We propose a method to spatially confine or corral the movements of a micropendulum via the optical forces produced by two simultaneously excited optical modes of a photonic molecule comprising two microspherical cavities. We discuss how the cavity enhanced optical force generated in the photonic molecule can create an optomechanical potential of about 10 eV deep and 30 pm wide, which can be used to trap the pendulum at any given equilibrium position by a simple choice of laser frequencies. This result presents opportunities for very precise all-optical self-alignment of microsystems.
Optical energy flow inside a dielectric microsphere exposed to an optical wave is usually codirected with its wave vector. At the same time, if the optical field in a microparticle is in resonance with a high-quality spatial eigenmode, referred to as the whispering-gallery mode (WGM), at least two regions of reverse energy flow emerge in the illuminated and shadow particle hemispheres. These areas are of considerable practical interest due to their enhanced optical trapping potential provided they should be previously cleared from particle material. In this paper, we consider a perforated micr…
We have theoretically investigated optical tweezing of gain-functionalized microspheres using a highly focused single beam in the nonparaxial regime. We employ the Mie-Debye theory of optical tweezers to calculate the optical force acting on homogeneous and core-shell Mie microspheres with gain. We demonstrate that the optical gain plays a crucial role in optical manipulation, especially to optimize the restoring force and thus allowing for trapping of large refractive index and plasmonic particles. Indeed we demonstrate that one can trap such particles, which is usually not possible in the ca…
A high sensitivity force sensor based on dielectric microspheres in vacuum, optically trapped by a single, upward-propagating laser beam, is described. Off-axis parabolic mirrors are used both to focus the 1064~nm trapping beam and to recollimate it to provide information on the horizontal position of the microsphere. The vertical degree of freedom is readout by forming an interferometer between the light retroreflected by the microsphere and a reference beam, hence eliminating the need for auxiliary beams. The focus of the trapping beam has a 1/e$^2$ radius of 3.2~$μ$m and small non-Gaussian …
Trapping of microspheres with a single focused laser beam is usually limited to materials with relative refractive indexes slightly larger than one. We show that directional light scattering can be employed to optically trap high-index materials. For this purpose, we propose a material platform to achieve zero backward scattering (ZBS), also known as the first Kerker condition, in a composite media containing spherical inclusions of silica embedded in a SiC microsphere. By tuning the volume filling fraction of inclusions and the microsphere radius, stable trapping can be achieved, provided tha…
A technique to levitate and measure the three-dimensional position of micrometer-sized dielectric spheres with heterodyne detection is presented. The two radial degrees of freedom are measured by interfering light transmitted through the microsphere with a reference wavefront, while the axial degree of freedom is measured from the phase of the light reflected from the surface of the microsphere. This method pairs the simplicity and accessibility of single beam optical traps to a measurement of displacement that is intrinsically calibrated by the wavelength of the trapping light and has excepti…
Optical energy flow inside a dielectric microsphere is usually codirected with the optical wavevector. At the same time, if the optical field in a microsphere is in resonance with one of the high-quality spatial eigenmodes (whispering-gallery modes - WGMs), a region of reverse energy flow emerges in the shadow hemisphere. This area is of considerable practical interest due to increased optical trapping potential. In this Letter, we consider a perforated microsphere with an air-filled single pinhole fabricated along the particle diameter and numerically analyze the peculiarities of WGM excitati…
We demonstrate scaffolding of plasmonic nanoparticles by topological defects induced by colloidal microspheres to match their surface boundary conditions with a uniform far-field alignment in a liquid crystal host. Displacing energetically costly liquid crystal regions of reduced order, anisotropic nanoparticles with concave or convex shapes not only stably localize in defects but also self-orient with respect to the microsphere surface. Using laser tweezers, we manipulate the ensuing nanoparticle-microsphere colloidal dimers, probing the strength of elastic binding and demonstrating self-asse…
Dielectric microspheres or microbeads can squeeze light into the subwavelength scale via photonic nanojet (PNJ) focusing. This enables strong light-matter interactions within its focus and induces extraordinary effects such as enhancements in light emission, signal collection and various other applications. However, critical challenges exist on how to efficiently and precisely loading the studied objects into the desired location of the PNJ focusing, and subsequently measure the field and signal of interests precisely and reliably. Such technique is currently missing. We present for the first …
Subwavelength imaging by microsphere lenses is a promising label-free super-resolution imaging technique. There is a growing interest to use live cells to replace the widely used non-biological microsphere lenses. In this work, we demonstrate the use of yeast cells for such imaging purpose. Using fiber-based optical trapping technique, we successfully trapped a chain of yeast cells and bring them to the vicinity of imaging objects. These yeast cells work as near-field magnifying lenses and simultaneously pick up the sub-diffraction information of the nanoscale objects under each cell and proje…
We show that the optical force field in optical tweezers with elliptically polarized beams has the opposite handedness for a wide range of particle sizes and for the most common configurations. Our method is based on the direct observation of the particle equilibrium position under the effect of a transverse Stokes drag force, and its rotation around the optical axis by the mechanical effect of the optical torque. We find overall agreement with theory, with no fitting, provided that astigmatism, which is characterized separately, is included in the theoretical description. Our work opens the w…
Optomechanical systems are suitable for elucidating quantum phenomena at the macroscopic scale in the sense of the mass scale. The systems should be well-isolated from the environment to avoid classical noises, which conceal quantum signals. Optical levitation is a promising way to isolate optomechanical systems from the environment. To realize optical levitation, all degrees of freedom need to be trapped. Until now, longitudinal trapping and rotational trapping of a mirror with optical radiation pressure have been studied in detail and validated with various experiments. However, less attenti…
The non-conservative, azimuthal forces associated with inhomogeneous optical-spin angular momentum play a critical role in optical trapping. Intriguingly, birefringent microspheres can be stably levitated and rapidly rotated in circularly polarized optical traps in ultra-high vacuum whereas isotropic spheres are typically destabilized and expelled, even at relatively modest pressures. Here we show that the resolution of this apparent key paradox rests in the form of the orientationally averaged, effective forces acting on the spinning birefringent particle. In particular, the effective azimuth…
