arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 1105.5514cond-mat.mtrl-sci
收藏

钨和钽在高应变率和高温下的实验结果和本构模型

Experimental results and constitutive modelling for tungsten and tantalum at high strain rates and very high temperatures

G. P. Skoro, J. R. J. Bennett, T. R. Edgecock

摘要:

分析了最近报道的钨和钽的高应变率高温屈服应力的测量结果。在实验中达到的最高温度,基于加热和强调一个快速,高电流脉冲细导线,分别为2520 K和2720 K,钽和钨。钨和钽试验中的应变速率在500至1500 1/s的范围内。由Zerilli和Armstrong开发的本构方程的参数已被确定从实验数据和结果进行了比较,在较低的温度下获得的数据。

英文摘要:

Recently reported results of the high strain rates, high temperature measurements of the yield stress of tungsten and tantalum have been analyzed. The highest temperature reached in the experiment, based on heating and stressing a thin wire by a fast, high current pulse, was 2520 K and 2720 K, for tantalum and tungsten, respectively. The strain-rates in both the tungsten and tantalum tests were in the range from 500 to 1500 1/s. The parameters for the constitutive equation developed by Zerilli and Armstrong have been determined from the experimental data and the results have been compared with the data obtained at lower temperatures.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑