NOvA冲击磁铁陶瓷束管钎焊接头的机械设计
Mechanical design of ceramic beam tube braze joints for NOvA kicker magnets
摘要:
NOνA实验将构建一个针对现有NuMI中微子束中的电子中微子探测进行优化的探测器。NuMI束线能够以400 kW的初级束功率运行,升级后将允许高达700 kW。陶瓷束管被用于费米国家加速器实验室不同加速器环中的许多冲击磁铁。可伐法兰钎焊到每个梁管端,因为可伐和高铝陶瓷具有相似的膨胀曲线。将管、科瓦法兰、端件和钎焊箔合金钎焊材料堆叠在炉中,然后进行钎焊。近年来,制造冲击磁体的最具挑战性的方面是在陶瓷和凸缘之间的钎焊接头上进行气密真空密封。许多工艺变量会影响传统金属/陶瓷钎焊工艺的稳健性。当陶瓷内未发生失效时,陶瓷-填充金属界面通常是薄弱层。将讨论活性钎料和锰-锰工艺之间的差异,以及这些技术用于费米实验室生产冲击管的适用结果。
英文摘要:
The NOνA Experiment will construct a detector optimized for electron neutrino detection in the existing NuMI neutrino beam. The NuMI beam line is capable of operating at 400 kW of primary beam power and the upgrade will allow up to 700 kW. Ceramic beam tubes are utilized in numerous kicker magnets in different accelerator rings at Fermi National Accelerator Laboratory. Kovar flanges are brazed onto each beam tube end, since kovar and high alumina ceramic have similar expansion curves. The tube, kovar flange, end piece, and braze foil alloy brazing material are stacked in the furnace and then brazed. The most challenging aspect of fabricating kicker magnets in recent years have been making hermetic vacuum seals on the braze joints between the ceramic and flange. Numerous process variables can influence the robustness of conventional metal/ceramic brazing processes. The ceramic-filler metal interface is normally the weak layer when failure does not occur within the ceramic. Differences between active brazing filler metal and the moly-manganese process will be discussed along with the applicable results of these techniques used for Fermilab production kicker tubes.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。