arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 0910.1137astro-ph.IM
收藏

利用矾山Tinsley反射器进行红外视差计划的可行性

Feasibility of an Infrared Parallax Program Using the Fan Mountain Tinsley Reflector

Jennifer Lynn Bartlett, Chan Park, Srikrishna Kanneganti, Philip A. Ianna

摘要:

尽管地面视差测量的重要性仍然存在,但很少有活跃的项目仍然存在。由于太阳邻域的新成员倾向于较晚的光谱类型,因此红外视差计划特别可取。因此,由弗吉尼亚天文仪器实验室(VAIL)为范山天文台的31英寸(0.8米)Tinsley反射器开发的新红外相机FanCam的天体测量质量在2005年期间使用68个J波段曝光的疏散星团NGC 2420在一个小时角度范围内进行了评估。测量了16颗天体测量评估星的位置,并使用单次观测单位重量的平均误差来评估这些位置的重复性。总体而言,x(RA)的精度为1.3 +/- 0.7微米,y(Dec)的精度为1.3 +/- 0.8微米,相当于每个轴的精度为0.04”+/- 0.02”。虽然CCD在可见光和近红外方面的精度更高,但该仪器可以达到与ESO NTT红外视差程序类似的精度。因此,使用该设备在红外线中测量散射是可行的。如果启动,这样一个计划可以为褐矮星和非常低质量的恒星提供必要的距离,这将对太阳邻居普查做出重大贡献。

英文摘要:

Despite the continuing importance of ground-based parallax measurements, few active programs remain. Because new members of the solar neighborhood tend towards later spectral types, infrared parallax programs are particularly desirable. Consequently, the astrometric quality of the new infrared camera, FanCam, developed by the Virginia Astronomical Instrumentation Laboratory (VAIL) for the 31-in (0.8-m) Tinsley reflector at Fan Mountain Observatory was assessed using 68 J-band exposures of an open cluster, NGC 2420, over a range of hour angles during 2005. Positions of 16 astrometric evaluation stars were measured and the repeatability of those positions was evaluated using the mean error in a single observation of unit weight. Overall, a precision of 1.3 +/- 0.7 microns in x (RA) and 1.3 +/- 0.8 microns in y (Dec) was attained, which corresponds to 0.04" +/- 0.02" in each axis. Although greater precision is expected from CCDs in the visual and near-infrared, this instrument can achieve precision similar to that of the ESO NTT infrared parallax program. Therefore, measuring parallaxes in the infrared would be feasible using this equipment. If initiated, such a program could provide essential distances for brown dwarfs and very low mass stars that would contribute significantly to the solar neighborhood census.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑