A frequency-stabilized light source emitting at 556 nm is realized by frequency-doubling a 1112-nm laser, which is phase-locked to a fiber-based optical frequency comb. The 1112-nm laser is either an ytterbium (Yb)-doped distributed feedback fiber laser or a master-slave laser system that uses an external cavity diode laser as a master laser. We have achieved the continuous frequency stabilization of the light source over a five-day period. With the light source, we have completed the second-stage magneto-optical trapping (MOT) of Yb atoms using the 1S0 - 3P1 intercombination transition. The temperature of the ultracold atoms in the MOT was 40 uK when measured using the time-of-flight method, and this is sufficient for loading the atoms into an optical lattice. The fiber-based frequency comb is shown to be a useful tool for controlling the laser frequency in cold-atom experiments.
We developed a high-power laser system at a wavelength of 399 nm for laser cooling of ytterbium atoms with ultraviolet laser diodes. The system is composed of an external cavity laser diode providing frequency stabilized output at a power of 40 mW and another laser diode for amplifying the laser power up to 220 mW by injection locking. The systematic method for optimization of our injection locking can also be applied to high power light sources at any other wavelengths. Our system, which does not depend on complex nonlinear frequency-doubling, has great importance for implementing transportab…
In this paper we present the realization of a compact, high-power laser system able to excite the Ytterbium clock transition at 578 nm. Starting from an external-cavity laser based on a quantum dot chip at 1156 nm with an intra-cavity electro-optic modulator, we were able to obtain up to 60 mW of visible light at 578 nm via frequency doubling. The laser is locked with a 500 kHz bandwidth to a ultra-low-expansion glass cavity stabilized at its zero coefficient of thermal expansion temperature through an original thermal insulation and correction system. This laser allowed the observation of the…
We demonstrate a 1.4 W continuous wavelength (CW) laser at 243.1 nm. The radiation is generated through frequency quadrupling the output of a ytterbium-doped fiber amplifier system which produces $>$ 10 W of CW power at 972.5 nm. We demonstrate absolute frequency control by locking the laser to an optical frequency comb and exciting the 1S-2S transition in atomic hydrogen. This frequency-stabilized, high-power deep-UV laser should be of significant interest for precision spectroscopy of simple and exotic atoms, two-photon laser cooling of hydrogen, and Raman spectroscopy.
We have developed an optical lattice clock that can operate in dual modes: a strontium (Sr) clock mode and an ytterbium (Yb) clock mode. Dual-mode operation of the Sr-Yb optical lattice clock is achieved by alternately cooling and trapping $^{87}$Sr and $^{171}$Yb atoms inside the vacuum chamber of the clock. Optical lattices for Sr and Yb atoms were arranged with horizontal and vertical configurations, respectively, resulting in a small distance of the order of 100 $μ$m between the trapped Sr and Yb atoms. The $^{1}$S$_{0}$-$^{3}$P$_{0}$ clock transitions in the trapped atoms were interrogate…
A stable light source obtained using sum-frequency generation (SFG) is developed for high-resolution spectroscopy at 578 nm. Hyperfine transitions of molecular iodine are observed by using the SFG light source with saturation spectroscopy. The light source is frequency stabilized to the observed hyperfine transition and achieves a stability of 2*10-12 for a 1-s averaging time. The absolute frequency of the light source stabilized on the a1 component of the R(37)16-1 transition is determined as 518304551833 (2) kHz. This transition serves as a frequency reference for the 1S0 - 3P0 optical clock…
We developed a laser system for the spectroscopy of the clock transition in ytterbium (Yb) atoms at 578 nm based on an interference-filter stabilized external-cavity diode laser (IFDL) emitting at 1156 nm. Owing to the improved frequency-to-current response of the laser-diode chip and the less sensitivity of the IFDL to mechanical perturbations, we succeeded in stabilizing the frequency to a high-finesse ultra-low-expansion glass cavity with a simple current feedback system. Using this laser system, we performed high-resolution clock spectroscopy of Yb and found that the linewidth of the stabi…
We demonstrate a diode laser system operating at 399 nm that is stabilized to the ${\rm 6s^{2}\ {^1}S_{0} - 6s6p\ {^1}P_{1}}$ electric dipole transition in ytterbium (Yb) atoms in a hollow-cathode lamp. The frequency stability of the laser reached $1.1 \times 10^{-11}$ at an averaging time of $τ= 1\ \mathrm{s}$. We performed an absolute frequency measurement using an optical frequency comb and determined that the absolute frequency of the laser stabilized to the ${\rm {^1}S_{0} - {^1}P_{1}}$ transition in $^{174}\mathrm{Yb}$ was 751 526 522.26(9) MHz. We also investigated several systematic fr…
We report a high-resolution microscope system for imaging ultracold ytterbium atoms trapped in a two-dimensional optical lattice. By using the ultraviolet strong transition combined with a solid immersion lens and high-resolution optics, our system resolved individual sites in an optical lattice with a 544-nm spacing. Without any cooling mechanism during the imaging process, the deep potential required to contain the atoms was realized using a combination of a shallow ground-state and a deep excited-state potentials. The lifetime and limitations of this setup were studied in detail.
We have experimentally realized a hybrid trap for ultracold paramagnetic rubidium and diamagnetic ytterbium atoms by combining a bichromatic optical dipole trap for ytterbium with a Ioffe-Pritchard-type magnetic trap for rubidium. In this hybrid trap, sympathetic cooling of five different ytterbium isotopes through elastic collisions with rubidium was achieved. A strong dependence of the interspecies collisional cross section on the mass of the ytterbium isotope was observed.
Optical frequency measurements of the intercombination line $(6s^{2})\,^{1}S_{0} -(6s6p)\,^{3}P_{1}$ in the isotopes of ytterbium are carried out with the use of sub-Doppler fluorescence spectroscopy on an atomic beam. A dispersive signal is generated to which a master laser is locked, while frequency counting of an auxiliary beat signal is performed via a frequency comb referenced to a hydrogen maser. The relative separations between the lines are used to evaluate the $^{3}P_{1}$-level magnetic dipole and electric quadrupole constants for the fermionic isotopes. The center of gravity for the …
We report the direct excitation of the highly forbidden (6s^2) 1S0 - (6s6p) 3P0 optical transition in two odd isotopes of ytterbium. As the excitation laser frequency is scanned, absorption is detected by monitoring the depletion from an atomic cloud at ~70 uK in a magneto-optical trap. The measured frequency in 171Yb (F=1/2) is 518,295,836,593.2 +/- 4.4 kHz. The measured frequency in 173Yb (F=5/2) is 518,294,576,850.0 +/- 4.4 kHz. Measurements are made with a femtosecond-laser frequency comb calibrated by the NIST cesium fountain clock and represent nearly a million-fold reduction in uncertai…
Wavelengths in the telecommunication window (~1.25-1.65 microns) are ideal for quantum communication due to low transmission loss in fiber networks. To realize quantum networks operating at these wavelengths, long-lived quantum memories that couple to telecom-band photons with high efficiency need to be developed. We propose coupling neutral ytterbium atoms, which have a strong telecom-wavelength transition, to a silicon photonic crystal cavity. Specifically, we consider the 3P0-3D1 transition in neutral 171Yb to interface its long-lived nuclear spin in the metastable 3P0 'clock' state with a …
We present a high-power optical parametric oscillator-based frequency comb in the mid-infrared wavelength region using periodically poled lithium niobate. The system is synchronously pumped by a 10-W femtosecond Yb:fiber laser centered at 1.07 um and is singly resonant for the signal. The idler (signal) wavelength can be continuously tuned from 2.8 to 4.8 um (1.76 to 1.37 um) with a simultaneous bandwidth as high as 0.3 um and a maximum average idler output power of 1.50 W. We also demonstrate the performance of the stabilized comb by recording the heterodyne beat with a narrow-linewidth diode…
The development of a transportable microwave frequency standard based on the ground-state transition of $^{171}\mathrm{Yb^{+}}$ at ~12.6 GHz requires a compact laser system for cooling the ions, clearing out of long-lived states and also for photoionisation. In this paper, we describe the development of a suitable compact laser system based on a 6U height rack-mounted arrangement with overall dimensions $260 \times 194 \times 335$ mm. Laser outputs at 369 nm (for cooling), 399 nm (photoionisation), 935 nm (repumping) and 760 nm (state clearout) are combined in a fiber arrangement for delivery …
We have developed a technique to measure the absolute frequencies of optical transitions by using an evacuated Rb-stabilized ring-cavity resonator as a transfer cavity. We study possible wavelength-dependent errors due to dispersion at the cavity mirrors by measuring the frequency of the same transition in the $D_2$ line of Cs at three cavity lengths. We find no discernable change in values within our error of 30 kHz. Our values are consistent with measurements using the frequency-comb technique and have similar accuracy.
Microresonator-based soliton frequency combs - microcombs - have recently emerged to offer low-noise, photonic-chip sources for optical measurements. Owing to nonlinear-optical physics, microcombs can be built with various materials and tuned or stabilized with a consistent framework. Some applications require phase stabilization, including optical-frequency synthesis and measurements, optical-frequency division, and optical clocks. Partially stabilized microcombs can also benefit applications, such as oscillators, ranging, dual-comb spectroscopy, wavelength calibration, and optical communicat…
We present and investigate different external cavity diode laser (ECDL) configurations for the manipulation of neutrals atoms, wavelength-stabilized by a narrow-band high transmission interference filter. A novel diode laser, providing high output power of more than 1 W, with a linewidth of less than 200 kHz, based on a self-seeded tapered amplifier chip has been developed. Additionally, we compare the optical and spectral properties of two laser systems based on common laser diodes, differing in their coating, as well as one, based on a distributed-feedback (DFB) diode. The linear cavity setu…
We report a mode-locked Ti:sapphire femtosecond laser with 5GHz repetition rate. Spectral broadening of the 24 fs pulses in a microstructured fiber yields an octave-spanning spectrum and permits self-referencing and active stabilization of the emitted femtosecond laser frequency comb (FLFC). The individual modes of the 5GHz FLFC are resolved with a high-resolution spectrometer based on a virtually imaged phased array (VIPA) spectral disperser. Isolation of single comb elements at a microwatt average power level is demonstrated. The combination of the high-power, frequency-stabilized 5GHz laser…
We report the construction and characterization of a narrow-linewidth laser system to interrogate the E2 clock transitions at 436 nm of ytterbium ions trapped in end-cap traps. The 871 nm seed laser at the fundamental frequency is referenced to a 10 cm long notched ULE cavity. The output of the laser system is delivered to a narrow-linewidth femtosecond fiber comb, which has been referenced to an ultrastable 698 nm laser, with a phase noise-canceled fiber link. The beat between the laser and the comb shows a sub-Hz linewidth, and with a stability better than 2E-15@1~100 s. The performance of t…
We present a laser system with a linewidth and long-term frequency stability at the 50 kHz level. It is based on a Ti:Sapphire laser emitting radiation at 882 nm which is referenced to an atomic transition. For this, the length of an evacuated transfer cavity is stabilized to a reference laser at 780 nm locked to the $^{85}$Rb D$_2$-line via modulation transfer spectroscopy. Gapless frequency tuning of the spectroscopy laser is realized using the sideband locking technique to the transfer cavity. In this configuration, the linewidth of the spectroscopy laser is derived from the transfer cavity…
We report a stability below $7\times 10{}^{-17}$ of two independent optical lattice clocks operating with bosonic ${}^{88}$Sr isotope. The value (429228066418008.3(1.9)${}_{syst}$(0.9)${}_{stat}$~Hz) of the absolute frequency of the ${}^{1}S_{0}$ - ${}^{3}P_{0}$ transition was measured with an optical frequency comb referenced to the local representation of the UTC by the 330 km-long stabilized fibre optical link. The result was verified by series of measurements on two independent optical lattice clocks and agrees with recommendation of Bureau International des Poids et Mesures.
We report the frequency noise suppression of a 674nm diode laser by phase-locking it to a 1560nm cavity-stabilized laser, using a commercial optical frequency comb. By phase-locking the frequency comb to the narrow reference at telecom wavelength we were able to phase-coherently distribute the reference stability across the optical spectrum. Subsequently, we used one of the comb teeth as an optical reference for a 674nm external cavity diode laser. We demonstrated the locked 674nm laser frequency stability by comparing it to an independent cavity-stabilized laser of the same wavelength and by …
This article describes the recent progress of optical lattice clocks with neutral strontium ($^{87}$Sr), ytterbium ($^{171}$Yb) and mercury ($^{199}$Hg) atoms. In particular, we present frequency comparison between the clocks locally via an optical frequency comb and between two Sr clocks at remote sites using a phase-stabilized fibre link. We first review cryogenic Sr optical lattice clocks that reduce the room-temperature blackbody radiation shift by two orders of magnitude and serve as a reference in the following clock comparisons. Similar physical properties of Sr and Yb atoms, such as tr…
Assemblies of Rydberg atoms subject to resonant dipole-dipole interactions form Frenkel excitons. We show that van-der-Waals shifts can significantly modify the exciton wave function, whenever atoms approach each other closely. As a result, attractive excitons and repulsive van-der-Waals interactions can be combined to form stable one-dimensional atom chains, akin to bound aggregates. Here the van-der-Waals shifts ensure a stronger homogeneous delocalisation of a single excitation over the whole chain, enabling it to bind up to six atoms. When brought into unstable configurations, such Rydberg…
The implementation of a combination of continuous weak measurement and classical feedback provides a powerful tool for controlling the evolution of quantum systems. In this work, we investigate the potential of this approach from three perspectives. First, we consider a double-well system in the classical large-atom-number limit, deriving the exact equations of motion in the presence of feedback. Second, we consider the same system in the limit of small atom number, revealing the effect that quantum fluctuations have on the feedback scheme. Finally, we explore the behavior of modest sized Hubb…
