arXiv 1003.37522010-03-19quant-phcond-mat.mes-hall

Measuring nanomechanical motion with an imprecision far below the standard quantum limit

G. Anetsberger, E. Gavartin, O. Arcizet, Q. P. Unterreithmeier, E. M. Weig, M. L. Gorodetsky, J. P. Kotthaus, T. J. Kippenberg

DOI：: 10.1103/PhysRevA.82.061804

阅读 PDF ↗

arXiv 页面 ↗HTML 原文 ↗

英文摘要相关论文

英文摘要：

We demonstrate a transducer of nanomechanical motion based on cavity enhanced optical near-fields capable of achieving a shot-noise limited imprecision more than 10 dB below the standard quantum limit (SQL). Residual background due to fundamental thermodynamical frequency fluctuations allows a total imprecision 3 dB below the SQL at room temperature (corresponding to 600 am/Hz^(1/2) in absolute units) and is known to reduce to negligible values for moderate cryogenic temperatures. The transducer operates deeply in the quantum backaction dominated regime, prerequisite for exploring quantum backaction, measurement-induced squeezing and accessing sub-SQL sensitivity using backaction evading techniques.

机构、总结、中文摘要均由AI分析而来，可能存在错误，请以论文正文为准。

阅读原文

阅读 PDF ↗

arXiv 页面 ↗HTML 原文 ↗

本文内容

英文摘要相关论文

机构、总结、中文摘要均由AI分析而来，可能存在错误，请以论文正文为准。

继续探索

相关论文

Near-field cavity optomechanics with nanomechanical oscillators

Cavity-enhanced radiation pressure coupling between optical and mechanical degrees of freedom allows quantum-limited position measurements and gives rise to dynamical backaction enabling amplification and cooling of mechanical motion. Here we demonstrate purely dispersive coupling of high Q nanomechanical oscillators to an ultra-high finesse optical microresonator via its evanescent field, extending cavity optomechanics to nanomechanical oscillators. Dynamical backaction mediated by the optical dipole force is observed, leading to laser-like coherent nanomechanical oscillations solely due to r…

2009-09-07cond-mat.mes-hallquant-ph

Measuring nanomechanical motion with a microwave cavity interferometer

In recent years microfabricated microwave cavities have been extremely successful in a wide variety of detector applications. In this article we focus this technology on the challenge of quantum-limited displacement detection of a macroscopic object. We measure the displacement of a nanomechanical beam by capacitively coupling its position to the resonant frequency of a superconducting transmission-line microwave cavity. With our device we realize near state-of-the-art mechanical force sensitivity (3 $\rm{aN/\sqrt{Hz}}$) and thus add to only a handful of techniques able to measure thermomechan…

2008-04-07cond-mat.otherquant-ph

Measuring the quantum state of a nanomechanical oscillator

We propose a scheme to measure the quantum state of a nanomechanical oscillator cooled near its ground state of vibrational motion. This is an extension of the nonlinear atomic homodyning technique scheme first developed to measure the intracavity field in a micromaser. It involves the use of a detector-atom that is simultaneously coupled to the cantilever via a magnetic interaction and to (classical) optical fields via a Raman transition. We show that the probability for the atom to be found in the excited state is a direct measure of the Wigner characteristic function of the nanomechanical o…

2009-08-10quant-ph

Near-field integration of a SiN nanobeam and a SiO$_2$ microcavity for Heisenberg-limited displacement sensing

Placing a nanomechanical object in the evanescent near-field of a high-$Q$ optical microcavity gives access to strong gradient forces and quantum-noise-limited displacement readout, offering an attractive platform for precision sensing technology and basic quantum optics research. Robustly implementing this platform is challenging, however, as it requires separating optically smooth surfaces by $\lesssimλ/10$. Here we describe a fully-integrated evanescent opto-nanomechanical transducer based on a high-stress Si$_3$N$_4$ nanobeam monolithically suspended above a SiO$_2$ microdisk cavity. Emplo…

2016-01-25cond-mat.mes-hallphysics.ins-detphysics.optics

Quantum Nondemolition Squeezing of a Nanomechanical Resonator

We show that the nanoresonator position can be squeezed significantly below the ground state level by measuring the nanoresonator with a quantum point contact or a single-electron transistor and applying a periodic voltage across the detector. The mechanism of squeezing is basically a generalization of quantum nondemolition measurement of an oscillator to the case of continuous measurement by a weakly coupled detector. The quantum feedback is necessary to prevent the ``heating'' due to measurement back-action. We also discuss a procedure of experimental verification of the squeezed state.

2004-06-18cond-mat.mes-hallquant-ph

Nanomechanical read-out of a single spin

The spin of a single electron in a suspended carbon nanotube can be read out by using its coupling to the nano-mechanical motion of the nanotube. To show this, we consider a single electron confined within a quantum dot formed by the suspended carbon nanotube. The spin- orbit interaction induces a coupling between the spin and one of the bending modes of the suspended part of the nanotube. We calculate the response of the system to pulsed external driving of the mechanical motion using a Jaynes-Cummings model. To account for resonator damping, we solve a quantum master equation, with parameter…

2012-12-07cond-mat.mes-hallquant-ph

更多相关论文收起更多论文

Probing the quantum behaviors of a nanomechanical resonator coupled to a double quantum dot

We propose a current correlation spectrum approach to probe the quantum behaviors of a nanome-chanical resonator (NAMR). The NAMR is coupled to a double quantum dot (DQD), which acts as a quantum transducer and is further coupled to a quantum-point contact (QPC). By measuring the current correlation spectrum of the QPC, shifts in the DQD energy levels, which depend on the phonon occupation in the NAMR, are determined. Quantum behaviors of the NAMR could, thus, be observed. In particular, the cooling of the NAMR into the quantum regime could be examined. In addition, the effects of the coupling…

2012-06-10cond-mat.mes-hallquant-ph

Measurement and control of a mechanical oscillator at its thermal decoherence rate

In real-time quantum feedback protocols, the record of a continuous measurement is used to stabilize a desired quantum state. Recent years have seen highly successful applications in a variety of well-isolated micro-systems, including microwave photons and superconducting qubits. By contrast, the ability to stabilize the quantum state of a tangibly massive object, such as a nanomechanical oscillator, remains a difficult challenge: The main obstacle is environmental decoherence, which places stringent requirements on the timescale in which the state must be measured. Here we describe a position…

2014-12-12quant-ph

Optically Measuring Force near the Standard Quantum Limit

The Heisenberg uncertainty principle sets a lower bound on the sensitivity of continuous optical measurements of force. This bound, the standard quantum limit, can only be reached when a mechanical oscillator subjected to the force is unperturbed by its environment, and when measurement imprecision from photon shot-noise is balanced against disturbance from measurement backaction. We apply an external force to the center-of-mass motion of an ultracold atom cloud in a high-finesse optical cavity. The optomechanically transduced response clearly demonstrates the trade-off between measurement imp…

2013-12-17physics.atom-phquant-ph

Displacemon electromechanics: how to detect quantum interference in a nanomechanical resonator

We introduce the `displacemon' electromechanical architecture that comprises a vibrating nanobeam, e.g. a carbon nanotube, flux coupled to a superconducting qubit. This platform can achieve strong and even ultrastrong coupling enabling a variety of quantum protocols. We use this system to describe a protocol for generating and measuring quantum interference between two trajectories of a nanomechanical resonator. The scheme uses a sequence of qubit manipulations and measurements to cool the resonator, apply an effective diffraction grating, and measure the resulting interference pattern. We sim…

2017-10-05quant-ph

Ultrawide-range photon number calibration using a hybrid system combining nano-electromechanics and superconducting circuit quantum electrodynamics

We present a hybrid system consisting of a superconducting coplanar waveguide resonator coupled to a nanomechanical string and a transmon qubit acting as nonlinear circuit element. We perform spectroscopy for both the transmon qubit and the nanomechanical string. Measuring the ac-Stark shift on the transmon qubit as well as the electromechanically induced absorption on the string allows us to determine the average photon number in the microwave resonator in both the low and high power regimes. In this way, we measure photon numbers that are up to nine orders of magnitude apart. We find a quant…

2018-08-16cond-mat.mes-hallquant-ph

A Nanoscale Experiment Measuring Gravity's Role in Breaking the Unitarity of Quantum Dynamics

Modern, state of the art nanomechanical devices are capable of creating spatial superpositions that are massive enough to begin to experimentally access the quantum to classical crossover, and thus force us to consider the possible ways in which the usual quantum dynamics may be affected. One recent theoretical proposal describes the crossover from unitary quantum mechanics to classical dynamics as a form of spontaneous symmetry breaking. Here, we propose a specific experimental setup capable of identifying the source of unitarity breaking in such a mechanism. The experiment is aimed specifica…

2011-08-11cond-mat.mes-hallcond-mat.str-elquant-ph

Continuous Force and Displacement Measurement Below the Standard Quantum Limit

Quantum mechanics dictates that the precision of physical measurements must be subject to certain constraints. In the case of inteferometric displacement measurements, these restrictions impose a 'standard quantum limit' (SQL), which optimally balances the precision of a measurement with its unwanted backaction. To go beyond this limit, one must devise more sophisticated measurement techniques, which either 'evade' the backaction of the measurement, or achieve clever cancellation of the unwanted noise at the detector. In the half-century since the SQL was established, systems ranging from LIGO…

2018-09-27quant-ph

Laser cooling a membrane-in-the-middle system close to the quantum ground state from room temperature

Many protocols in quantum science and technology require initializing a system in a pure quantum state. In the context of the motional state of massive resonators, this enables studying fundamental physics at the elusive quantum-classical transition, and measuring force and acceleration with enhanced sensitivity. Laser cooling has been a method of choice to prepare mechanical resonators in the quantum ground state, one of the simplest pure states. However, in order to overcome the heating and decoherence by the thermal bath, this usually has to be combined with cryogenic cooling. Here, we lase…

2023-01-30physics.opticsquant-ph