带限强度调制
Bandlimited Intensity Modulation
摘要:
本文提出了一种在带限强度调制直接检测(IM/DD)信道上的新的带宽有效信令方法。信道可以被建模为具有非负输入和加性高斯白噪声(AWGN)的带限信道。由于非负性约束,相干带限信道的标准方法不能在这里应用。先前建立的用于IM/DD信道的技术需要两倍于传统相干信道所需带宽的带宽。我们提出了一种方法,在不大于比特率的带宽中无符号间干扰地传输。这是通过将奈奎斯特或根奈奎斯特脉冲与恒定偏置相结合并使用高阶调制格式来实现的。事实上,我们可以用与相干传输相等的带宽进行传输。所需的平均光功率和带宽之间的权衡进行了研究。取决于所需的带宽,通过参数线性脉冲(所谓的“优于奈奎斯特”脉冲或根升余弦脉冲)获得最省电的传输。
英文摘要:
In this paper, the design and analysis of a new bandwidth-efficient signaling method over the bandlimited intensity-modulated direct-detection (IM/DD) channel is presented. The channel can be modeled as a bandlimited channel with nonnegative input and additive white Gaussian noise (AWGN). Due to the nonnegativity constraint, standard methods for coherent bandlimited channels cannot be applied here. Previously established techniques for the IM/DD channel require bandwidth twice the required bandwidth over the conventional coherent channel. We propose a method to transmit without intersymbol interference in a bandwidth no larger than the bit rate. This is done by combining Nyquist or root-Nyquist pulses with a constant bias and using higher-order modulation formats. In fact, we can transmit with a bandwidth equal to that of coherent transmission. A trade-off between the required average optical power and the bandwidth is investigated. Depending on the bandwidth required, the most power-efficient transmission is obtained by the parametric linear pulse, the so-called "better than Nyquist" pulse, or the root-raised cosine pulse.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。