arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 0910.4669cond-mat.mtrl-sci
收藏

铝-钢机械粉末直流等离子喷涂

Direct current plasma spraying of mechanofused alumina-steel particles

Mohamed Bouneder, Hélène Ageorges, Mohamed Elganaoui, Bernard Pateyron, Pierre Fauchais

摘要:

用Ar-H2(53-7 slm)直流等离子体射流(I = 500 A,P = 28 kW,ρ_th = 56%)喷涂包覆有氧化铝壳(2 $μ$ m厚,通过机械熔合制造)的不锈钢颗粒(平均直径为60 $μ$ m)。在飞行中收集两种主要类型的颗粒,接近喷嘴出口下游50 mm处:具有钢芯的颗粒,其表面不均匀分布有氧化铝片,以及由具有氧化铝帽的球形不锈钢颗粒组成的颗粒。等离子体流场采用二维定常抛物模型,单粒子运动轨迹采用三维Boussinesq-Oseen-Basset方程。在双层不锈钢包覆氧化铝颗粒的传热中,考虑了包括相变在内的热传播现象。该模型允许确定的位置,沿颗粒轨迹,在那里的对流运动可能发生,以及夹带的液体氧化物的飞行中的颗粒的前缘。传热计算表明,氧化铝和钢之间的接触热阻TCR的重要性。

英文摘要:

Stainless steel particles (60 $μ$m in mean diameter) cladded with an alumina shell (2 $μ$m thick and manufactured by mechanofusion) were sprayed with an Ar-H2 (53-7 slm) d.c. plasma jet (I = 500 A, P = 28 kW, ρ_th = 56 %). Two main types of particles were collected in flight, as close as 50 mm downstream of the nozzle exit: particles with a steel core with pieces of alumina unevenly distributed at their surface and those consisting of a spherical stainless steel particle with an alumina cap. The plasma flow was modeled by a 2D steady parabolic model and a single particle trajectory by using the 3D Boussinesq-Oseen-Basset equation. The heat transfer, within the two-layer, stainless steel cladded by alumina, particle, considered the heat propagation phenomena including phase changes. The models allowed determining the positions, along the particle trajectory, where the convective movement could occur as well as the entrainment of the liquid oxide to the leading edge of the in-flight particles. The heat transfer calculations showed the importance of the thermal contact resistance TCR between alumina and steel.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑