The properties of bulk nanostructured materials are often controlled by atomic scale features like segregation along defects or composition gradients. Here we discuss about the complimentary use of TEM and APT to obtain a full description of nanostructures. The advantages and limitations of both techniques are highlighted on the basis of experimental data collected in severely deformed steels with a special emphasis on carbon spatial distribution.
Methane (CH_4) gas sensing properties of novel vanadium dioxide (VO_2) nanostructured films is reported for the first time. The single phase nanostructures are synthesized by pulsed dc-magnetron sputtering of V target followed by oxidation in O_2 atmosphere at 550 ^oC. The partial pressure of O_2 is controlled to obtain stoichiometric VO_2 with the samples showing rutile monoclinic crystalline symmetry and regions of rod shaped nano-architectures. These nanostructured films exhibit a reversible semiconductor to metal transition in the temperature range of 60-70 ^oC. Gas sensing experiments are…
The theoretical description of the nanostructured Pb(Fe1/2Ta1/2)x(Zr1/2Ti1/2)1-xO3 (PFTx-PZT(1-x)) and Pb(Fe1/2Nb1/2)x(Zr1/2Ti1/2)1-xO3 (PFNx-PZT(1-x)) intriguing ferromagnetic, ferroelectric and magnetoelectric properties at temperatures higher than 100 K are absent to date. The goal of this work is to propose the theoretical description of the physical nature and the mechanisms of the aforementioned properties, including room temperature ferromagnetism, phase diagram dependence on the composition x with a special attention to the multiferroic properties at room temperature, including anomalo…
Porous metal oxides with nano-sized features attracted intensive interest in recent decades due to their high surface area which is essential for many applications, e.g. Li ion batteries, photocatalysts, fuel cells and dye-sensitized solar cells. Various approaches were so far investigated to synthesize porous nanostructured metal oxides, including self-assembly and template-assisted synthesis. For the latter approach, forests of carbon nanotubes are considered as particularly promising templates, with respect to their one dimensional nature and the resulting high surface area. In this work, w…
Nanostructured Zinc oxide (ZnO) was synthesized via a ball milling for 10 hours using high energy planetary ball mill. Phase purity and homogeneity of all the samples have been investigated by X-ray diffraction (XRD) and Field Emission Scanning Electron Microscopy (FE-SEM). All the diffraction peaks can be indexed to the hexagonal phase ZnO with hexagonal symmetry (space group P63mc). Average crystallite size was observed to be 20 nm. There was a remarkable suppression in thermal conductivity (κ) compared to the bulk values by a factor of ~50 at room temperature. This suggests to the possibili…
Present paper reports the effect of ZnO additives on humidity and temperature sensing properties of cuprous oxide. The cuprous oxide powder was mixed with 10% and 25% ZnO by weight and these samples were pelletized by using hydraulic pressing machine. The sensing materials were also investigated by Scanning Electron Microscope (SEM) and X-ray Diffraction (XRD). SEM images show morphology and porosity of material. The average particles size of cuprous oxide was found to be 1.2 micron. The sheet like structures of ZnO is evident in micrographs. From XRD all peaks are well identified and crystall…
Nanostructured La0.67Ca0.33MnO3 (NS-LCMO) was formed by pulsed-laser deposition on the surface of porous Al2O3. The resistance peak temperature (Tp) of the NS-LCMO increases with increasing average thickness of the films, while their Curie temperatures (Tc) remain unchanged. The coercive field of the samples increases with decreasing film thickness and its temperature dependence can be well described by Hc(T) = Hc(0)[1-(T/TB)1/2]. A large magnetoresistance and strong memory effect were observed for the NS-LCMO. The results are discussed in terms of the size effect, Coulomb blockade and magneti…
Sb-doped Bi2Te3 is known since the 1950s as the best thermoelectric material for near-room temperature operation. Improvements in material performance are expected from nanostructuring procedures. We present a straightforward and fast method to synthesize already nanostructured pellets that show an enhanced ZT due to a remarkably low thermal conductivity and unusually high Seebeck coefficient for a nominal composition optimized for arc-melting: Bi0.35Sb1.65Te3. We provide a detailed structural analysis of the Bi2-xSbxTe3 series based on neutron powder diffraction as a function of composition a…
Half-Heusler (HH) alloys have attracted considerable interest as promising thermoelectric (TE) materials in the temperature range around 700 K and above, which is close to the temperature range of most industrial waste heat sources. The past few years have seen nanostructuing play an important role in significantly enhancing the TE performance of several HH alloys. In this article, we briefly review the recent progress and advances in these HH nanocomposites. We begin by presenting the structure of HH alloys and the different strategies that have been utilized for improving the TE properties o…
The structure-property relation of nanostructured Al-doped ZnO thin films has been investigated in detail through a systematic variation of structure and morphology, with particular emphasis on how they affect optical and electrical properties. A variety of structures, ranging from compact polycristalline films to mesoporous, hierarchically organized cluster assemblies, are grown by Pulsed Laser Deposition at room temperature at different oxygen pressures. We investigate the dependence of functional properties on structure and morphology and show how the correlation between electrical and opti…
Temperature Dependent Magnetic and Structural Properties of Al Substituted Nanostructured Ferrites with Large Coercive Fields
University of Genoa（热那亚大学）；Uppsala University（乌普萨拉大学）；Lomonosov Moscow State University（莫斯科罗蒙诺索夫国立大学）；Le Mans Université（勒芒大学）；Nuclear Physics Institute of the CAS（捷克科学院核物理研究所）；CNR-SPIN（国家研究中心自旋物理研究所）；Università Ca’ Foscari Venezia（威尼斯卡福斯卡里大学）
An application of the radiolysis method using X-ray synchrotron beam is developed as a novel approach to the synthesis of metal-organic films with controlled shapes and thickness. We demonstrate that a Langmuir monolayer deposited onto a silver ion-containing subphase, irradiated by an incident beam impinging below the critical angle for total reflection, induces the synthesis of a stable nanostructured silver-organic ultrathin film at the air-water interface. The X-ray scattering is also used to monitor in situ the structure of the silver layer during the synthesis process. The layer is obser…
Nanocrystalline ribbons of inverse Heusler alloy Mn2Ni1.6Sn0.4 have been synthesised by melt spinning of the arc melted bulk precursor. The single phase ribbons crystallize into a cubic structure and exhibit very fine crystallite size of < 2 nm. Temperature dependent magnetization (M-T) measurements reveal that austenite (A)-martensite (M) phase transition begins at T~248 K and finishes at T~238 K during cooling cycle and these values increase to T~267 K and T~259 K while warming. In cooling cycle, the A-phase shows ferromagnetic (FM) ordering with a Curie temperature T~267 K, while both the F…
The processing of binary alloys consisting of ferromagnetic Fe and antiferromagnetic Cr by severe plastic deformation (SPD) with different chemical compositions has been investigated. Although the phase diagram exhibits a large gap in the thermodynamical equilibrium at lower temperatures, it is shown that techniques based on SPD help to overcome common processing limits. Different processing routes including initial ball milling (BM) and arc melting (AM) and a concatenation with annealing treatments prior to high-pressure torsion (HPT) deformation are compared in this work. Investigation of th…
Energy filtering has been suggested by many authors as a means to improve thermoelectric properties. The idea is to filter away low-energy charge carriers in order to increase Seebeck coefficient without compromising electronic conductivity. This concept was investigated in the present paper for a specific material (ZnSb) by a combination of first-principles atomic-scale calculations, Boltzmann transport theory, and experimental studies of the same system. The potential of filtering in this material was first quantified, and it was as an example found that the power factor could be enhanced by…
Self-assembly via nanoscale phase-separation offers an elegant route to fabricate nanocomposites with physical properties unattainable in single-component systems. One important class of nanocomposites are optical metamaterials which exhibit exotic properties and lead to opportunities for agile control of light propagation. Such metamaterials are typically fabricated via expensive and hard-to-scale top-down processes requiring precise integration of dissimilar materials. In turn, there is a need for alternative, more efficient routes to fabricate large-scale metamaterials for practical applica…
Hot wall technique was used to grow block single crystal films of Bi_2Te_3 and solid solutions of Bi_(0.5)Sb_(1.5)Te_3 on mica (muscovite) substrates. X-ray diffraction studies demonstrated that the crystalline c-axis in the films was normal to the substrate plane. Seebeck coefficient, electrical conductivity and magnetoresistivity tensor components were measured at various orientations of magnetic and electric fields in the temperature interval 77-300 K and magnetic field up to 14 T. Scattering mechanism of charge carriers in the films were studied using temperature dependences of the degener…
Polycrystalline LiMnBO3 is a promising cathode material for Li-ion batteries. In this work, we investigated the thermal, structural and electrical properties of glassy and nanocrystallized materials having the same chemical composition. The original glass was obtained via a standard meltquenching method. SEM and 7Li solid-state NMR indicate that it contains a mixture of two distinct glassy phases. The results suggest that the electrical conductivity of the glass is dominated by the ionic one. The dc conductivity of initial glass was estimated to be in the order of 10-18 S.cm-1 at room temperat…
Metal hydrides (MH) are often preferred to absorb and desorb hydrogen at ambient temperature and pressure with a high volumetric density. These hydrogen storage alloys create promising prospects for hydrogen storage and can solve the energetic and environmental issues. In the present research work, the goal of our studies is to find the influence of partial substitution of small amounts of vanadium and tantalum on the hydrogenation properties of TiFe0.7-xMn0.3Vx (x=0.05, and 0.1) and Ti1-yTayFe0.7Mn0.3 (y=0.2, and 0.4) alloys, respectively. The nominal compositions of these materials are TiFe0…
Nanostructured Pd-Fe thin films with varied Fe content were prepared by electrodeposition technique from organic electrolytes on Cu and brass substrates. The structure and the magnetic properties of the films were investigated prior to post-deposition annealing. The structure of the Pd1-xFex thin films with x = 0.14, 0.24, and 0.52 was determined by X-ray diffraction (XRD) and transmission electron microscopy (TEM) as a solid solution of iron in palladium face-centered cubic lattice with the (111) orientation of nanograins relatively to the substrate surface. The films with higher iron concent…
Recent years witnessed a rapid growth of interest of scientific and engineering communities to thermal properties of materials. Carbon allotropes and derivatives occupy a unique place in terms of their ability to conduct heat. The room-temperature thermal conductivity of carbon materials span an extraordinary large range - of over five orders of magnitude - from the lowest in amorphous carbons to the highest in graphene and carbon nanotubes. I review thermal and thermoelectric properties of carbon materials focusing on recent results for graphene, carbon nanotubes and nanostructured carbon mat…
A numerical study of thermoelectric nanocomposites is presented. Thermoelectric properties as a function of average grain size or nanoparticle density are examined by simulating the measurements as they would be done experimentally. In accordance with previous theory and experimental results, we find that the Seebeck coefficient, power factor and figure of merit, zT, can be increased by nanostructuring when energy barriers exist around the grain boundaries or embedded nanoparticles. When we simulate the performance of a thermoelectric cooler with the same material, however, we find that the ma…
The field of thermoelectric materials has undergone a revolutionary transformation over the last couple of decades as a result of the ability to nanostructure and synthesize myriads of materials and their alloys. The ZT figure of merit, which quantifies the performance of a thermoelectric material has more than doubled after decades of inactivity, reaching values larger than two, consistently across materials and temperatures. Central to this ZT improvement is the drastic reduction in the material thermal conductivity due to the scattering of phonons on the numerous interfaces, boundaries, dis…
Nanostructured materials exhibit low thermal conductivity because of the additional scattering due to phonon-boundary interactions. As these interactions are highly sensitive to the mean free path (MFP) of a given phonon mode, MFP distributions in nanostructures can be dramatically distorted relative to bulk. Here we calculate the MFP distribution in periodic nanoporous Si for different temperatures, using the recently developed MFP-dependent Boltzmann Transport Equation. After analyzing the relative contribution of each phonon branch to thermal transport in nanoporous Si, we find that at room…
A FePd alloy was nanostructured by severe plastic deformation following two different routes: ordered and disordered states were processed by high pressure torsion (HPT). A grain size in a range of 50 to 150 nm is obtained in both cases. Severe plastic deformation induces some significant disordering of the long range ordered L10 phase. However, Transmission Electron Microscopy (TEM) data clearly show that few ordered nanocrystals remain in the deformed state. The deformed materials were annealed to achieve nanostructured long range ordered alloys. The transformation proceeds via a first order…
The magnetocaloric effect (MCE) is the key concept to produce new, advanced, freon-like free, low cost and environmental friendly magnetic refrigerators. Among several potential materials, $Sm_{0.6}Sr_{0.4}MnO_3$ manganite presents one of the highest MCE value in comparison to all other known manganites; however, its studied was only concentrated on the bulk material. To overcame this lack of the information we successfully produced advanced nanostructures, namely nanoparticles and nanotubes of that highlighted manganite by using a sol-gel modified method. High resolution transmission electron…
We present the full thermoelectric characterization of nanostructured bulk PbTe and PbTe-PbSe samples fabricated from colloidal core-shell nanoparticles followed by spark plasma sintering. An unusually large thermopower is found in both materials, and the possibility of energy filtering as opposed to grain boundary scattering as an explanation is discussed. A decreased Debye temperature and an increased molar specific heat are in accordance with recent predictions for nanostructured materials. On the basis of these results we propose suitable core-shell material combinations for future thermoe…
Nanostructured titania derived from the sol-gel processing requires a detailed study to clarify state-of-art of every process step starting from colloidal sol, peptization, gelation to the final sintering. The applied parameters such as peptization temperature and time in the current investigation of sol during the early stage of processing were characterized by dynamic light scattering (DLS) and compared to other parameters found in the literature. Upon gelation, the resulting anatase was calcined to study the phase transformation to rutile as well as to discriminate the effect of peptized an…
Nano-structured molybdenum-copper composites have been produced through severe plastic deformation of liquid-metal infiltrated Cu30Mo70 and Cu50Mo50 (wt.%) starting materials. Processing was carried out using high pressure torsion at room temperature with no subsequent sintering treatment, producing a porosity-free, ultrafine grained composite. Extensive deformation of the Cu50Mo50 composite via two-step high-pressure torsion produced equiaxed nanoscale grains of Mo and Cu with a grain size of 10-15 nm. Identical treatment of Cu30Mo70 produced a ultrafine, lamellar structure, comprised of Cu a…
Recently, new quantum features have been studied in the area of ridged quantum wells (RQW). Periodic ridges on the surface of the quantum well layer impose additional boundary conditions on the electron wave function and reduce the quantum state density. Electrons, rejected from forbidden quantum states, have to occupy the states with higher energy. As a result, Fermi energy in RQW increases and work function (WF) decreases. We investigate low WF electrode, com-posed from a metal RQW layer and a base substrate. The substrate material was selected so that electrons were confined to the RQW. The…
Nanostructured permanent magnets are gaining increasing interest and importance for applications such as generators and motors. Thermal management is a key concern since performance of permanent magnets decreases with temperature. We investigated the magnetic and thermal transport properties of rare-earth free nanostructured SrFe12O19 magnets produced by the current activated pressure assisted densification. The synthesized magnets have aligned grains such that their magnetic easy axis is perpendicular to their largest surface area to maximize their magnetic performance. The SrFe12O19 magnets …
Grain boundaries (GBs) are planar lattice defects that govern the properties of many types of polycrystalline materials. Hence, their structures have been investigated in great detail. However, much less is known about their chemical features, owing to the experimental difficulties to probe these features at the atomic length scale inside bulk material specimens. Atom probe tomography (APT) is a tool capable of accomplishing this task, with an ability to quantify chemical characteristics at near-atomic scale. Using APT data sets, we present here a machine-learning-based approach for the automa…
Great emphasis is placed on the development of integrated approaches for the synthesis and the characterization of ad hoc nanostructured platforms, to be used as templates with controlled morphology and chemical properties for the investigation of specific phenomena of great relevance for technological applications in interdisciplinary fields such as biotechnology, medicine and advanced materials. Here we discuss the crucial role and the advantages of thin film deposition strategies based on cluster-assembling from supersonic cluster beams. We select cluster-assembled nanostructured titania (n…
A novel W-based refractory high entropy alloy with outstanding radiation resistance has been developed. The alloy was grown as thin films showing a bimodal grain size distribution in the nanocrystalline and ultrafine regimes and a unique 4 nm lamella-like structure revealed by atom probe tomography (APT). Transmission electron microscopy (TEM) and X-ray diffraction show an underlying body-centered cubic crystalline structure with certain black spots appearing after thermal annealing at elevated temperatures. Thorough analysis based on TEM and APT correlated the black spots with second phase pa…
