We present a theory which describes the transport properties of the interfacial region with respect to heat and mass transfer. Postulating the local Gibbs relation for a continuous description inside the interfacial region, we derive the description of the Gibbs surface in terms of excess densities and fluxes along the surface. We introduce overall interfacial resistances and conductances as the coefficients in the force-flux relations for the Gibbs surface. We derive relations between the local resistivities for the continuous description inside the interfacial region and the overall resistances of the surface for transport between the two phases for a mixture. It is shown that interfacial resistances depend among other things on the enthalpy profile across the interface. Since this variation is substantial the coupling between heat and mass flow across the surface are also substantial. In particular, the surface puts up much more resistance to the heat and mass transfer then the homogeneous phases over a distance comparable to the thickness of the surface. This is the case not only for the pure heat conduction and diffusion but also for the cross effects like thermal diffusion. For the excess fluxes along the surface and the corresponding thermodynamic forces we derive expressions for excess conductances as integrals over the local conductivities along the surface. We also show that the curvature of the surface affects only the overall resistances for transport across the surface and not the excess conductivities along the surface.
On the composition dependence of the microscopic structure, thermodynamic, dynamic and dielectric properties of water-dimethyl formamide model mixtures. Molecular dynamics simulation results
Phase transitions study of the liquid crystal DIO with a ferroelectric nematic, a nematic and an intermediate phase and of mixtures with the ferroelectric nematic compound RM734 by adiabatic scanning calorimetry
Enskog kinetic theory of binary granular suspensions: heat flux and stability analysis of the homogeneous steady state
进一步考虑先前采用的多组分颗粒悬浮液的Enskog动力学理论[Gómez González,Khalil和Garzó,Phys. Rev. E \textbf{101},012904(2020)],以确定与热通量相关的四个传输系数。这些输运系数通过求解Enskog方程通过应用Chapman-Enskog方法在局部版本的均匀状态。在稳态条件下,通过考虑所谓的第二Sonine近似的分布函数的每个物种的热通量输运系数的显式形式提供。他们的定量变化的混合物的控制参数(质量和直径,恢复系数,浓度,体积分数,和背景温度)的证明和结果表明,在一般的热通量输运系数对非弹性的依赖性是明显不同的情况下发现的气相(\emph{dry}颗粒混合物)。作为一般结果的应用,通过求解线性化的Navier-Stokes流体动力学方程,分析了均匀定常状态的稳定性。线性稳定性分析(适用于与平均自由程相比较长的波长)表明,横向和纵向模式总是稳定的足够长的波长激发。这一结论与以前的单组分和(稀)bidisperse颗粒悬浮液的结果,但在干燥(无气相)颗粒混合物中发现在以前的工作中的不稳定性形成对比。