EUDET HCAL的校准原型
Calibration prototype for the EUDET HCAL
摘要:
电子产生几纳秒长的LED脉冲可调的幅度和光学系统分配的LED光的单光纤的照明器进行了说明。LED脉冲的特性由通过CAN总线连接到板上控制器的计算机控制。我们制作了一个原型,其中6个LED脉冲驱动器放置在尺寸为250 x 147 mm 2的4层PCB上。脉冲宽度恒定,长度为3 ns。其振幅可在0 ~ 1.2A范围内调谐。脉冲频率可在高达100 kHz的范围内设置。LED光通过直径为1 mm的光纤分布。在2 m的长度上,纤维每隔30 mm具有一个凹口,该凹口以\pm 20%的均匀性闪光。该系统预计用于校准嵌入闪烁片中的硅光电倍增器。
英文摘要:
The electronics producing a few nanoseconds long LED pulses tuneable in the amplitude and the optical system distributing the LED light to scintillators by a single optical fibre are described. The properties of the LED pulses are controlled by a computer connected via a CANbus to the controller on the board. We produced a prototype with 6 LED pulse drivers placed on a 4-layer PCB with dimension 250 x 147 mm2. The pulse width is constant and 3 ns long. Its amplitude can be tuned from zero to 1.2 A. The pulse frequency can be set in the range up to 100 kHz. The LED light is distributed by a 1 mm diameter optical fibre. On the length of 2 m the fibre has every 30 mm a notch which flashes light with homogeneity of \pm20%. The system is foreseen for calibration of silicon photomultipliers embedded in scintillation tiles.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。