Multi-instrument observations of NOAA AR10938 on Jan. 14-18, 2007, are utilized to study the evolution of a magnetic thread system with multiple crossings suggestive of a twisted coronal flux rope. A C-class flare recorded by GOES on Jan. 16, at approximately 2:35 UT led to the brightening of the structure, that is seen in Hinode/EIS data at 2:46 UT, Hinode/XRT after 2:50 UT, and {\emph{STEREO}}/SECCHI/EUVI images at 3:30 UT. 304 Å images revealed the presence of rapidly evolving, dark fibrils along the bright structure before and after the flare. A denser structure formed a few hours later and lasted for several days forming a segment of an inverse S-shaped filament. The present set of data is highly suggestive of the presence of a twisted flux rope prior to the formation of the filament segment at the same location.
Using three-dimensional magnetohydrodynamic (MHD) simulations, we investigate the eruption of coronal flux ropes underlying coronal streamers and the development of a prominence eruption. We initialize a quasi-steady solution of a coronal helmet streamer, into which we impose at the lower boundary the slow emergence of a part of a twisted magnetic torus. As a result a quasi-equilibrium flux rope is built up under the streamer. With varying sizes of the streamer and the different length and total twist of the emerged flux rope, we found different scenarios for the evolution from quasi-equilibri…
We present results from 3D magnetohydrodynamic (MHD) simulations of the emergence of a twisted convection zone flux tube into a pre-existing coronal dipole field. As in previous simulations, following the partial emergence of the sub-surface flux into the corona, a combination of vortical motions and internal magnetic reconnection forms a coronal flux rope. Then, in the simulations presented here, external reconnection between the emerging field and the pre-existing dipole coronal field allows further expansion of the coronal flux rope into the corona. After sufficient expansion, internal reco…
This Topical Issue of Solar Physics, devoted to the study of flux-rope structure in coronal mass ejections (CMEs), is based on two Coordinated Data Analysis Workshops (CDAWs) held in 2010 (20 - 23 September in Dan Diego, California, USA) and 2011 (September 5-9 in Alcala, Spain). The primary purpose of the CDAWs was to address the question: Do all CMEs have flux rope structure? There are 18 papers om this topical issue, including this preface.
We present results from 3D visco-resistive magnetohydrodynamic (MHD) simulations of the emergence of a convection zone magnetic flux tube into a solar atmosphere containing a pre-existing dipole coronal field, which is orientated to minimize reconnection with the emerging field. We observe that the emergence process is capable of producing a coronal flux rope by the transfer of twist from the convection zone as found in previous simulations. We find that this flux rope is stable, with no evidence of a fast rise, and that its ultimate height in the corona is determined by the strength of the pr…
Understanding the magnetic configuration of the source regions of coronal mass ejections (CMEs) is vital in order to determine the trigger and driver of these events. Observations of four CME productive active regions are presented here, which indicate that the pre-eruption magnetic configuration is that of a magnetic flux rope. The flux ropes are formed in the solar atmosphere by the process known as flux cancellation and are stable for several hours before the eruption. The observations also indicate that the magnetic structure that erupts is not the entire flux rope as initially formed, rai…
Large-scale solar eruptive activities have a close relationship with coronal magnetic flux ropes. Previous numerical studies have found that the equilibrium of a coronal flux rope system could be disrupted if the axial magnetic flux of the rope exceeds a critical value, so that the catastrophe occurs, initiating the flux rope to erupt. Further studies discovered that the catastrophe does not necessarily exist: the flux rope system with certain photospheric flux distributions could be non-catastrophic. It is noteworthy that most previous numerical studies are under the ideal magnetohydrodynamic…
Magnetic flux ropes are bundles of twisted magnetic field enveloping a central axis. They harbor free magnetic energy and can be progenitors of coronal mass ejections (CMEs), but identifying flux ropes on the Sun can be challenging. One of the key coronal observables that has been shown to indicate the presence of a flux rope is a peculiar bright coronal structure called a sigmoid. In this work, we show Hinode EUV Imaging Spectrometer (EIS) observations of sigmoidal active region 10977. We analyze the coronal plasma composition in the active region and its evolution as the sigmoid (flux rope) …
Using a 3D MHD simulation, we model the quasi-static evolution and the onset of eruption of a coronal flux rope. The simulation begins with a twisted flux rope emerging at the lower boundary and pushing into a pre-existing coronal potential arcade field. At a chosen time the emergence is stopped with the lower boundary taken to be rigid. Then the coronal flux rope settles into a quasi-static rise phase during which an underlying, central sigmoid-shaped current layer forms along the so called hyperbolic flux tube (HFT), a generalization of the X-line configuration. Reconnections in the dissipat…
The coronal magnetic field is the primary driver of solar dynamic events. Linear and circular polarization signals of certain infrared coronal emission lines contain information about the magnetic field, and to access this information, either a forward or an inversion method must be used. We study three coronal magnetic configurations that are applicable to polar-crown filament cavities by doing forward calculations to produce synthetic polarization data. We analyze these forward data to determine the distinguishing characteristics of each model. We conclude that it is possible to distinguish …
We performed magnetohydrodynamic simulation of a formation process of coronal mass ejections (CMEs), focusing on interaction (reconnection) between an ejecting flux rope and its ambient field. We examined three cases with different ambient fields: no ambient field, and cases with dipole field of two opposite directions which are parallel and anti-parallel to that of the flux rope surface. As a result, while the flux rope disappears in the anti-parallel case, in other cases the flux ropes can evolve to CMEs and show different amounts of rotation of the flux rope. The results imply that the inte…
In the solar corona, magnetic flux rope is believed to be a fundamental structure accounts for magnetic free energy storage and solar eruptions. Up to the present, the extrapolation of magnetic field from boundary data is the primary way to obtain fully three-dimensional magnetic information of the corona. As a result, the ability of reliable recovering coronal magnetic flux rope is important for coronal field extrapolation. In this paper, our coronal field extrapolation code (CESE-MHD-NLFFF, Jiang & Feng 2012) is examined with an analytical magnetic flux rope model proposed by Titov & Demouli…
Many prominences are supported by magnetic flux ropes. One important question is how we can determine whether the flux rope is weakly-twisted or strongly-twisted. In this paper, we attempted to check whether prominences supported by weakly-twisted and strongly-twisted flux ropes can manifest different features so that we might distinguish the two types of magnetic structures by their appearance. We performed pseudo three-dimensional simulations of two magnetic flux ropes with different twists. We found that the resulting two prominences differ in many aspects. The prominence supported by a wea…
We analyse the evolution of a sigmoidal (S shaped) active region toward eruption, which includes a coronal mass ejection (CME) but leaves part of the filament in place. The X-ray sigmoid is found to trace out three different magnetic topologies in succession: a highly sheared arcade of coronal loops in its long-lived phase, a bald-patch separatrix surface (BPSS) in the hours before the CME, and the first flare loops in its major transient intensity enhancement. The coronal evolution is driven by photospheric changes which involve the convergence and cancellation of flux elements under the sigm…
We have studied three Interplanetary Coronal Mass Ejections (ICMEs) having clear signatures of magnetic cloud (MC) arrival at 1 AU and their associated solar sources during 2011 to 2013. Comparing the axial magnetic field strength (B0) of the near-Sun coronal flux-ropes with that of the MC at 1 AU, we have found that the average inferred value of B0 at 1 AU assuming the self-similar expansion of the flux-rope is two times smaller than the value of B0 obtained from the results of MC fitting. Furthermore, by comparing the initial orientation of the flux-rope near the Sun and its final orientatio…
Solar flares and coronal mass ejections (CMEs) are the most powerful explosions in the Sun. They are major sources of potentially destructive space weather conditions. However, the possible causes of their initiation remain controversial. By using high resolution data observed by NST of BBSO, supplemented by Solar Dynamics Observatory (SDO) observations, we present unusual observations of a small-scale emerging flux rope near a large sunspot, whose eruption produced an M-class flare and a coronal mass ejection. The presence of the small-scale flux rope was indicated by static nonlinear force f…
From a magnetohydrodynamic (MHD) simulation of the eruption of a prominence hosting coronal flux rope, we carry out forward synthesis of the circular polarization signal (Stokes V signal) of the FeXIII emission line at 1074.7 nm produced by the MHD model as measured by the proposed COronal Solar Magnetism Observatory (COSMO) Large Coronagraph (LC) and infer the line-of-sight magnetic field BLOS above the limb. With an aperture of 150 cm, integration time of 12 min, and a resolution of 12 arcsec, the LC can measure a significant BLOS with sufficient signal to noise level, from the simulated flu…
We carry out a three-dimensional magneto-hydrodynamic (MHD) simulation to model the initiation of the coronal mass ejection (CME) on 13 December 2006 in the emerging δ-sunspot active region NOAA 10930. The setup of the simulation is similar to a previous simulation by Fan (2011), but with a significantly widened simulation domain to accommodate the wide CME. The simulation shows that the CME can result from the emergence of a east-west oriented twisted flux rope whose positive, following emerging pole corresponds to the observed positive rotating sunspot emerging against the southern edge of t…
We report the first results of a magnetohydrodynamic (MHD) simulation of the development of a homologous sequence of three coronal mass ejections (CMEs) and demonstrate their so-called cannibalistic behavior. These CMEs originate from the repeated formations and partial eruptions of kink unstable flux ropes as a result of continued emergence of a twisted flux rope across the lower boundary into a pre-existing coronal potential arcade field. The simulation shows that a CME erupting into the open magnetic field created by a preceding CME has a higher speed. The second of the three successive CME…
Formed through magnetic field shearing and reconnection in the solar corona, magnetic flux ropes are structures of twisted magnetic field, threaded along an axis. Their evolution and potential eruption are of great importance for space weather. Here we describe a new methodology for the automated detection of flux ropes in simulated magnetic fields, based on fieldline helicity. More robust than previous methods, it also allows the full volume extent of each flux rope structure to be determined. Our Flux Rope Detection and Organization (FRoDO) code is publicly available, and measures the magnet…
During eruptive solar flares and coronal mass ejections, a non-pot{\-}ential magnetic arcade with much excess magnetic energy goes unstable and reconnects. It produces a twisted erupting flux rope and leaves behind a sheared arcade of hot coronal loops. We suggest that: the twist of the erupting flux rope can be determined from conservation of magnetic flux and magnetic helicity and equipartition of magnetic helicity. It depends on the geometry of the initial pre-eruptive structure. Two cases are considered, in the first of which a flux rope is not present initially but is created during the e…
A magnetic flux rope structure is believed to exist in most coronal mass ejections (CMEs). However, it has been long debated whether the flux rope exists before eruption or is formed during eruption via magnetic reconnection. The controversy has been continuing because of our lack of routine measurements of the magnetic field in the pre-eruption structure, such as solar filaments. However, recently an indirect method was proposed to infer the magnetic field configuration based on the sign of helicity and the bearing direction of the filament barbs. In this paper, we apply this method to two er…
Flux rope formation through flux cancellation of sheared coronal arcades in a 3D convectively-driven MHD simulation
University of Oslo（奥斯陆大学）；Sorbonne Université, Observatoire de Paris-PSL, École Polytechnique, IP Paris, CNRS, Laboratoire de Physique des Plasmas（索邦大学，巴黎天文台-PSL，巴黎综合理工学院，IP巴黎，法国国家科学研究中心，等离子体物理实验室）
The structure of electric current and magnetic helicity in the solar corona is closely linked to solar activity over the 11-year cycle, yet is poorly understood. As an alternative to traditional current-free "potential field" extrapolations, we investigate a model for the global coronal magnetic field which is non-potential and time-dependent, following the build-up and transport of magnetic helicity due to flux emergence and large-scale photospheric motions. This helicity concentrates into twisted magnetic flux ropes, which may lose equilibrium and be ejected. Here, we consider how the magnet…
Coronal mass ejections (CMEs) and coronal jets are two types of common solar eruptive phenomena, which often independently happen at different spatial scales. In this work, we present a stereoscopic observation of a large-scale CME flux rope arising from an unwinding blowout jet in a multipolar complex magnetic system. Based on a multi-band observational analysis, we find that this whole event starts with a small filament whose eruption occurs at a coronal geyser site after a series of homologous jets. Aided by magnetic field extrapolations, it reveals that the coronal geyser site forms above …
We investigate equilibrium height of the flux rope, and its internal equilibrium in a realistic plasma environment by carrying out numerical simulations of the evolution of systems including a current-carrying flux rope. We find that the equilibrium height of the flux rope is approximately a power-law function of the relative strength of the background field. Our simulations indicate that the flux rope can escape more easily from a weaker background field. This further confirms the catastrophe in the magnetic configuration of interest can be triggered by decrease of strength of the background …
The signatures of energy release and energy transport for a kink-unstable coronal flux rope are investigated via forward modelling. Synthetic intensity and Doppler maps are generated from a 3D numerical simulation. The CHIANTI database is used to compute intensities for three Hinode/EIS emission lines that cover the thermal range of the loop. The intensities and Doppler velocities at simulation resolution are spatially degraded to the Hinode/EIS pixel size (1\arcsec), convolved using a Gaussian point-spread function (3\arcsec), and exposed for a characteristic time of 50 seconds. The synthetic…
Investigations of the dynamics of the hot coronal plasma are crucial for understanding various space weather phenomena and making in-depth analyzes of the global heating of the solar corona. We present here numerical simulations of observations of siphon flows along loops (simple semi-circular flux ropes) to demonstrate the capabilities of the Solar Line Emission Dopplerometer (SLED), a new instrument under construction for imaging spectroscopy. It is based on the Multi-channel Subtractive Double Pass (MSDP) technique, which combines the advantages of filters and slit spectrographs. SLED will …
Coronal cavities have previously been observed associated with long-lived quiescent filaments and are thought to correspond to the associated magnetic flux rope. Although the standard flare model predicts a coronal cavity corresponding to the erupting flux rope, these have only been observed using broadband imaging data, restricting analysis to the plane-of-sky. We present a unique set of spectroscopic observations of an active region filament seen erupting at the solar limb in the extreme ultraviolet (EUV). The cavity erupted and expanded rapidly, with the change in rise phase contemporaneous…
Context: Many previous studies have shown that the magnetic precursor of a coronal mass ejection (CME) takes the form of a magnetic flux rope, and a subset of them have become known as `hot flux ropes' due to their emission signatures in $\sim$10 MK plasma. Aims: We seek to identify the processes by which these hot flux ropes form, with a view of developing our understanding of CMEs and thereby improving space weather forecasts. Methods: Extreme-ultraviolet observations were used to identify five pre-eruptive hot flux ropes in the solar corona and study how they evolved. Confined flares were o…
We present a 3D simulation of the dynamic emergence of a twisted magnetic flux tube from the top layer of the solar convection zone into the solar atmosphere and corona. It is found that after a brief initial stage of flux emergence during which the two polarities of the bipolar region become separated and the tubes intersecting the photosphere become vertical, significant rotational motion sets in within each polarity. The rotational motions of the two polarities are found to twist up the inner field lines of the emerged fields such that they change their orientation into an inverse configura…
We present evidence that a magnetic flux rope was formed before a coronal mass ejection (CME) and its associated long-duration flare during a pair of preceding confined eruptions and associated impulsive flares in a compound event in NOAA Active Region 12371. Extreme-ultraviolet images and the extrapolated nonlinear force-free field show that the first two, impulsive flares, SOL2015-06-21T01:42, result from the confined eruption of highly sheared low-lying flux, presumably a seed flux rope. The eruption spawns a vertical current sheet, where magnetic reconnection creates flare ribbons and loop…
Coronal mass ejections (CMEs) are one of the primary manifestations of solar activity and can drive severe space weather effects. Therefore, it is vital to work towards being able to predict their occurrence. However, many aspects of CME formation and eruption remain unclear, including whether magnetic flux ropes are present before the onset of eruption and the key mechanisms that cause CMEs to occur. In this work, the pre-eruptive coronal configuration of an active region that produced an interplanetary CME with a clear magnetic flux rope structure at 1 AU is studied. A forward-S sigmoid appe…
We compare the magnetic helicity in the 17-18 March 2013 interplanetary coronal mass ejection (ICME) flux-rope at 1 AU and in its solar counterpart. The progenitor coronal mass ejection (CME) erupted on 15 March 2013 from NOAA active region 11692 and associated with an M1.1 flare. We derive the source region reconnection flux using post-eruption arcade (PEA) method (Gopalswamy et al. 2017a) that uses the photospheric magnetogram and the area under the PEA. The geometrical properties of the near-Sun flux rope is obtained by forward-modeling of white-light CME observations. Combining the geometr…
The most probable initial magnetic configuration of a CME is a flux rope consisting of twisted field lines which fill the whole volume of a dark coronal cavity. The flux ropes can be in stable equilibrium in the coronal magnetic field for weeks and even months, but suddenly they loose their stability and erupt with high speed. Their transition to the unstable phase depends on the parameters of the flux rope (i.e., total electric current, twist, mass loading etc.), as well as on the properties of the ambient coronal magnetic field. One of the major governing factors is the vertical gradient of …
Coronal magnetic flux ropes are closely related to large-scale solar activities. Using a 2.5-dimensional time-dependent ideal magnetohydrodynamic (MHD) model in Cartesian coordinates, we carry out numerical simulations to investigate the evolution of a magnetic system consisting of a flux rope embedded in a fully-closed quadrupolar magnetic field with different photospheric flux distributions. It is found that, when the photospheric flux is not concentrated too much towards the polarity inversion line (PIL) and the constraint exerted by the background field is not too weak, the equilibrium sta…
Multi-wavelength observations of a sigmoidal (S-shaped) solar coronal source by the EUV Imaging Spectrometer and the X-ray Telescope aboard the Hinode spacecraft and by the EUV Imager aboard STEREO are reported. The data reveal the coexistence of a pair of J-shaped hot arcs at temperatures T>2 MK with an S-shaped structure at somewhat lower temperatures T~1.3 MK. The middle section of the S-shaped structure runs along the polarity inversion line of the photospheric field, bridging the gap between the arcs. Flux cancellation occurs at the same location in the photosphere. The sigmoid forms in t…
It is widely accepted that coronal magnetic flux ropes are the core structures of large-scale solar eruptive activities, which inflict dramatic impacts on the solar-terrestrial system. Previous studies have demonstrated that varying magnetic properties of a coronal flux rope system could result in a catastrophe of the rope, which may trigger solar eruptive activities. Since the total mass of a flux rope also plays an important role in stabilizing the rope, we use 2.5-dimensional magnetohydrodynamic (MHD) numerical simulations in this letter to investigate how a flux rope evolves as its total m…
Many observations show that coronal holes (CHs) deviate coronal mass ejections (CMEs) away from them. However, there are some peculiar events reported where the opposite occurs. To contribute to a space weather forecast efforts, in relation to the prediction of CME trajectories, we study the interaction between flux ropes (FRs) and CHs through numerical simulations. We perform 2.5D numerical simulations where FRs and CHs interact with different relative polarity configurations. We also reconstruct the trajectory and magnetic environment of a peculiar event occurred on 30 April 2012. The numeri…
We report on a study comparing coronal flux ropes inferred from eruption data with their interplanetary counterparts constructed from in situ data. The eruption data include the source-region magnetic field, post-eruption arcades, and coronal mass ejections (CMEs). Flux ropes were fit to the interplanetary CMEs (ICMEs) considered for the 2011 and 2012 Coordinated Data Analysis Workshops (CDAWs). We computed the total reconnected flux involved in each of the associated solar eruptions and found it to be closely related to flare properties, CME kinematics, and ICME properties. By fitting flux ro…
Tracing magnetic flux rope footpoints in AR 12975 with coronal dimmings and data-driven magnetofrictional simulations
University of Helsinki（赫尔辛基大学）；University of Graz, Institute of Physics（格拉茨大学物理研究所）；University of Graz, Kanzelhöhe Observatory for Solar and Environmental Research（格拉茨大学坎泽勒霍厄太阳与环境研究天文台）；NorthWest Research Associates（西北研究协会）
Predicting the magnetic field within an Earth-directed coronal mass ejection (CME) well before its arrival at Earth is one of the most important issues in space weather research. In this article, we compare the intrinsic flux rope type, i.e. the CME orientation and handedness during eruption, with the in situ flux rope type for 20 CME events that have been uniquely linked from Sun to Earth through heliospheric imaging. Our study shows that the intrinsic flux rope type can be estimated for CMEs originating from different source regions using a combination of indirect proxies. We find that only …
We analyze five events of the interaction of coronal mass ejections (CMEs) with the remote coronal rays located up to 90^\circ away from the CME as observed by the SOHO/LASCO C2 coronagraph. Using sequences of SOHO/LASCO C2 images, we estimate the kink propagation in the coronal rays during their interaction with the corresponding CMEs ranging from 180 to 920 km/s within the interval of radial distances form 3 R. to 6 R. . We conclude that all studied events do not correspond to the expected pattern of shock wave propagation in the corona. Coronal ray deflection can be interpreted as the influ…
We investigate the timescales of evolution of stellar coronae in response to surface differential rotation and diffusion. To quantify this we study both the formation time and lifetime of a magnetic flux rope in a decaying bipolar active region. We apply a magnetic flux transport model to prescribe the evolution of the stellar photospheric field, and use this to drive the evolution of the coronal magnetic field via a magnetofrictional technique. Increasing the differential rotation (i.e. decreasing the equator-pole lap time) decreases the flux rope formation time. We find that the formation ti…
We investigate the transverse coronal-loop oscillations induced by the eruption of a prominence-carrying flux rope on 7 December 2012. The flux rope originating from NOAA Active Region (AR) 11621 was observed in EUV wavelengths by the SDO/AIA and in H$α$ line center by the ground-based telescope at the BBSO. The early evolution of the flux rope is divided into two steps: a slow rise phase at a speed of $\approx$230\,km\,s$^{-1}$ and a fast rise phase at a speed of $\approx$706\,km\,s$^{-1}$. The eruption generates a C5.8 flare and the onset of the fast rise is consistent with the HXR peak time…
Loss of equilibrium of magnetic flux ropes is a leading candidate for the origin of solar coronal mass ejections (CMEs). The aim of this paper is to explore to what extent this mechanism can account for the initiation of CMEs in the global context. A simplified MHD model for the global coronal magnetic field evolution in response to flux emergence and shearing by large-scale surface motions is described and motivated. Using automated algorithms for detecting flux ropes and ejections in the global magnetic model, the effects of key simulation parameters on the formation of flux ropes and the nu…
Coronal mass ejections (CMEs) are the most spectacular eruptive phenomena in the solar atmosphere. It is generally accepted that CMEs are results of eruptions of magnetic flux ropes (MFRs). However, a heated debate is on whether MFRs pre-exist before the eruptions or they are formed during the eruptions. Several coronal signatures, \textit{e.g.}, filaments, coronal cavities, sigmoid structures and hot channels (or hot blobs), are proposed as MFRs and observed before the eruption, which support the pre-existing MFR scenario. There is almost no reported observation about MFR formation during the…
We examine the propagation of several CMEs with well-observed flux rope signatures in the field of view of the SECCHI coronagraphs aboard the STEREO satellites using the GCS fitting method of Thernisien, Vourlidas \& Howard (2009). We find that the manner in which they propagate is approximately self-similar; i.e., the ratio ($κ$) of the flux rope minor radius to its major radius remains approximately constant with time. We use this observation of self-similarity to draw conclusions regarding the local pitch angle ($γ$) of the flux rope magnetic field and the misalignment angle ($χ$) between t…
The Automatic Identification and Tracking of Coronal Flux Ropes -- Part II: New Mathematical Morphology-based Flux Rope Extraction Method and Deflection Analysis
The aim of this work is to investigate and characterise non-thermal particle behaviour in a three-dimensional (3D) magnetohydrodynamical (MHD) model of unstable multi-threaded flaring coronal loops. We have used a numerical scheme which solves the relativistic guiding centre approximation to study the motion of electrons and protons. The scheme uses snapshots from high resolution numerical MHD simulations of coronal loops containing two threads, where a single thread becomes unstable and (in one case) destabilises and merges with an additional thread. The particle responses to the reconnection…
Coronal mass ejections (CMEs) are large-scale explosions of the coronal magnetic field. It is believed that magnetic reconnection significantly builds up the core structure of CMEs, a magnetic flux rope, during the eruption. However, the quantitative evolution of the flux rope, particularly its toroidal flux, is still unclear. In this paper, we study the evolution of the toroidal flux of the CME flux rope for four events. The toroidal flux is estimated as the magnetic flux in the footpoint region of the flux rope, which is identified by a method that simultaneously takes the coronal dimming an…
NOAA Active Region (AR) 11429 was the source of twin super-fast Coronal Mass Ejections (CMEs). The CMEs took place within a hour from each other, with the onset of the first taking place in the beginning of March 7, 2012. This AR fulfills all the requirements for a "super active region"; namely, Hale's law incompatibility and a $δ$-spot magnetic configuration. One of the biggest storms of Solar Cycle 24 to date ($D_{st}=-143$ nT) was associated with one of these events. Magnetic Flux Ropes (MFRs) are twisted magnetic structures in the corona, best seen in $\sim$10 MK hot plasma emission and ar…
Solar filament eruptions play a crucial role in triggering coronal mass ejections (CMEs). More than 80 % of eruptions lead to a CME. This correlation has been studied extensively during the past solar cycles and the last long solar minimum. The statistics made on events occurring during the rising phase of the new solar cycle 24 is in agreement with this finding. Both filaments and CMEs have been related to twisted magnetic fields. Therefore, nearly all the MHD CME models include a twisted flux tube, called a flux rope. Either the flux rope is present long before the eruption, or it is built u…
