We present a quantitative confocal-microscopy study of the transient and final microstructure of particle-stabilised emulsions formed via demixing in a binary liquid. To this end, we have developed an image-analysis method that relies on structure factors obtained from discrete Fourier transforms of individual frames in confocal image sequences. Radially averaging the squared modulus of these Fourier transforms before peak fitting allows extraction of dominant length scales over the entire temperature range of the quench. Our procedure even yields information just after droplet nucleation, when the (fluorescence) contrast between the two separating phases is scarcely discernable in the images. We find that our emulsions are stabilised on experimental time scales by interfacial particles and that they are likely to have bimodal droplet-size distributions. We attribute the latter to coalescence together with creaming being the main coarsening mechanism during the late stages of emulsification and we support this claim with (direct) confocal-microscopy observations. In addition, our results imply that the observed droplets emerge from particle-promoted nucleation, possibly followed by a free-growth regime. Finally, we argue that creaming strongly affects droplet growth during the early stages of emulsification. Future investigations could clarify the link between quench conditions and resulting microstructure, paving the way for tailor-made particle-stabilised emulsions from binary liquids.
Assembly of colloidal particles on fluid interfaces is a promising technique for synthesizing two-dimensional micro-crystalline materials useful in fields as diverse as biomedicine1, materials science2, mineral flotation3 and food processing4. Current approaches rely on bulk emulsification methods, require further chemical and thermal treatments, and are restrictive with respect to the materials employed5-9. The development of methods that exploit the great potential of interfacial assembly for producing tailored materials have been hampered by the lack of understanding of the assembly process…
We have developed Norland Optical Adhesive (NOA) flow focusing devices, making use of the excellent solvent compatibility and surface properties of NOA to generate micron scale oil-in-water emulsions with polydispersities as low as 5%. While current work on microfluidic oil-in-water emulsification largely concerns the production of droplets with sizes on the order of 10s of micrometres, large enough that Brownian motion is negligible, our NOA devices can produce droplets with radii ranging from 2 μm to 12 μm. To demonstrate the utility of these emulsions as colloidal model systems we produce f…
We present a confocal-microscopy study of demixing and remixing in binary liquids containing colloidal particles. First, particle-stabilized emulsions have been fabricated by nucleation and growth of droplets upon cooling from the single-fluid phase. We show that their stability mainly derives from interfacial particles; the surplus of colloids in the continuous phase possibly provides additional stability. Upon heating these emulsions, we have observed the formation of polyhedral cellular networks of colloids, just before the system remixes. Given a suitable liquid-liquid composition, the ini…
The present article provides an overview of the recent progress in the direct force measurements between individual pairs of colloidal particles in aqueous salt solutions. Results obtained by two different techniques are being highlighted, namely with the atomic force microscope (AFM) and optical tweezers. One finds that the classical theory of Derjaguin, Landau, Verwey, and Overbeek (DLVO) represents an accurate description of the force profiles even in the presence of multivalent ions, typically down to distances of few nanometers. However, the corresponding Hamaker constants and diffuse lay…
We discuss the peculiarities of the Ohm law in dilute polyelectrolytes containing a relatively low concentration of the multiply-charged colloidal particles. It is demonstrated that in this conditions, the effective conductivity of polyelectrolyte is the linear function of colloidal particles concentration. This happens due to the change of electric field in the polyelectrolyte under the effect of colloidal particle polarization. Such mechanism gives grounds to propose the alternative scenario for the phenomenon observed experimentally.
The free energy landscape responsible for crystallization can be complex even for relatively simple systems like hard sphere and charged stabilized colloids. In this work, using hard-core repulsive Yukawa model, which is known to show complex phase behavior consisting of fluid, FCC and BCC phases, we studied the interplay between the free energy landscape and polymorph selection during crystallization. When the stability of the BCC phase with respect to the fluid phase is gradually increased by changing the temperature and pressure at a fixed fluid-FCC stability, the final phase formed by crys…
Hypothesis: New dynamic phenomena can be observed in evaporating free liquid films from colloidal solutions with bimodal particle size distribution. Such distributions are formed in a natural way in mixed (slightly turbid) solutions of cationic and anionic surfactants, where nanosized micelles coexist with micronsized precipitated particles. Experiment: Without evaporation of water, the films thin down to thickness < 100 nm. Upon water evaporation from the film, one observes spontaneous film thickening (above 300 nm) and appearance of a dynamic vortex with a spot of thinner film in the center.…
We describe a novel method of tracking the rotational motion of clusters of colloidal particles. Our method utilizes rigid body transfor- mations to determine the rotations of a cluster and extends conventional proven particle tracking techniques in a simple way, thus facilitating the study of rotational dynamics in systems containing or composed of colloidal clusters. We test our method by measuring dynamical properties of simulated Brownian clusters under conditions relevant to microscopy experiments. We then use the technique to track and describe the motions of a real colloidal cluster ima…
A theory is presented for the effective charge of colloidal particles in suspensions containing multivalent counterions. It is shown that if colloids are sufficiently strongly charged, the number of condensed multivalent counterion can exceed the bare colloidal charge leading to charge reversal. Charge renormalization in suspensions with multivalent counterions depends on a subtle interplay between the solvation energies of the multivalent counterions in the bulk and near the colloidal surface. We find that the effective charge is {\it not} a monotonically decreasing function of the multivalen…
We discuss the peculiarities of the Seebeck effect in stabilized electrolytes containing the colloidal particles. Its unusual feature is the two-stage character, with the linear increase of differential thermopower as the function of colloidal particles concentration $n_{\odot}$ during the first stage and dramatic drop of it at small $n_{\odot}$ during the second one (steady state). We show that the properties of the initial state are governed by the thermo-diffusion flows of the mobile ions of the stabilizing electrolyte medium itself and how the colloidal particles participate in formation o…
Bicontinuous, interfacially jammed emulsion gels (bijels) represent a class of soft solid materials in which interpenetrating domains of two immiscible fluids are stabilized by an interfacial colloidal monolayer. Such structures can be formed by arrested spinodal decomposition from an initially single-phase colloidal suspension. Here we explore by lattice Boltzmann simulation the possible effects of using magnetic colloids in bijels. This may allow additional control over the structure, during or after formation, by application of a magnetic field or field gradient. These effects are modest fo…
This short review is devoted to the simple process of drying a multi-component droplet consisting of a complex fluid containing a salt. These processes provide a fascinating subject for study. The explanation of the rich variety of patterns formed is not only an academic challenge, but a problem of practical importance, as applications are growing in medical diagnosis and improvement of coating/printing technology. The fundamental scientific problem is the study of the mechanism of micro- and nanoparticle self-organization in open systems. The specific fundamental problem to be solved, related…
Binary mixture of oppositely charged of colloids can be used to stabilize water-in-oil or oil-in-water emulsions. A Monte Carlo simulation study to address the effect of charge ratio of colloids on the stability of Pickering emulsions is presented. The colloidal particles at the interface are modeled as aligned dipolar hard spheres, with attractive interactions between unlike-charged and repulsive interaction between like-charged particles. The optimum composition (fraction of positively charged particles) required for the stabilization corresponds to a minimum in the interaction energy per pa…
To explore charge regulation (CR) in physicochemical and biophysical systems, we present a model of colloidal particles with sticky adsorption sites which account for the formation of covalent bonds between the hydronium ions and the surface functional groups. Using this model and Monte Carlo simulations, we find that the standard Ninham and Parsegian (NP) theory of CR leads to results which deviate significantly from computer simulations. The problem of NP approach is traced back to the use of bulk equilibrium constant to account for surface chemical reactions. To resolve this difficulty we p…
We report a study of the structure of droplets of colloidal gels containing dissolved sodium chloride. The components segregate and form intricate patterns. The salt crystalizes in fractal and multi-fractal dendritic forms which are determined by the material which forms the colloidal gel. Here potato starch, gelatine and carboxymethyl cellulose have been used. The substrate also plays a role in some cases. Photographs and micrographs at different level of magnification are shown.
Effects of substrate temperature, substrate wettability and particles concentration are experimentally investigated for evaporation of a sessile water droplet containing colloidal particles. Time-varying droplet shapes and temperature of the liquid-gas interface are measured using high-speed visualization and infrared thermography, respectively. The motion of the particles inside the evaporating droplet is qualitatively visualized by an optical microscope and profile of final particle deposit is measured by an optical profilometer. On a non-heated hydrophilic substrate, a ring-like deposit for…
The miniaturization of machines towards the micron and nanoscales requires the development of joint-like elements that enable and constrain motion. We present a facile method to create colloidal joints, that is, anisotropic colloidal particles containing surface mobile DNA linkers that control the motion range of bonded particles. We demonstrate quantitatively that we can control the flexibility of these colloidal joints by tuning the DNA linker concentration in the bond area. We show that the colloidal shape controls the range of motion that these colloidal joints enable, due to the finite-si…
Using molecular dynamics simulations, we study the motion of a closely fitting nanometer-size solid sphere in a fluid-filled cylindrical nanochannel at low Reynolds numbers and for a wide range of fluid-solid interactions corresponding to different wetting situations. For fluids that are not completely wetting we observe an interesting and novel adsorption phenomenon, in which the solid sphere, that was initially moving along the center of the tube, meanders across the channel and suddenly adsorbes onto the wall. Thereafter, the adsorbed sphere either {\it sticks} to the wall and remains motio…
A collection of spherical particles can be packed tightly together into an amorphous packing known as "random close packing" (RCP). This structure is of interest as a model for the arrangement of molecules in simple liquids and glasses, as well as the arrangement of particles in sand piles. We use confocal microscopy to study the arrangement of colloidal particles in an experimentally realized RCP state. We image a large volume containing more than 450,000 particles with a resolution of each particle position to better than 0.02 particle diameters. While the arrangement of the particles satisf…
The rheological response, in particular the non-linear response, to oscillatory shear is experimentally investigated in colloidal glasses. The glasses are highly concentrated binary hard-sphere mixtures with relatively large size disparities. For a size ratio of 0.2, a strong reduction of the normalized elastic moduli, the yield strain and stress and, for some samples, even melting of the glass to a fluid is observed upon addition of the second species. This is attributed to the more efficient packing, as indicated by the shift of random close packing to larger total volume fractions. This lea…
Colloidal suspensions and polyelectrolyte solutions containing multivalent counterions can exhibit some very counter-intuitive behavior usually associated with the low temperature physics. There are two particularly striking phenomena resulting from strong electrostatic correlations. One is the like-charge attraction and the second is the polyion overcharging. In this contribution we will concentrate on the problem of overcharging. In particular we will explore the kinetic limitation to colloidal charge inversion in suspensions containing multivalent counterions.
Experiments and simulations are used to study the kinetics of crystal growth in a mixture of magnetic and nonmagnetic particles suspended in ferrofluid. The growth process is quantified using both a bond order parameter and a mean domain size parameter. The largest single crystals obtained in experiments consist of approximately 1000 particles and form if the area fraction is held between 65-70% and the field strength is kept in the range of 8.5-10.5 Oe. Simulations indicate that much larger single crystals containing as many as 5000 particles can be obtained in impurity-free conditions within…
Colloidal particles or nanoparticles, with equal affinity for two fluids, are known to adsorb irreversibly to the fluid-fluid interface. We present large-scale computer simulations of the demixing of a binary solvent containing such particles. The newly formed interface sequesters the colloidal particles; as the interface coarsens, the particles are forced into close contact by interfacial tension. Coarsening is dramatically curtailed, and the jammed colloidal layer seemingly enters a glassy state, creating a multiply connected, solid-like film in three dimensions. The resulting gel contains p…
Insight in the structure of nanoparticle assemblies up to a single particle level is key to understand the collective properties of these assemblies, which critically depend on the individual particle positions and orientations. However, the characterization of large, micron sized assemblies containing small, 10-500 nanometer, sized colloids is highly challenging and cannot easily be done with the conventional light, electron or X-ray microscopy techniques. Here, we demonstrate that focused ion beam-scanning electron microscopy (FIB-SEM) tomography in combination with image processing enables …
A trapping mechanism for propelled colloidal particles based on an inhomogeneous drive is presented and studied by means of computer simulations. In experiments this method can be realized using photophoretic Janus particles driven by a light source, which shines through a shading mask and leads to an accumulation of the particles in the passive part. An equation for an accumulation parameter is derived using the effective inhomogeneous diffusion constant generated by the inhomogeneous drive. The impact of particle interaction on the trapping mechanism is studied, as well as the interplay betw…
In simulations and experiments, we study the drying of films containing mixtures of large and small colloidal particles in water. During drying, the mixture stratifies into a layer of the larger particles at the bottom with a layer of the smaller particles on top. We developed a model to show that a gradient in osmotic pressure, which develops dynamically during drying, is responsible for the segregation mechanism behind stratification.
Using confocal-microscopy we investigate the structure of binary mixtures of colloidal hard spheres with size ratio q=0.61. As a function of the packing fraction of the two particle species, we observe a marked change of the dominant wavelength in the pair correlation function. This behavior is in excellent agreement with a recently predicted structural crossover in such mixtures. In addition, the repercussions of structural crossover on the real-space structure of a binary fluid are analyzed. We suggest a relation between crossover and the lateral extension of networks containing only equally…
We simulate structural phase behavior of polymer-grafted colloidal particles by molecular Monte Carlo technique. Interparticle potential, which has a finite repulsive square-step outside a rigid core of the colloid, was previously confirmed via numerical self-consistent field calculation. This model potential is purely repulsive. We simulate these model colloids in the canonical ensemble in 2 dimensions and find that these particles containing no interparticle attraction self-assemble and align in a string-like assembly, at low temperature and high density. This string-like colloidal assembly …
Depending on the pH value and salt concentration of Al2O3 suspensions different microstructures can form. Especially the clustered one is of major interest for industrial purposes as found in the production of ceramics. In this paper we investigate the clustered microstructure by means of a coupled Stochastic Rotation Dynamics (SRD) and Molecular Dynamics (MD) simulation. In order to gain statistics within a system containing numerous clusters, large simulation volumes are needed. We present our parallel implementation of the simulation algorithm as well as a newly developed cluster detection …
Digital holographic microscopy is a fast three-dimensional (3D) imaging tool with many applications in soft matter physics. Recent studies have shown that electromagnetic scattering solutions can be fit to digital holograms to obtain the 3D positions of isolated colloidal spheres with nanometer precision and millisecond temporal resolution. Here we describe the results of new techniques that extend the range of systems that can be studied with fitting. We show that an exact multisphere superposition scattering solution can be used to fit holograms of colloidal clusters containing up to six sph…
The assembly and stabilization of a finite number of nanocrystals in contact in water could maximize the optical absorption per unit of material. Some local plasmonic properties exploited in applications, such as photothermia and optical signal amplification, would also be maximized which is important in the perspective of mass producing nanostructures at a lower cost. The main lock is that bringing charged particles in close contact requires the charges to be screened/suppressed, which leads to the rapid formation of micrometric aggregates. In this article, we show that aggregates containing …
The pattern and profile of a dried colloidal deposit formed after evaporation of a sessile water droplet containing polystyrene particles on a non-uniformly heated glass are investigated experimentally. In particular, the effects of temperature gradient across the substrate and particles size are investigated. The temperature gradient was imposed using Peltier coolers, and side visualization, infrared thermography, optical microscopy, and optical profilometry were employed to collect the data. On a uniformly heated substrate, a ring with an inner deposit is obtained, which is attributed to axi…
We study a nonequilibrium Langevin many-body system containing two 'test' particles and many 'background' particles. The test particles are spatially confined by a harmonic potential, and the background particles are driven by an external driving force. Employing numerical simulations of the model, we formulate an effective description of the two test particles in a nonequilibrium steady state. In particular, we investigate several different definitions of the effective force acting between the test particles. We find that the law of action and reaction does not hold for the total mechanical f…
In the past decade, classical dynamical density functional theory (DDFT) has been developed and widely applied to the Brownian dynamics of interacting colloidal particles. One of the possible derivation routes of DDFT from the microscopic dynamics is via the Mori-Zwanzig-Forster projection operator technique with slowly varying variables such as the one-particle density. Here, we use the projection operator approach to extend DDFT into various directions: first, we generalize DDFT toward mixtures of $n$ different species of spherical colloidal particles. We show that there are in general nontr…
This paper explores structural, interfacial and thermal properties of two types of Pickering emulsions containing alpha-cyclodextrin inclusion complexes: on one hand, emulsions were obtained between aqueous solutions of alpha-cyclodextrin and different oils (fatty acids, olive oil, silicone oil) and on the other hand, emulsions were obtained between these oils, water and micro or nano-platelet suspensions with inclusion complexes of hydrophobically-modified polysaccharides. The emulsions exhibit versatile properties according to the molecular architecture of the oils. Experiments were performe…
Colloidal crystals exhibit structural color without any color pigment due to the crystals' periodic nanostructure, which can interfere with visible light. This crystal structure is iridescent as the resulting color changes with the viewing or illumination angle, which limits its use for printing or displays. To eliminate the iridescent property, it is important to make the packing of the colloidal nanoparticles disordered. Here, we introduce a drop-casting method where a droplet of a water- ethanol mixture containing monodisperse polymer-coated silica nanoparticles creates a relatively uniform…
When a sinusoidal (ac) field is applied to a suspension containing nonlinear dielectric particles, the electrical response will generally consist of ac fields at frequencies of the higher-order harmonics. The situation is further complicated by an intrinsic dielectric dispersion which often occurs due to the surface conductivity or inhomogeneous structure of the particles. We perform a perturbation method to investigate the effect of intrinsic dielectric dispersion on the harmonics of local field as well as induced dipole moment. The results showed, for weak intrinsic dispersion strength, the …
We consider the Asakura-Oosawa-Vrij model of hard sphere colloids and ideal polymer coils in contact with a planar hard wall at (colloidal) liquid-gas coexistence. Using extensive numerical density functional calculations, the liquid-gas, wall-liquid and wall-gas interfacial free energies are calculated. The results are inserted into Young's equation to obtain the contact angle between the liquid-gas interface and the wall. As a function of polymer fugacity this angle exhibits discontinuities of slope (``kinks'') upon crossing first-order surface phase transitions located on the gas branch of …
When a drop containing colloidal particles evaporates on a surface, a circular stain made of these particles is often observed due to an internal flow toward the contact line. To hinder this effect, several approaches have been proposed such as flow modification by addition of surfactants or control of the interactions between the particles. All of these strategies involve the liquid phase while maintaining the drying process. However, substitution of evaporation by absorption into the substrate of the solvent has been investigated less. Here, we show that a droplet containing colloidal partic…
We investigate deposit patterns and associated morphology formed after the evaporation of an aqueous droplet containing mono- and bi-dispersed colloidal particles. In particular, the combined effect of substrate heating and particle diameter is investigated. We employ high-speed visualization, optical microscopy and scanning electron microscopy to characterize the evaporating droplets, particle motion, and deposit morphology, respectively. In the context of mono-dispersed colloidal particles, an inner deposit and a typical ring form for smaller and larger particles, respectively, on a nonheate…
We describe a method to simulate the dynamics of charged colloidal particles suspended in a liquid containing dissociated ions and salt ions. Regimes of prime current interest are those of large volume fraction of colloids, highly charged particles and low salt concentrations. A description which is tractable under these conditions is obtained by treating the small dissociated and salt ions as continuous fields, while keeping the colloidal macroions as discrete particles. For each spatial configuration of the macroions, the electrostatic potential arising from all charges in the system is dete…
Over the past few decades the experimental literature has consistently reported observations of attraction between like-charged colloidal particles and macromolecules in solution. Examples include nucleic acids and colloidal particles in bulk solution and under confinement, and biological liquid-liquid phase separation. This observation is at odds with the intuitive expectation of an interparticle repulsion that decays monotonically with distance. Although attraction between like-charged particles can be theoretically rationalised in the strong-coupling regime, for example, in the presence of …
Langevin Dynamics simulations are used to study the effect of shear on a two-dimensional colloidal crystal confined by structured parallel walls. When walls are sheared very slowly, only two or three crystalline layers next to the walls move along with them, while the inner layers of the crystal are only slightly tilted. At higher shear velocities, this inner part of the crystal breaks into several pieces with different orientations. The velocity profile across the slit is reminiscent of shear-banding in flowing soft materials, where liquid and solid regions coexist; the difference, however, i…
The vertical drying of a colloidal film containing rod-like particles was studied by means of kinetic Monte Carlo (MC) simulation. The problem was approached using a two-dimensional square lattice and the rods were represented as linear $k$-mers (i.e., particles occupying $k$ adjacent sites). The initial state before drying was produced using a model of random sequential adsorption (RSA) with isotropic orientations of the $k$-mers (orientation of the $k$-mers along horizontal $x$ and vertical $y$ directions are equiprobable). In the RSA model, overlapping of the $k$-mers is forbidden. During t…
We experimentally investigate the profile and morphology of the ring-like deposits obtained after evaporation of a sessile water droplet containing polystyrene colloidal particles on a hydrophilic glass substrate. In particular, the coupled effect of particle size and concentration are studied. The deposits were qualitatively visualized under an optical microscope and profile of the ring was measured by an optical profilometer. The profile of the ring resembles a partial torus-like shape for all cases of particles size and concentration. The cracks on the surface of the ring were found to occu…
Unconventional Growth Kinetics and Fractal Interfaces of Colloidal Phase Separation in Active Liquids
Indian Institute of Science Education and Research Pune（印度科学教育研究所浦那分校）；Indian Institute of Technology (BHU) Varanasi（瓦拉纳西印度理工学院（贝拿勒斯印度教大学））；School of Physical Sciences, Jawaharlal Nehru University（贾瓦哈拉尔·尼赫鲁大学物理科学学院）
Colloidal systems are often modelled as fluids of hard particles (possibly with an additional soft attraction, e.g. caused by polymers also contained in the suspension). in simulations of such systems, the virial theorem cannot be straightforwardly applied to obtain the components of the pressure tensor. In systems confined by walls, it is hence also not straightforward to extract the excess energy due to the wall (the "wall tension") from the pressure tensor anisotropy. A comparative evaluation of several methods to circumvent this problem is presented, using as examples fluids of hard sphere…
We present a theoretical framework to investigate the microscopic structure of concentrated hard-sphere colloidal suspensions under strong shear flows by fully taking into account the boundary-layer structure of convective diffusion. We solve the pair Smoluchowski equation with shear separately in the compressing and extensional sectors of the solid angle, by means of matched asymptotics. A proper, albeit approximate, treatment of the hydrodynamic interactions in the different sectors allows us to construct a potential of mean force containing the effect of the flow field on pair correlations.…
Charged surfaces in contact with liquids containing ions are accompanied in equilibrium by an electric double layer consisting of a layer of electric charge on the surface that is screened by a diffuse ion cloud in the bulk fluid. This screening cloud determines not only the interactions between charged colloidal particles or polyelectrolytes and their self-assembly into ordered structures, but it is also pivotal in understanding energy storage devices, such as electrochemical cells and supercapacitors. However, little is known to what spatial complexity the electric double layers can be desig…
I model the drying of a liquid film containing small and big colloid particles. Fortini et al. [A. Fortini et al, Phys. Rev. Lett. 116, 118301 (2016)] studied these films with both computer simulation and experiment. They found that at the end of drying the mixture had stratified with a layer of the smaller particles on top of the big particles. I develop a simple model for this process. The model has two ingredients: arrest of the diffusion of the particles at high density, and diffusiophoretic motion of the big particles due to gradients in the concentration of the small particles. The model…
