The structural, electronic, and optical properties of twelve multicomponent oxides with layered structure, RAMO$_4$, where R$^{3+}$=In or Sc; A$^{3+}$=Al or Ga; and M$^{2+}$=Ca, Cd, Mg, or Zn, are investigated using first-principles density functional approach. The compositional complexity of RAMO$_4$ leads to a wide range of band gap values varying from 2.45 eV for InGaCdO$_4$ to 6.29 eV for ScAlMgO$_4$. Strikingly, despite the different band gaps in the oxide constituents, namely, 2-4 eV in CdO, In$_2$O$_3$, or ZnO; 5-6 for Ga$_2$O$_3$ or Sc$_2$O$_3$; and 7-9 eV in CaO, MgO, or Al$_2$O$_3$, the bottom of the conduction band in the multicomponent oxides is formed from the s-states of all cations and their neighboring oxygen p-states. We show that the hybrid nature of the conduction band in multicomponent oxides originates from the unusual five-fold atomic coordination of A$^{3+}$ and M$^{2+}$ cations which enables the interaction between the spatially-spread s-orbitals of adjacent cations via shared oxygen atoms. The effect of the local atomic coordination on the band gap, the electron effective mass, the orbital composition of the conduction band, and the expected (an)isotropic character of the electron transport in layered RAMO$_4$ is thoroughly discussed.
Applying elastic deformation can tune a material physical properties locally and reversibly. Spatially modulated lattice deformation can create a bandgap gradient, favouring photo-generated charge separation and collection in optoelectronic devices. These advantages are hindered by the maximum elastic strain that a material can withstand before breaking. Nanomaterials derived by exfoliating transition metal dichalcogenides TMDs are an ideal playground for elastic deformation, as they can sustain large elastic strains, up to a few percent. However, exfoliable TMDs with highly strain-tunable pro…
Recently, layered hybrid perovskites have been attracting huge interest due to a wide range of possible chemical compositions and the resulting tunability of the materials properties. In this study, we investigate the effect of the chain length of the organic ligands on the optical properties of stacks of two dimensional perovskite layers consisting of alkylammonium lead iodide (CnH2n+1NH3)2PbI4 with n=4-18. Photoluminescence and absorption spectroscopy reveal a blueshift with increasing chain length n including a jump of 110 meV between the n=10 and n=12 ligands due to a change in octahedral …
Two-dimensional (2D) layered materials with diverse properties have attracted significant interest in the past decade. The layered materials discovered so far have covered a wide, yet discontinuous electromagnetic spectral range from semimetallic graphene, insulating boron nitride, to semiconductors with bandgaps from middle infrared to visible light. Here, we introduce new layered semiconductors, black arsenic-phosphorus (b-AsP), with highly tunable chemical compositions and electronic and optical properties. Transport and infrared absorption studies demonstrate the semiconducting nature of b…
We propose here a two-dimensional material based on a single layer of violet or Hittorf's phosphorus. Using first-principles density functional theory, we find it to be energetically very stable, comparable to other previously proposed single-layered phosphorus structures. It requires only a small energetic cost of approximately $0.04~\text{eV/atom}$ to be created from its bulk structure, Hittorf's phosphorus, or a binding energy of $0.3-0.4~\text{J/m}^2$ per layer, suggesting the possibility of exfoliation in experiments. We find single-layered Hittorf's phosphorus to be a wide band gap semic…
Two-dimensional transition-metal dichalcogendes $MX_2$ (es. MoS$_2$, WS$_2$, MoSe$_2$, \ldots) are among the most promising materials for bandgap engineering. Widely studied in these compounds, by means of ab-initio techniques, is the possibility of tuning the direct-indirect gap character by means of in-plane strain. In such kind of calculations however the lattice degrees of freedom are assumed to be classical and frozen. In this paper we investigate in details the dependence of the bandgap character (direct vs. indirect) on the out-of-plane distance $h$ between the two chalcogen planes in e…
In recent years, two-dimensional (2D) layered semiconductors have received much attention for their potential in next-generation electronics and optoelectronics. Wide-bandgap 2D semiconductors are especially important in blue and ultraviolet wavelength region, while there are very few 2D materials in this region. Here, monolayer \b{eta}-type zirconium nitride chloride (\b{eta}-ZrNCl) is isolated for the first time, which is an air-stable layered material with a bandgap of ~3.0 eV in bulk. Systematical investigation of layer-dependent Raman scattering of ZrNCl from monolayer, bilayer, to bulk r…
Recently cycloarene has been experimentally obtained in a self-assembled structure, forming graphene-like monoatomic layered systems. Here, we establish the bandgap engineering/prediction in cycloarene assemblies within a combination of density functional theory and tight-binding Hamiltonians. Our results show a weak dependence of the gap with the assembly geometry, contrasting a strong dependence with the inter-molecule bond density. We derived a effective model that allows the interpretation of the arising energy gap for general particle-hole symmetric molecular arranges based on inter-molec…
We find that layered materials composed of various oxides of cations with $s^2$ electronic configuration, $XY_2$O$_4$, $X$=In or Sc, $Y$=Ga, Zn, Al, Cd and/or Mg, exhibit isotropic electron effective mass which can be obtained via averaging over those of the corresponding single-cation oxide constituents. This effect is due to a hybrid nature of the conduction band formed from the s-states of {\it all} cations and the oxygen p-states. Moreover, the observed insensitivity of the electron effective mass to the oxygen coordination and to the distortions in the cation-oxygen chains suggests that s…
Energy bandgap largely determines the optical and electronic properties of a semiconductor. Variable bandgap therefore makes versatile functionality possible in a single material. In layered material black phosphorus, the bandgap can be modulated by the number of layers; as a result, few-layer black phosphorus has discrete bandgap values that are relevant for opto-electronic applications in the spectral range from red, in monolayer, to mid-infrared in the bulk limit. Here, we further demonstrate continuous bandgap modulation by mechanical strain applied through flexible substrates. The strain-…
Two-dimensional ultrawide bandgap materials, with bandgaps significantly wider than 3.4 eV, have compelling potential advantages in nano high-power semiconductor, deep-ultraviolet optoelectronics, and so on. Recently, two-dimensional layered h-BeO has been synthesized in the experiments. In the present work, the first-principles calculations predict that monolayer h-BeO has an indirect bandgap of 7.05 eV with the HSE functional. The ultrawide bandgap results from the two atomic electronegativity difference in the polar h-BeO. And the electronic transport properties are also systematically inve…
Few-layer Tellurium, an elementary semiconductor, succeeds most of striking physical properties that black phosphorus (BP) offers and could be feasibly synthesized by simple solution-based methods. It is comprised of non-covalently bound parallel Te chains, among which covalent-like feature appears. This feature is, we believe, another demonstration of the previously found covalent-like quasi-bonding (CLQB) where wavefunction hybridization does occur. The strength of this inter-chain CLQB is comparable with that of intra-chain covalent bonding, leading to closed stability of several Te allotro…
Based on first-principles density functional calculations, we show that SnS and SnSe layers can form mechanically rigid heterostructures with the constituent puckered or buckled monolayers. Due to the strong interlayer coupling, the electronic wavefunctions of the conduction and valence band edges are delocalized across the heterostructure. The resultant bandgap of the heterostructures reside in the infrared region. With strain engineering, the heterostructure bandgap undergoes transition from indirect to direct in the puckered phase. Our results show that there is a direct correlation between…
We report the realization of field-effect transistors (FETs) made with chemically- synthesized layered two dimensional (2D) crystal semiconductor WS2. The 2D Schottky-barrier FETs demonstrate ambipolar behavior and a high (~105x) on/off current ratio at room temperature with current saturation. The behavior is attributed to the presence of an energy bandgap in the 2D crystal material. The FETs show clear photo response to visible light. The promising electronic and optical characteristics of the devices combined with the layered 2D crystal flexibility make WS2 attractive for future electronic …
Three-dimensional lead halide perovskites have surprised people for their defect-tolerant electronic and optical properties, two-dimensional lead halide layered structures exhibit even more puzzling phenomena: luminescent edge states in Ruddlesden-Popper perovskites and conflicting reports of highly luminescent versus non-emissive CsPb$_{\text{2}}$Br$_{\text{5}}$. In this work, we report the observation of bright luminescent surface states on the edges of CsPb$_{\text{2}}$Br$_{\text{5}}$ microplatelets. We prove that green surface emission makes wide-bandgap single crystal CsPb$_{\text{2}}$Br$…
Two dimensional van der Waals crystals and their heterostructures provide an exciting alternative to bulk wide bandgap semiconductors as hosts of single photon emitters. Amongst different layered materials, bright and robust defect-based single photon emitters have been observed within hexagonal boron nitride, a layered wide-bandgap semiconductor. Despite research efforts to date, the identities of the deep defects responsible for quantum emissions in hexagonal boron nitride remain unknown. In this theoretical work, I demonstrate that the strain-induced changes in emission frequencies depend o…
Successful synthesis of the nitrogenated holey two-dimensional structures C2N (Nat. Commun. 2015, 6, 1-7) using simply wet-chemical reaction offer a cost-effective way to generate other 2D materials with novel optical and electronic properties. Using the few-layer C2N as models, we have performed an ab initio study of electronic properties of layered C2N. Band gaps of this system exhibit monotone decreasing as the number of layers increase. And a direct-gap to indirect-gap transition at the bulk C2N. Besides, when we apply an out-of-plane electric field on few-layer C2N, the band gap of multil…
We demonstrate the successive appearance of the exciton, biexciton, and P band of the exciton-exciton scattering with increasing excitation power in the photoluminescence of indium selenide layered crystals. The strict energy and momentum conservation rules of the P band are used to reexamine the exciton binding energy. The new value $\geq 20$ meV is markedly higher than the currently accepted 14 meV, being however well consistent with the robustness of excitons up to room temperature. A peak controlled by the Sommerfeld factor is found near the bandgap ($\sim 1.36$ eV), which puts the questio…
The large family of layered transition-metal dichalcogenides is widely believed to constitute a second family of two-dimensional (2D) semiconducting materials that can be used to create novel devices that complement those based on graphene. In many cases these materials have shown a transition from an indirect bandgap in the bulk to a direct bandgap in monolayer systems. In this work we experimentally show that folding a 1H molybdenum disulphide (MoS2) layer results in a turbostratic stack with enhanced photoluminescence quantum yield and a significant shift to the blue by 90 meV. This is in c…
Sn/Ge substitution in ((C$_\textrm{n}$H$_{2\textrm{n}-1}$NH$_3$)$_2$PbI$_4$; n=3): An emerging 2D layered hybrid perovskites with enhanced optoelectronic properties$^†$
Producing monolayers and few-layers in high yield with environment-stability is still a challenge in hafnium disulphide (HfS2), which is a layered two-dimensional material of group-IV transition metal dichalcogenides, to reveal its unlocked electronic and optoelectronic applications. For the first time, to the best of our knowledge, we demonstrate a simple and cost-effective method to grow layered belt-like nano-crystals of HfS2 with surprisingly large interlayer spacing followed by its chemical exfoliation. Various microscopic and spectroscopic techniques reveal these as-grown crystals exfoli…
Organic-inorganic halide perovskite solar cells have attracted much attention due to their low-cost fabrication, flexibility, and high-power conversion efficiency. More recent efforts show that the reduction from three- to two-dimensions (2D) of organic-inorganic halide perovskites promises an exciting opportunity to tune their electronic properties. Here, we explore the effect of reduced dimensionality and heterostructure engineering on the intrinsic material properties, such as energy stability, bandgap and transport properties of 2D hybrid organic-inorganic halide perovskites using first-pr…
Black phosphorous (BP) is a layered semiconductor with high carrier mobility, anisotropic optical response and wide bandgap tunability. In view of its application in optoelectronic devices, understanding transient photo-induced effects is crucial. Here, we investigate by time- and angle-resolved photoemission spectroscopy BP in its pristine state and in the presence of Stark splitting, chemically induced by Cs ad-sorption. We show that photo-injected carriers trigger bandgap renormalization and a concurrent valence band attening caused by Pauli blocking. In the biased sample, photoexcitation l…
Black phosphorous (BP) is one of the most interesting layered materials, bearing promising potential for emerging electronic and optoelectronic device technologies. The crystalline structure of BP displays in-plane anisotropy in addition to the out-of-plane anisotropy characteristic to layered materials. Therefore, BP supports anisotropic optical and transport responses that can enable unique device architectures. Its thickness-dependent direct bandgap varies in the range of around 0.3-2.0 eV (from single-layer to bulk, respectively), making BP suitable to optoelectronics in a broad spectral r…
In two-dimensional materials research, oxidation is usually considered as a common source for the degradation of electronic and optoelectronic devices or even device failure. However, in some cases a controlled oxidation can open the possibility to widely tune the band structure of 2D materials. In particular, we demonstrate the controlled oxidation of titanium trisulfide (TiS$_3$), a layered semiconductor that has attracted much attention recently thanks to its quasi-1D electronic and optoelectronic properties and its direct bandgap of 1.1 eV. Heating TiS$_3$ in air above 300 °C gradually con…
Layered indium selenides ($In_{2}Se_{3}$) have recently been discovered to host robust out-of-plane and in-plane ferroelectricity in the $α$ and $β$' phases, respectively. In this work, we utilise angle-resolved photoelectron spectroscopy to directly measure the electronic bandstructure of $β'-In_{2}Se_{3}$, and compare to hybrid density functional theory (DFT) calculations. In agreement with DFT, we find the band structure is highly two-dimensional, with negligible dispersion along the c-axis. Due to n-type doping we are able to observe the conduction band minima, and directly measure the min…
Anisotropy refers to the property of a material exhibiting directionally dependent features. In this paper, we introduce black phosphorous (BP), the most stable allotrope of phosphorus in layered orthorhombic structure with a bandgap of 0.3 eV in bulk, as a unique 2D material in which electrons, phonons and their interactions with photons behave in a highly anisotropic manner within the plane of the layers. The unique anisotropic nature of BP thin films is revealed using angle-resolved Raman and infrared spectroscopies, together with angle-resolved transport study. For 15 nm thick BP, we measu…
Functionalization of atomically thin nanomaterials enables the tailoring of their chemical, optical, and electronic properties. Exfoliated black phosphorus, a layered two-dimensional semiconductor exhibiting favorable charge carrier mobility, tunable bandgap, and highly anisotropic properties, is chemically reactive and degrades rapidly in ambient conditions. In contrast, here we show that covalent aryl diazonium functionalization suppresses the chemical degradation of exfoliated black phosphorus even following weeks of ambient exposure. This chemical modification scheme spontaneously forms ph…
The electronic properties of single- and multi-cation transparent conducting oxides (TCOs) are investigated using first-principles density functional approach. A detailed comparison of the electronic band structure of stoichiometric and oxygen deficient In$_2$O$_3$, $α$- and $β$-Ga$_2$O$_3$, rock salt and wurtzite ZnO, and layered InGaZnO$_4$ reveals the role of the following factors which govern the transport and optical properties of these TCO materials: (i) the crystal symmetry of the oxides, including both the oxygen coordination and the long-range structural anisotropy; (ii) the electroni…
Magnetic layered ternary chalcogenides hold great promise for future spin-optoelectronic devices in the two dimensional limit. Understanding how the properties of the materials are impacted by magnetic ordering and the spin-orbit interactions is critically needed information for the development of applications. Ultrafast transient reflectance (TR) and photocurrent (PC) spectroscopies are combined with ab initio density functional theory (DFT) calculations to investigate the band structure and photoresponse of a layered magnetic semiconductor CrSiTe3 (CST) nanosheet in the paramagnetic (PM, 300…
Transition metal dichalcogenide (TMDC) monolayer has recently emerged as an important two-dimensional semiconductor with promising potentials for electronic and optoelectronic devices. Unlike semi-metallic graphene, layered TMDC has a sizable band gap. More interestingly, when thinned down to a monolayer, TMDC transforms from an indirect bandgap to a direct bandgap semiconductor, exhibiting a number of intriguing optical phenomena such as valley selective circular dichroism, doping dependent charged excitons, and strong photocurrent responses. However, the fundamental mechanism underlying such…
Many classes of two-dimensional (2D) materials have emerged as potential platforms for novel electronic and optical devices. However, the physical properties are strongly influenced by nanoscale heterogeneities in the form of edges, grain boundaries, and nucleation sites. Using combined tip-enhanced Raman scattering (TERS) and photoluminescence (TEPL) nano-spectroscopy and -imaging, we study the associated effects on the excitonic properties in monolayer WSe2 grown by physical vapor deposition (PVD). With <15 nm spatial resolution we resolve nonlocal nanoscale correlations of PL spectral inten…
We perform first-principles calculations to explore electronic, thermodynamic, and dielectric properties of two-dimensional (2D) layered, alkaline-earth hydroxides Ca(OH)2 and Mg(OH)2. We calculate the lattice parameters, exfoliation energies, and phonon spectra of monolayers and also investigate the thermal properties of these monolayers such as Helmholtz free energy, heat capacity at constant volume, and entropy as a function of temperature. We employ Density Functional Perturbation Theory (DFPT) to calculate the in-plane and out-of-plane static dielectric constant of the bulk and monolayer …
