一种用于低剖面可调谐和可操纵微纳的有源高阻抗表面
An Active High Impedance Surface for Low Profile Tunable and Steerable Antennas
摘要:
在这封信中,一个可调谐和可操纵天线的设计方法。天线模型是基于一个宽带蝴蝶结辐射元件安装在一个有源人工磁导体(AMC)。AMC几何结构由印刷在薄接地电介质板上的频率选择表面(FSS)组成,其中一些芯片组变容二极管通过通孔放置在金属元件和背板之间。所得到的天线可以通过简单地改变所有的变容二极管电容通过适当的偏置电压在S波段调谐。此外,该结构可以通过根据泄漏辐射原理向AMC表面的有源元件施加适当的偏置电压来在每个工作频率上操作射束扫描。低剖面有源天线的特征在于5.32mm的总厚度,其对应于工作频带中心处的大约λ/24。
英文摘要:
In this letter, an approach for designing a tunable and steerable antenna is presented. The antenna model is based on a wideband bow-tie radiating element mounted above an active Artificial Magnetic Conductor (AMC). The AMC geometry consists of a Frequency Selective Surface (FSS) printed on a thin grounded dielectric slab in which some chip-set varactor diodes are placed between the metallic elements and the backing plane through vias. The resulting antenna can be tuned over the S-Band by simply changing all varactor capacitances through an appropriate biasing voltage. Moreover, this structure can operate a beam scanning over each working frequency by applying an appropriate biasing voltage to the active elements of the AMC surface in accordance to leaky radiation principles. The low profile active antenna is characterized by an overall thickness of 5.32 mm, which corresponds to approximately lambda/24 at the centre of the operating band.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。