for Fluid Structure Interaction with Fully Incompressible Hyperelastic Solids
University at Buffalo（布法罗大学）；Advanced Micro Devices, Inc.（超威半导体公司）
In this paper we employ two implementations of the fictitious domain (FD) method to simulate water-entry and water-exit problems and demonstrate their ability to simulate practical marine engineering problems. In FD methods, the fluid momentum equation is extended within the solid domain using an additional body force that constrains the structure velocity to be that of a rigid body. Using this formulation, a single set of equations is solved over the entire computational domain. The constraint force is calculated in two distinct ways: one using an Eulerian-Lagrangian framework of the immersed…
Solving the (Navier-)Stokes equations with space and time adaptivity using deal.II
Technical University of Berlin（柏林工业大学）；Charles University（查理大学）；Ruhr University Bochum（波鸿鲁尔大学）；Otto von Guericke University Magdeburg（马格德堡奥托·冯·格里克大学）；Weierstrass Institute for Applied Analysis and Stochastics（魏尔斯特拉斯应用分析与随机性研究所）
For the stationary advection-diffusion problem the standard continuous Galerkin method is unstable without some additional control on the mesh or method. The interior penalty discontinuous Galerkin method is stable but at the expense of an increased number of degrees of freedom. The hybrid method proposed in [5] combines the computational complexity of the continuous method with the stability of the discontinuous method without a significant increase in degrees of freedom. We discuss the implementation of this method using the finite element library deal.ii and present some numerical experimen…
We present a new finite element method, called $ϕ$-FEM, to solve numerically elliptic partial differential equations with natural (Neumann or Robin) boundary conditions using simple computational grids, not fitted to the boundary of the physical domain. The boundary data are taken into account using a level-set function, which is a popular tool to deal with complicated or evolving domains. Our approach belongs to the family of fictitious domain methods (or immersed boundary methods) and is close to recent methods of cutFEM/XFEM type. Contrary to the latter, $ϕ$-FEM does not need any non-standa…
A Unified-Field Monolithic Fictitious Domain-Finite Element Method for Fluid-Structure-Contact Interactions and Applications to Deterministic Lateral Displacement Problems
