具有单一纳米凹凸的钌表面与平坦钌表面之间接触的动力学:分子动力学模拟
Dynamics of the contact between a ruthenium surface with a single nanoasperity and a flat ruthenium surface: Molecular dynamics simulations
摘要:
我们通过分子动力学模拟研究了一对表面(具有模仿钌的特性)之间的接触动力学。特别是,我们研究了钌表面与一个单一的nanoasperity和一个平坦的钌表面之间的接触。这种模拟的结果表明,接触行为是高度可变的。本研究的目的是调查这种变异性的来源和程度。我们发现,在压缩过程中,接触力位移曲线的行为是可重复的,而在接触分离,行为是高度可变的。对接触表面的检查表明,两种分离机制正在运行,并导致了这种变化。一种机制对应于在两个表面之间形成桥,当表面被拉开时,桥塑性拉伸,并最终在剪切中分离。这导致分离后的形态,其中在两个表面上存在相对的粗糙体。这种塑性分离/桥形成机制导致大的分离功。另一种机制是一种更脆的模式,其中裂纹传播穿过粗糙体的基部(略低于粗糙体/基材接合处),导致分离后一个表面或另一个表面上的大部分粗糙体和相对表面上面对该粗糙体的轻微凹陷。该失效模式对应于较小的分离功。一个单一的机制在其中运行。此外,由主要表现出类似脆性行为的材料制成的触头将倾向于需要比由类似延性的触头材料制成的触头更低的分离功。
英文摘要:
We study the dynamics of the contact between a pair of surfaces (with properties designed to mimic ruthenium) via molecular dynamics simulations. In particular, we study the contact between a ruthenium surface with a single nanoasperity and a flat ruthenium surface. The results of such simulations suggest that contact behavior is highly variable. The goal of this study is to investigate the source and degree of this variability. We find that during compression, the behavior of the contact force displacement curves is reproducible, while during contact separation, the behavior is highly variable. Examination of the contact surfaces suggest that two separation mechanism are in operation and give rise to this variability. One mechanism corresponds to the formation of a bridge between the two surfaces that plastically stretches as the surfaces are drawn apart and eventually separates in shear. This leads to a morphology after separation in which there are opposing asperities on the two surfaces. This plastic separation/bridge formation mechanism leads to a large work of separation. The other mechanism is a more brittle-like mode in which a crack propagates across the base of the asperity (slightly below the asperity/substrate junction) leading to most of the asperity on one surface or the other after separation and a slight depression facing this asperity on the opposing surface. This failure mode corresponds to a smaller work of separation. those in which a single mechanism operates. Furthermore, contacts made from materials that exhibit predominantly brittle-like behavior will tend to require lower work of separation than those made from ductile-like contact materials.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。