Micro-optomechanical systems are central to a number of recent proposals for realizing quantum mechanical effects in relatively massive systems. Here we focus on a particular class of experiments which aim to demonstrate massive quantum superpositions, although the obtained results should be generalizable to similar experiments. We analyze in detail the effects of finite temperature on the interpretation of the experiment, and obtain a lower bound on the degree of non-classicality of the cantilever. Although it is possible to measure the quantum decoherence time when starting from finite temperature, an unambiguous demonstration of a quantum superposition requires the mechanical resonator to be in or near the ground state. This can be achieved by optical cooling of the fundamental mode, which also provides a method to measure the mean phonon number in that mode. We also calculate the rate of environmentally induced decoherence and estimate the timescale for gravitational collapse mechanisms as proposed by Penrose and Diosi. In view of recent experimental advances, practical considerations for the realization of the described experiment are discussed.
We propose a scheme to prepare macroscopic quantum superpositions of motion in optomachanical nano- or micromechanical oscillators quadratically coupled to an intracavity field. The nonlinear optomechanical coupling leads to an effective degenerate three-wave mixing interaction between the mechanical and cavity modes. The quantum superpositions result from the combined effects of the interaction and cavity dissipation. We show analytically and confirm numerically that various deterministic quantum superpositions can be achieved, depending on initial mechanical state. The effect of mechanical d…
We present a scheme for achieving macroscopic quantum superpositions in optomechanical systems by using single photon postselection and detecting them with nested interferometers. This method relieves many of the challenges associated with previous optical schemes for measuring macroscopic superpositions, and only requires the devices to be in the weak coupling regime. It requires only small improvements on currently achievable device parameters, and allows observation of decoherence on a timescale unconstrained by the system's optical decay time. Prospects for observing novel decoherence mech…
We propose a method to generate and detect large quantum superposition states and arbitrary Fock states for the oscillational mode of an optically levitated nanocrystal diamond. The nonlinear interaction required for the generation of non-Gaussian quantum states is enabled through the spin-mechanical coupling with a built-in nitrogen-vacancy center inside the nanodiamond. The proposed method allows the generation of large superpositions of nanoparticles with millions of atoms and the observation of the associated spatial quantum interference under reasonable experimental conditions.
We propose an efficient approach to generate the superposed macroscopically squeezed states with enhanced squeezing in a two-mode optomechanical system. This can be achieved by introducing a sinusoidal modulation to either the cavity frequencies or the coupling strengths between two cavity modes. The squeezement of the oscillator can be significantly enhanced to 12.16 dB with single photon, once the relative ratio of coupling strength is optimized under proper conditions. Further enhanced squeezing can be obtained by carefully adjusting the system parameters. In terms of the Wigner quasi-proba…
We propose an experimental protocol to realize discrete variable quantum teleportation using optomechanical devices. The photonic polarization superposition state of a single photon is teleported to a phononic superposition of two micromechanical oscillators by means of photon/phonon entanglement generation and optical Bell state measurement using two-photon interference. Verification of the protocol is performed by coherent state transfer between the mechanical devices and light. Simulations show the feasibility of the proposed scheme at millikelvin temperatures using state-of-the-art gigaher…
Quantum optomechanics uses optical means to generate and manipulate quantum states of motion of mechanical resonators. This provides an intriguing platform for the study of fundamental physics and the development of novel quantum devices. Yet, the challenge of reconstructing and verifying the quantum state of mechanical systems has remained a major roadblock in the field. Here, we present a novel approach that allows for tomographic reconstruction of the quantum state of a mechanical system without the need for extremely high quality optical cavities. We show that, without relying on the usual…
The transition from quantum to classical physics remains an intensely debated question even though it has been investigated for more than a century. Further clarifications could be obtained by preparing macroscopic objects in spatial quantum superpositions and proposals for generating such states for nano-mechanical devices either in a transient or a probabilistic fashion have been put forward. Here we introduce a method to deterministically obtain spatial superpositions of arbitrary lifetime via dissipative state preparation. In our approach, we engineer a double-well potential for the motion…
An interferometric scheme for the creation of momentum superposition states of mechanical oscillators, using a quantum mirror kicked by free photons is analyzed. The scheme features ultra-fast preparation with immediate detection and should allow for the observation of signatures of momentum superpositions in a massive macroscopic system at non-zero temperatures. It is robust against thermalized initial states, displacement and movement, mirror imperfections, and the measurements' back-actions.
We present a novel proposal for generating quantum superpositions of macroscopically distinct states of a bulk mechanical oscillator, compatible with existing optomechanical devices operating in the readily achievable bad-cavity limit. The scheme is based on a pulsed cavity optomechanical quantum non-demolition (QND) interaction, driven by displaced non-Gaussian states, and measurement-induced feedback, avoiding the need for strong single-photon optomechanical coupling. Furthermore, we show that single-quadrature cooling of the mechanical oscillator is sufficient for efficient state preparatio…
Optomechanics is currently believed to provide a promising route towards the achievement of genuine quantum effects at the large, massive-system scale. By using a recently proposed figure of merit that is well suited to address continuous-variable systems, in this paper we analyze the requirements needed for the state of a mechanical mode (embodied by an end-cavity cantilever or a membrane placed within an optical cavity) to be qualified as macroscopic. We show that, according to the phase space-based criterion that we have chosen for our quantitative analysis, the state achieved through stron…
Schrödinger cat states, consisting of superpositions of macroscopically distinct states, provide key resources for a large number of emerging quantum technologies in quantum information processing. Here we propose how to generate and manipulate mechanical and optical Schrödinger cat states with distinguishable superposition components by exploiting the unique properties of cavity optomechanical systems based on Bose-Einstein condensate. Specifically, we show that in comparison with its solid-state counterparts, almost a $3$ order of magnitude enhancement in the size of the mechanical Schröding…
A nonlocal circulator protocol is proposed in hybrid optomechanical system. By analogy with quantum communication, using the input-output relationship, we establish the quantum channel between two optical modes with long-range. The three body nonlocal interaction between the cavity and the two oscillators is obtained by eliminating the optomechanical cavity mode and verifying the Bell-CHSH inequality of continuous variables. By introducing the phase accumulation between cyclic interactions, the unidirectional transmission of quantum state between optical mode and two mechanical modes are achie…
We analyse a proposal that we have recently put forward for an interface between matter-wave and optomechanical technologies from the perspective of macroscopic quantumness. In particular, by making use of a measure of macroscopicity in quantum superpositions that is particularly well suited for continuous variables systems, we demonstrate the existence of working points for our interface at which a quantum mechanical superposition of genuinely mesoscopic states is achieved. Our proposal thus holds the potential to affirm itself as a viable atom-to-mechanics transducer of quantum coherences.
While the existence of quantum superpositions of massive particles over microscopic separations has been established since the birth of quantum mechanics, the maintenance of superposition states over macroscopic separations is a subject of modern experimental tests. In Ref. [1], T. Kovachy et al. report on applying optical pulses to place a freely falling Bose-Einstein condensate into a superposition of two trajectories that separate by an impressive distance of 54 cm before being redirected toward one another. When the trajectories overlap, a final optical pulse produces interference with hig…
A deterministic scheme for generating a macroscopic superposition state of a nanomechanical resonator is proposed. The nonclassical state is generated through a suitably engineered dissipative dynamics exploiting the optomechanical quadratic interaction with a bichromatically driven optical cavity mode. The resulting driven dissipative dynamics can be employed for monitoring and testing the decoherence processes affecting the nanomechanical resonator under controlled conditions.
The preceding BCA (Stamper-Kurn et. al., arXiv:1607.01454) asserts that our observation of interference contrast in a half-metre-scale atom interferometer (Kovachy et. al., Nature 528, 530-3 (2015)) does not prove the existence of macroscopic quantum superpositions and hence does not test quantum mechanics at long length scales. Moreover, the BCA implies that intrinsic atomic interactions or technical imperfections could prevent the application of our work to future differential measurements. On the contrary, we argue the following: i) in standard quantum mechanics, there is no known mechanism…
The test of modifications to quantum mechanics aimed at identifying the fundamental reasons behind the un-observability of quantum mechanical superpositions at the macro-scale is a crucial goal of modern quantum mechanics. Within the context of collapse models, current proposals based on interferometric techniques for their falsification are far from the experimental state-of-the-art. Here we discuss an alternative approach to the testing of quantum collapse models that, by bypassing the need for the preparation of quantum superposition states might help us addressing non-linear stochastic mec…
We propose a scheme to prepare a macroscopic mechanical oscillator in a catlike state, close to a coherent state superposition. The mechanical oscillator, coupled by radiation-pressure interaction to a field in an optical cavity, is first prepared close to a squeezed vacuum state using a reservoir engineering technique. The system is then probed using a short optical pulse tuned to the lower motional sideband of the cavity resonance, realizing a photon-phonon swap interaction. A photon number measurement of the photons emerging from the cavity then conditions a phonon-subtracted catlike state …
We consider a cavity optomechanical cooling configuration consisting of a mechanical resonator (denoted as resonator b) and an electromagnetic resonator (denoted as resonator a), which are coupled in such a way that the effective resonance frequency of resonator a depends linearly on the displacement of resonator b. We study whether back-reaction effects in such a configuration can be efficiently employed for suppression of decoherence. To that end, we consider the case where the mechanical resonator is prepared in a superposition of two coherent states and evaluate the rate of decoherence. We…
Quantum superposition in mechanical systems is not only key evidence for macroscopic quantum coherence, but can also be utilized in modern quantum technology. Here we propose an efficient approach for creating macroscopically distinct mechanical superposition states in a two-mode optomechanical system. Photon hopping between the two cavity modes is modulated sinusoidally. The modulated photon tunneling enables an ultrastrong radiation-pressure force acting on the mechanical resonator, and hence significantly increases the mechanical displacement induced by a single photon. We study systematica…
Quantum experiments with nanomechanical oscillators are regarded as a testbed for hypothetical modifications of the Schrödinger equation, which predict a breakdown of the superposition principle and induce classical behavior at the macro-scale. It is generally believed that the sensitivity to these unconventional effects grows with the mass of the mechanical quantum system. Here we show that the opposite is the case for optomechanical systems in the presence of generic noise sources, such as thermal and measurement noise. We determine conditions for distinguishing these decoherence processes f…
We propose a reliable scheme to simulate tunable and ultrastrong mixed (first-order and quadratic optomechanical couplings coexisting) optomechanical interactions in a coupled two-mode bosonic system, in which the two modes are coupled by a cross-Kerr interaction and one of the two modes is driven through both the single- and two-excitation processes. We show that the mixed-optomechanical interactions can enter the single-photon strong-coupling and even ultrastrong-coupling regimes. The strengths of both the first-order and quadratic optomechanical couplings can be controlled on demand, and he…
We predict the occurrence of single-photon-induced entanglement and quantum superposition in a hybrid quantum model, introducing an optomechanical coupling into the Rabi model. Originally, it comes from the photon-dependent quantum property of ground state featured by the proposed hybrid model. It associates with a single-photon-induced quantum phase transition, and is immune to the $A^2$ term of the spin-field interaction. Moreover, the obtained quantum superposition state is actual a squeezed cat state, which can give a significant precision enhancement in quantum metrology. This work offers…
In this paper, we are exploring the feasibility of observing non-classical features of gravity in a low-energy regime in a quantum optomechanical experiment. If gravity is to have an underlying quantum nature, it should hold the most fundamental quantum characteristics such as the superposition principle and entanglement. Despite the weakness of gravity, in principle there is a chance, to observe such a quantum signature of the gravity by exploiting the quantum optomechanical techniques, without direct observation of graviton. We are investigating a new dynamical scheme called, gravitational q…
In cavity optomechanics, light is used to control mechanical motion. A central goal of the field is achieving single-photon strong coupling, which would enable the creation of quantum superposition states of motion. Reaching this limit requires significant improvements in optomechanical coupling and cavity coherence. Here we introduce an optomechanical architecture consisting of a silicon nitride membrane coupled to a three-dimensional superconducting microwave cavity. Exploiting their large quality factors, we achieve an optomechanical cooperativity of 146,000 and perform sideband cooling of …
We analyze a method for the creation, storage and retrieval of optomechanical Schrodinger cat states, in which there is a quantum superposition of two distinct macroscopic states of a mechanical oscillator. In the proposal, an optical cat state is first prepared in an optical cavity, then transferred to the mechanical mode, where it is stored and later retrieved using control fields. We carry out numerical simulations for the quantum memory protocol for optomechanical cat states using the positive-P phase space representation. This has a compact, positive representation for a cat state, thus a…
We analyze an experimental method for creating interesting nonclassical states by processing the entanglement generated when two large coherent states interact in a cross-Kerr medium. We specifically investigate the effects of loss and noise in every mode of the experiment, as well as the effect of "binning" the post-selection outcomes. Even with these imperfections, we find an optimal set of currently-achievable parameters which would allow a proof-of-principle demonstration of number squeezing in states with large mean photon number. We discuss other useful states which can be generated with…
Phase-controlled bipartite and tripartite entanglement and Bell nonlocality in a closed-loop optomechanical system
Beijing Institute of Radio Metrology and Measurement（北京无线电计量测试研究所）；Science and Technology on Metrology and Calibration Laboratory, Beijing Institute of Radio Metrology and Measurement（北京无线电计量测试研究所计量与校准重点实验室）
In the framework of the nonsecular perturbation theory based on the Bogoliubov averaging method, an optomechanical system with an asymmetric anharmonic mechanical resonator is studied. The cross-Kerr interaction and the Kerr-like self-interaction of photons and vibration quanta arise in the Hamiltonian. These interactions are induced by both cubic and quartic nonlinearities of oscillations of the mechanical resonator and the cavity-resonator interaction that is linear in mechanical displacements. We demonstrate a bistable behavior of the number of vibration quanta and find that this behavior i…
Demonstrating quantum superiority for some computational task will be a milestone for quantum technologies and would show that computational advantages are possible not only with a universal quantum computer but with simpler physical devices. Linear optics is such a simpler but powerful platform where classically-hard information processing tasks, such as Boson Sampling, can be in principle implemented. In this work, we study a fundamentally different type of computational task to achieve quantum superiority using linear optics, namely the task of verifying NP-complete problems. We focus on a …
A nanoscale object evidenced in a non-classical state of its centre of mass will hugely extend the boundaries of quantum mechanics. To obtain a practical scheme for the same, we exploit a hitherto unexplored coupled system: an atom and a nanoparticle coupled by an optical field. We show how to control the center-of-mass of a large $\sim500$nm nanoparticle using the internal state of the atom so as to create, as well as detect, nonclassical motional states of the nanoparticle. Specifically, we consider a setup based on a silica nanoparticle coupled to a Cesium atom and discuss a protocol for pr…
Experimental observation of the decoherence of macroscopic objects is of fundamental importance to the study of quantum collapse models and the quantum to classical transition. Optomechanics is a promising field for the study of such models because of its fine control and readout of mechanical motion. Nevertheless, it is challenging to monitor a mechanical superposition state for long enough to investigate this transition. We present a scheme for entangling two mechanical resonators in spatial superposition states such that all quantum information is stored in the mechanical resonators. The sc…
We propose and analyze nonlinear optomechanical protocols that can be implemented by adding a single atom to an optomechanical cavity. In particular, we show how to engineer the environment in order to dissipatively prepare the mechanical oscillator in a superposition of Fock states with fidelity close to one. Furthermore, we discuss how a single atom in a cavity with several mechanical oscillators can be exploited to realize nonlinear many-body physics by stroboscopically driving the mechanical oscillators. We show how to prepare non-classical many-body states by either applying coherent prot…
The performance of a radiatively cooled instrument is investigated in the context of optomechanical quantum experiments, where the environment of a macroscopic particle in a quantum-superposition has to be cooled to less than 20\,K in deep space. A heat-transfer analysis between the components of the instrument as well as a transfer-function analysis on thermal oscillations induced by the spacecraft interior and by dissipative sources is performed. The thermal behaviour of the instrument in an orbit around a Lagrangian point and in a highly elliptical Earth orbit is discussed. Finally, we inve…
We propose an approach to enhance the mechanical effects of single photons in a two-mode optomechanical system. This is achieved by introducing a resonance-frequency modulation to the cavity fields. When the modulation frequency and amplitude satisfy certain conditions, the mechanical displacement induced by single photons could be larger than the quantum zero-point fluctuation of the oscillating resonator. This method can be used to create distinct mechanical superposition states.
Realization of indefinite causal order (ICO), a theoretical possibility that even causal relations between physical events can be subjected to quantum superposition, apart from its general significance for the fundamental physics research, would also enable quantum information processing that outperforms protocols in which the underlying causal structure is definite. In this paper, we start with a proposition that an observer in a state of quantum superposition of being at two different relative distances from the event horizon of a black hole, effectively resides in ICO space-time generated b…
Precision measurement of non-linear observables is an important goal in all facets of quantum optics. This allows measurement-based non-classical state preparation, which has been applied to great success in various physical systems, and provides a route for quantum information processing with otherwise linear interactions. In cavity optomechanics much progress has been made using linear interactions and measurement, but observation of non-linear mechanical degrees-of-freedom remains outstanding. Here we report the observation of displacement-squared thermal motion of a micro-mechanical resona…
The most striking feature of quantum mechanics is the existence of superposition states, where an object appears to be in different situations at the same time. The existence of such states has been tested with small objects, like atoms, ions, electrons and photons, and even with molecules. More recently, it has been possible to create superpositions of collections of photons, atoms, or Cooper pairs. Current progress in optomechanical systems may soon allow us to create superpositions of even larger objects, like micro-sized mirrors or cantilevers, and thus to test quantum mechanical phenomena…
The Einstein Equivalence Principle (EEP) has a central role in the understanding of gravity and space-time. In its weak form, or Weak Equivalence Principle (WEP), it directly implies equivalence between inertial and gravitational mass. Verifying this principle in a regime where the relevant properties of the test body must be described by quantum theory has profound implications. Here we report on a novel WEP test for atoms. A Bragg atom interferometer in a gravity gradiometer configuration compares the free fall of rubidium atoms prepared in two hyperfine states and in their coherent superpos…
The investigation of macroscopic quantum phenomena is a current active area of research that offers significant promise to advance the forefronts of both fundamental and applied quantum science. Utilizing the exquisite precision and control of quantum optics provides a powerful toolset for generating such quantum states where the types and 'size' of the states that can be generated are set by the resourcefulness of the protocol applied. In this work we present a new scheme for 'growing' macroscopic superposition states of motion of a mechanical oscillator via cavity quantum optomechanics. The …
Integrated photonic circuits are key components for photonic quantum technologies and for the implementation of chip-based quantum devices. Future applications demand flexible architectures to overcome common limitations of many current devices, for instance the lack of tuneabilty or built-in quantum light sources. Here, we report on a dynamically reconfigurable integrated photonic circuit comprising integrated quantum dots (QDs), a Mach-Zehnder interferometer (MZI) and surface acoustic wave (SAW) transducers directly fabricated on a monolithic semiconductor platform. We demonstrate on-chip si…
Recent developments in space technology like micro-propulsion systems for drag-free control, thermal shielding, ultra-stable laser sources and stable optical cavities set an ideal platform for quantum optomechanical experiments with optically trapped dielectric spheres. Here, we will provide an overview of the results of recent studies aiming at the realization of the space mission MAQRO to test the foundations of quantum physics in a parameter regime orders of magnitude beyond existing experiments. In particular, we will discuss DECIDE, which is an experiment to prepare and then study a Schrö…
The observation of genuine quantum features of nano-mechanical motion is a key goal for both fundamental and applied quantum science. To this end, a promising approach is the stabilization of nonclassical features in the presence of dissipation, by means of the tunable coupling with a photonic environment. Here we present a scheme that combines dissipative squeezing with a mechanical nonlinearity to stabilize arbitrary approximations of (displaced) mechanical Fock state of any number. We consider an optomechanical system driven by three control lasers--at the cavity resonance and at the two me…
The superposition principle is the cornerstone of quantum mechanics, leading to a variety of genuinely quantum effects. Whether the principle applies also to macroscopic systems or, instead, there is a progressive breakdown when moving to larger scales, is a fundamental and still open question. Spontaneous wavefunction collapse models predict the latter option, thus questioning the universality of quantum mechanics. Technological advances allow to challenge collapse models and the quantum superposition principle more and more with a variety of different experiments. Among them, non-interferome…
Exploring the quantum behaviour of macroscopic objects provides an intriguing avenue to study the foundations of physics and to develop a suite of quantum-enhanced technologies. One prominent path of study is provided by quantum optomechanics which utilizes the tools of quantum optics to control the motion of macroscopic mechanical resonators. Despite excellent recent progress, the preparation of mechanical quantum superposition states remains outstanding due to weak coupling and thermal decoherence. Here we present a novel optomechanical scheme that significantly relaxes these requirements al…
The dissipative quantum dynamics of an anharmonic oscillator is investigated theoretically in the context of carbon-based nano-mechanical systems. In the short-time limit, it is known that macroscopic superposition states appear for such oscillators. In the long-time limit, single and multi-phonon dissipation lead to decoherence of the non-classical states. However, at zero temperature, as a result of two-phonon losses the quantum oscillator eventually evolves into a non-classical steady state. The relaxation of this state due to thermal excitations and one-phonon losses is numerically and ana…
