喷墨印刷法制备葡萄糖生物传感器
Fabrication of glucose biosensors by inkjet printing
摘要:
喷墨印刷已经被用于使用葡萄糖氧化酶和丝网印刷的碳电极来制造葡萄糖传感器。通过适当选择印刷和干燥条件,我们能够制造对葡萄糖浓度显示出良好线性响应的传感器结构。为了获得这些结构,我们必须仔细控制酶溶液在碳电极上的铺展和干燥。碳电极表面是疏水的,并且Triton X用作表面活性剂以允许完全覆盖电极表面。在干燥期间,在环境条件下,酶溶液分离以形成环状沉积物(咖啡染色)。咖啡染色被证明是有害的传感器的性能,它可以通过在降低湿度的环境中干燥去除。
英文摘要:
Inkjet printing has been used to fabricate glucose sensors using glucose oxidase and screen printed carbon electrodes. By appropriate selection of printing and drying conditions we are able to fabricate sensor structures that show a good linear response to glucose concentration. In order to achieve these structures we must carefully control the spreading and drying of the enzyme solution on the carbon electrode. Carbon electrode suirfaces are hydrophobic and Triton X was used as a surfactant to allow full coverage of the electrode surface. During drying, under ambient conditions the enzyme solution segregates to form a ring deposit (coffee staining). Coffee staining is shown to be deleterious to sensor performance and it can be removed by drying in a reduced humidity environment.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。