arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 0910.2946astro-ph.IM
收藏

RRI 10.4 m望远镜的12 GHz射电全息表面测量

12 GHz Radio-Holographic surface measurement of the RRI 10.4 m telescope

Ramesh Balasubramanyam, Suresh Venkatesh, Sharath B. Raju

摘要:

拉曼研究所的10.4米毫米波望远镜正在安装一个现代化的Q波段低噪声放大器前端,以支持40-50千兆赫频率范围内的观测。为了评估表面的适用性,我们使用无线电全息术测量了主表面与理想抛物面的偏差。我们使用来自GSAT 3卫星的11.6996 GHz信标信号,1.2 m参考天线,商业Ku波段低噪声块转换器(LNBC)作为接收机前端,斯坦福研究系统(SRS)锁定放大器作为后端。LNBCs具有独立的自由运行的第一本地振荡器(LO)。然而,我们通过使用辐射注入的公共音调作为第二本地振荡器来恢复相关性。通过这种设置,我们将表面偏差映射到64 x 64网格上,并测量了~350 um的rms表面偏差,测量精度为~50 um。

英文摘要:

A modern Q-band low noise amplifier (LNA) front-end is being fitted to the 10.4 m millimeter-wave telescope at the Raman Research Institute (RRI) to support observations in the 40-50 GHz frequency range. To assess the suitability of the surface for this purpose, we measured the deviations of the primary surface from an ideal paraboloid using radio holography. We used the 11.6996 GHz beacon signal from the GSAT3 satellite, a 1.2 m reference antenna, commercial Ku-band Low Noise Block Convereters (LNBC) as the receiver front-ends and a Stanford Research Systems (SRS) lock-in amplifier as the backend. The LNBCs had independent free-running first local oscillators (LO). Yet, we recovered the correlation by using a radiatively injected common tone that served as the second local oscillator. With this setup, we mapped the surface deviations on a 64 x 64 grid and measured an rms surface deviation of ~350 um with a measurement accuracy of ~50 um.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑