边界效应对由正入射反射和透射测量确定超材料参数的影响
Boundary Effects on the Determination of Metamaterial Parameters from Normal Incidence Reflection and Transmission Measurements
摘要:
描述了一种用于仅基于外部测量或模拟来确定超材料的有效电磁参数的方法,该方法考虑了常规材料和超材料之间的界面处的边界效应。在界面处的平面波反射和透射系数被视为待确定的额外未知数,而不是明确地依赖于材料参数。因此,我们的技术是类似于微波测量中的线反射线(LRL)校准方法。折射率可以从不同厚度的两个样品的S参数确定。有效波阻抗需要附加的假设,即广义薄板过渡条件(GSTC)考虑边界效应。体介电常数和体磁导率的表达式就很容易得出了。我们的方法进行了验证,通过与使用尼科尔森-罗斯-威尔(NRW)的结果进行比较,用于确定在同轴线测量的普通材料的属性。利用从3-D全波模拟得到的S参数,我们测试的磁介电材料的方法。我们比较的结果,从我们的方法和传统的不考虑边界效应。此外,它表明,从我们的方法的结果是一致的参考平面位置的变化,而从其他方法的结果不一致。
英文摘要:
A method is described for the determination of the effective electromagnetic parameters of a metamaterial based only on external measurements or simulations, taking boundary effects at the interfaces between a conventional material and metamaterial into account. Plane-wave reflection and transmission coefficients at the interfaces are regarded as additional unknowns to be determined, rather than explicitly dependent on the material parameters. Our technique is thus analogous to the line-reflect-line (LRL) calibration method in microwave measurements. The refractive index can be determined from S-parameters for two samples of different thickness. The effective wave impedance requires the additional assumption that generalized sheet transition conditions (GSTCs) account for the boundary effects. Expressions for the bulk permittivity and permeability then follow easily. Our method is validated by comparison with the results using the Nicolson-Ross-Weir (NRW) for determining properties of an ordinary material measured in a coaxial line. Utilizing S-parameters obtained from 3-D full wave simulations, we test the method on magnetodielectric metamaterials. We compare the results from our method and the conventional one that does not consider boundary effects. Moreover, it is shown that results from our method are consistent under changes in reference plane location, whereas the results from other methods are not.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。