抛物面碟形泡沫膜太阳能聚光器
Parabolic-Dish Solar Concentrators of Film on Foam
摘要:
抛物面镜和球面镜由聚氨酯泡沫塑料上的镀铝PET聚酯薄膜制成。在构造过程中,通过利用空气压力操纵膜的弹性/塑性行为来创建所选择的反射镜形状。然后将泡沫施加到膜上,一旦硬化,就去除空气压力。在f数为0.68时,初步模型具有小于0.25度的光学角展度,比完美的球面镜小3.3倍。有可能创造出具有良好形状和刚度的大型轻质镜子。这些“泡沫上的膜”构造技术也可应用于抛物槽太阳能集中器,但由于膜中的不规则性而似乎不适合于光学成像应用。
英文摘要:
Parabolic and spherical mirrors are constructed of aluminized PET polyester film on urethane foam. During construction, the chosen shape of the mirror is created by manipulating the elastic/plastic behavior of the film with air pressure. Foam is then applied to the film and, once hardened, air pressure is removed. At an f-number of 0.68, preliminary models have an optical angular spread of less than 0.25 degrees, a factor of 3.3 smaller than that for a perfectly spherical mirror. The possibility exists for creating large-lightweight mirrors with excellent shape and stiffness. These "film-on-foam" construction techniques may also be applicable to parabolic-trough solar concentrators but do not appear to be suitable for optical imaging applications because of irregularities in the film.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。