A magnetic tunnel junction sensor is proposed, with both the detection and the reference layers pinned by IrMn. Using the differences in the blocking temperatures of the IrMn films with different thicknesses, crossed anisotropies can be induced between the detection and the reference electrodes. The pinning of the sensing electrode ensures a linear and reversible output. It also allows tuning both the sensitivity and the linear range of the sensor. The authors show that the sensitivity varies linearly with the ferromagnetic thickness of the detection electrode. It is demonstrated that an increased thickness leads to a rise of sensitivity and a reduction of the operating range.
Dependence of tunnel magnetoresistance on ferromagnetic electrode materials in MgO-barrier magnetic tunnel junctions
研究了MgO势垒磁性隧道结(MTJ)中隧道磁电阻(TMR)比与电极结构的关系。具有Co 40 Fe 40 B20参考层和自由层的MTJ中的TMR比率在Ta=400摄氏度的沉积后退火温度下达到355%。当Co 50 Fe 50或Co 90 Fe 10用于参考层材料时,没有观察到高TMR比。具有高TMR比的关键是具有高度取向的(001)MgO阻挡层/CoFeB晶体电极。到目前为止,在伪自旋阀MTJ中,在Ta = 450 ℃时获得的最高TMR比为450%。
First-principles study of Co concentration and interfacial resonance states in Fe$_{1-x}$Co$_x$ magnetic tunnel junctions
Fe $_{1-x}$ Co $_{x}$/MgO磁性隧道结(MTJ)中使隧道磁电阻(TMR)最大化的最佳Co浓度仍在研究中。我们进行了第一性原理传输研究MTJ使用无序电极建模使用虚晶近似(VCA)和有序合金与各种MgO势垒厚度。我们发现,10 - 20 $%$ Co浓度最大化TMR使用VCA来表示电极中的无序。该TMR峰是由于少数d型界面共振态(IRS)而出现的,其被小Co掺杂填充,从而导致反平行电导的降低。用有序Fe $_{1-x}$ Co $_{x}$电极的计算证实了对于小Co浓度的这种少数d型IRS的填充。此外,我们构建了一个10 × 10的超原胞没有VCA明确表示在Fe $_{1-x}$ Co $_x$/MgO界面的无序,这表明了淬火的少数d IRS和在费米能级,同意VCA计算的可用状态显着减少。这些结果解释了最近的实验结果,并提供了影响的IRS的电导和TMR在Fe $_{1-x}$ Co $_x$/MgO隧道结的影响。
Theory of tunnel magnetoresistance in magnetic tunnel junctions with hexagonal boron nitride barriers: mechanism and application to ferromagnetic alloy electrodes
National Institute for Materials Science (NIMS)(物质材料研究机构);Kyoto Institute of Technology(京都工艺纤维大学)