用交流纳量热法对微克级铅晶体的绝对specific heat测量
Absolute specific heat measurements of a microgram Pb crystal using ac nanocalorimetry
摘要:
使用交流稳态方法测量热容通常被认为难以提供绝对准确度。通过调整工作频率以保持恒定的相位,并利用相位信息来获得热容,我们发现有可能实现良好的绝对精度。在这里,我们提出了一个~ 2.6 μg铅超导晶体的热力学研究,以证明新的开放能力。使用基于差示膜的量热计测量样品。定制的量热电池是一堆薄膜Ti加热器、绝缘层和Ge_{1-x} Au_{x}温度计,它们制造在两个Si_{3} N_{4}膜的中心。在300 K时背景热容< 100 nJ/K,在1 K时降至9 pJ/K。样品在低至0.5 K的温度下进行表征。Tc = 7.21 K时的零场跃迁宽度为\approx 20 mK,在C中没有上弯。由Tc处的热容跃变和外推的索末菲项,我们得到\DeltaC /γTc = 2.68。讨论了零场热容测量得到的潜热曲线,以及热力学临界场与经验公式Hc =Hc(0)[1-(T/Tc)^2]的偏差。这两种分析结果与文献吻合良好。
英文摘要:
Heat capacity measurements using the ac steady state method are often considered difficult to provide absolute accuracy. By adjusting the working frequency to maintain a constant phase and using the phase information to obtain the heat capacity, we have found that it is possible to achieve good absolute accuracy. Here we present a thermodynamic study of a ~ 2.6 μg Pb superconducting crystal to demonstrate the newly opened capabilities. The sample is measured using a differential membrane-based calorimeter. The custom-made calorimetric cell is a pile of thin film Ti heater, insulation layer and Ge_{1-x}Au_{x} thermometer fabricated in the center of two Si_{3}N_{4} membranes. It has a background heat capacity < 100 nJ/K at 300K, decreasing to 9 pJ/K at 1 K. The sample is characterized at temperatures down to 0.5 K. The zero field transition at Tc = 7.21 K has a width \approx 20 mK and displays no upturn in C. From the heat capacity jump at Tc and the extrapolated Sommerfeld term we find \DeltaC/γTc = 2.68. The latent heat curve obtained from the zero field heat capacity measurement, and the deviations of the thermodynamic critical field from the empirical expression Hc =Hc(0)[1-(T/Tc)^2] are discussed. Both analyses give results in good agreement with literature.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。