X-ray Modeling of η Carinae and WR140 from SPH Simulations
Christopher M. P. Russell, Stanley P. Owocki, Michael F. Corcoran, Atsuo T. Okazaki, Thomas I. Madura
备注：
3 pages, 3 figures, to appear in "Four Decades of Research on Massive Stars: A Scientific Meeting in Honour of Anthony F. J. Moffatt", eds. L. Drissen, C. Robert, and N. St-Louis, ASP Conference Series
The colliding wind binary (CWB) systems η Carinae and WR140 provide unique laboratories for X-ray astrophysics. Their wind-wind collisions produce hard X-rays that have been monitored extensively by several X-ray telescopes, including RXTE. To interpret these X-ray light curves and spectra, we apply 3D hydrodynamic simulations of the wind-wind collision using smoothed particle hydrodynamics (SPH), with the recent improvements of radiative cooling and the acceleration of the stellar winds according to a β law. For both systems, the 2-10 keV RXTE light curves are well-reproduced in absolute units for most phases, but the light curve dips associated with the periastron passages are not well matched. In WR140, the dip is too weak, and in η Carinae, the large difference in wind speeds of the two stars leads to a hot, post-periastron bubble that produces excess emission toward the end of the X-ray minimum.
Eta Carinae is an ideal astrophysical laboratory for studying massive binary interactions and evolution, and stellar wind-wind collisions. Recent three-dimensional (3D) simulations set the stage for understanding the highly complex 3D flows in $η$ Car. Observations of different broad high- and low-ionization forbidden emission lines provide an excellent tool to constrain the orientation of the system, the primary's mass-loss rate, and the ionizing flux of the hot secondary. In this work we present the first steps towards generating synthetic observations to compare with available and future HS…
The colliding wind binary (CWB) systems η Carinae and WR140 provide unique laboratories for X-ray astrophysics. Their wind-wind collisions produce hard X-rays that have been monitored extensively by several X-ray telescopes, including RXTE. To interpret these RXTE X-ray light curves, we model the wind-wind collision using 3D smoothed particle hydrodynamics (SPH) simulations. Adiabatic simulations that account for the absorption of X-rays from an assumed point source at the apex of the wind-collision shock cone by the distorted winds can closely match the observed 2-10keV RXTE light curves of b…
We present results of full 3D hydrodynamical and radiative transfer simulations of the colliding stellar winds in the massive binary system Eta Carinae. We accomplish this by applying the SimpleX algorithm for 3D radiative transfer on an unstructured Voronoi-Delaunay grid to recent 3D smoothed particle hydrodynamics (SPH) simulations of the binary colliding winds. We use SimpleX to obtain detailed ionization fractions of hydrogen and helium, in 3D, at the resolution of the original SPH simulations. We investigate several computational domain sizes and Luminous Blue Variable primary star mass-l…
Eta Carinae is considered to be a massive colliding wind binary system with a highly eccentric (e \sim 0.9), 5.54-yr orbit. However, the companion star continues to evade direct detection as the primary dwarfs its emission at most wavelengths. Using three-dimensional (3-D) SPH simulations of Eta Car's colliding winds and radiative transfer codes, we are able to compute synthetic observables across multiple wavebands for comparison to the observations. The models show that the presence of a companion star has a profound influence on the observed HST/STIS UV spectrum and H-alpha line profiles, a…
We present the first 3D prints of output from a supercomputer simulation of a complex astrophysical system, the colliding stellar winds in the massive (>120 M_Sun), highly eccentric (e ~ 0.9) binary star system Eta Carinae. We demonstrate the methodology used to incorporate 3D interactive figures into a PDF journal publication and the benefits of using 3D visualization and 3D printing as tools to analyze data from multidimensional numerical simulations. Using a consumer-grade 3D printer (MakerBot Replicator 2X), we successfully printed 3D smoothed particle hydrodynamics (SPH) simulations of Et…
We perform three-dimensional gas-dynamical simulations and show that the asymmetric morphology of the blue and red-shifted components of the outflow at hundreds of astronomical units (AU) from the massive binary system eta Carinae can be accounted for from the collision of the free primary stellar wind with the slowly expanding dense equatorial gas. Owing to the very complicated structure of the century-old equatorial ejecta, that is not fully spatially resolved by observations, we limit ourselves to modelling the equatorial dense gas by one or two dense spherical clouds. Because of that we re…
The X-ray emission of $η$ Carinae shows multiple features at various spatial and temporal scales. The central constant emission (CCE) component is centred on the binary and arises from spatial scales much smaller than the bipolar Homunculus nebula, but likely larger than the central wind--wind collision region between the stars as it does not vary over the $\sim$2-3 month X-ray minimum when it can be observed. Using large-scale 3D smoothed particle hydrodynamics (SPH) simulations, we model both the colliding-wind region between the stars, and the region where the secondary wind collides with p…
The detection by Rest et al. (2012) of light echoes from $η$ Carinae has provided important new observational constraints on the nature of its 1840's era giant eruption. Spectra of the echoes suggest a relatively cool spectral temperature of about 5500K, lower than the lower limit of about 7000K suggested in the optically thick wind outflow analysis of Davidson (1987). This has lead to a debate about the viability of this steady wind model relative to alternative, explosive scenarios. Here we present an updated analysis of the wind outflow model using newer low-temperature opacity tabulations …
Recent work suggests that the mass-loss rate of the primary star (Eta A) in the massive colliding wind binary Eta Carinae dropped by a factor of 2-3 between 1999 and 2010. We present results from large- (r=1545au) and small- (r=155au) domain, 3D smoothed particle hydrodynamic (SPH) simulations of Eta Car's colliding winds for 3 Eta A mass-loss rates (2.4, 4.8, and 8.5 x 10^-4 M_sun/yr), investigating the effects on the dynamics of the binary wind-wind collision (WWC). These simulations include orbital motion, optically thin radiative cooling, and radiative forces. We find that Eta A's mass-los…
We analyze interferometric measurements of the Luminous Blue Variable Eta Carinae with the goal of constraining the rotational velocity of the primary star and probing the influence of the companion. Using 2-D radiative transfer models of latitude-dependent stellar winds, we find that prolate wind models with a ratio of the rotational velocity (vrot) to the critical velocity (vcrit) of W=0.77-0.92, inclination angle of i=60-90 degrees, and position angle PA=108-142 degrees reproduce simultaneously K-band continuum visibilities from VLTI/VINCI and closure phase measurements from VLTI/AMBER. Int…
We present 2D radiative transfer modeling of the Eta Carinae binary system accounting for the presence of a wind-wind collision (WWC) cavity carved in the optically-thick wind of the primary star. By comparing synthetic line profiles with HST/STIS spectra obtained near apastron, we show that the WWC cavity has a strong influence on multi-wavelength diagnostics. This influence is regulated by the modification of the optical depth in the continuum and spectral lines. We find that H-alpha, H-beta, and Fe II lines are the most affected by the WWC cavity, since they form over a large volume of the …
We investigate, using the modeling code SHAPE, the three-dimensional structure of the bipolar Homunculus nebula surrounding Eta Carinae, as mapped by new ESO VLT/X-Shooter observations of the H2 $λ=2.12125$ micron emission line. Our results reveal for the first time important deviations from the axisymmetric bipolar morphology: 1) circumpolar trenches in each lobe positioned point-symmetrically from the center and 2) off-planar protrusions in the equatorial region from each lobe at longitudinal (~55 degrees) and latitudinal (10-20 degrees) distances from the projected apastron direction of the…
Eta Carinae's historical light curve: evidence for cyclic Roche lobe overflow from the primary star
Instituto de Astr., Geofísica e Ciências Atmosf. da USP（圣保罗大学天文、地球物理和大气科学研究所）；Escola de Ciências e Tecnologia, Universidade Federal do Rio Grande do Norte（北里奥格兰德联邦大学科学与技术学院）；Instituto Nac. de Pesq. Espaciais/MCTI（国家空间研究院/科技部）；Instituto de Astrofísica de La Plata (CCT La Plata - CONICET/UNLP)（拉普拉塔天体物理研究所（拉普拉塔中心-阿根廷国家科学研究委员会/拉普拉塔国立大学））；Laboratório Nacional de Astrofísica（国家天体物理实验室）；Max Planck Institute for Radio Astronomy（马克斯·普朗克射电天文研究所）
Colliding wind binaries (CWBs) are unique laboratories for X-ray astrophysics. The massive stars in these systems possess powerful stellar winds with speeds up to $\sim$3000 km s$^{-1}$, and their collision leads to hot plasma (up to $\sim10^8$K) that emit thermal X-rays (up to $\sim$10 keV). Many X-ray telescopes have observed CWBs, including Suzaku, and our work aims to model these X-ray observations. We use 3D smoothed particle hydrodynamics (SPH) to model the wind-wind interaction, and then perform 3D radiative transfer to compute the emergent X-ray flux, which is folded through X-ray tele…
Close interactions and mass transfer in binary stars can lead to the formation of many different exotic stellar populations, but detailed modeling of mass transfer is a computationally challenging problem. Here, we present an alternate Smoothed Particle Hydrodynamics approach to the modeling of mass transfer in binary systems that allows a better resolution of the flow of matter between main-sequence stars. Our approach consists of modeling only the outermost layers of the stars using appropriate boundary conditions and ghost particles. We arbitrarily set the radius of the boundary and find th…
Spectroscopic monitoring with Mercator-HERMES over the past two years reveals that MWC 314 is a massive binary system composed of an early B-type primary LBV star and a less-luminous supergiant companion. We determine an orbital period Porb of 60.85 d from optical S II and Ne I absorption lines observed in this single-lined spectroscopic binary. We find an orbital eccentricity of e=0.26, and a large amplitude of the radial velocity curve of 80.6 km/s. The ASAS V light-curve during our spectroscopic monitoring reveals two brightness minima (ΔV~0.1 mag.) over the orbital period due to partial ec…
University of Oxford（牛津大学）；University of Reading（雷丁大学）；IUCAA（校际天文学与天体物理学中心）；University of New Hampshire（新罕布什尔大学）；NVIDIA Corporation（英伟达公司）；ASTRA LLC（ASTRA有限责任公司）；Lockheed Martin（洛克希德·马丁公司）；SRI International（SRI国际研究所）
Modeling and forecasting the solar wind-driven global magnetic field perturbations is an open challenge. Current approaches depend on simulations of computationally demanding models like the Magnetohydrodynamics (MHD) model or sampling spatially and temporally through sparse ground-based stations (SuperMAG). In this paper, we develop a Deep Learning model that forecasts in Spherical Harmonics space 2, replacing reliance on MHD models and providing global coverage at one minute cadence, improving over the current state-of-the-art which relies on feature engineering. We evaluate the performance …
We implemented sink particles in the adaptive mesh refinement (AMR) hydrodynamics code FLASH. Sink particles are created in regions of local gravitational collapse, and their trajectories and accretion can be followed over many dynamical times. We perform a series of tests including the time integration of circular and elliptical orbits, the collapse of a Bonnor-Ebert sphere and a rotating, fragmenting cloud core. We compare the collapse of a highly unstable singular isothermal sphere to the theory by Shu (1977), and show that the sink particle accretion rate is in excellent agreement with the…
