An infinite family of axisymmetric charged dust disks of finite extension is presented. The disks are obtained by solving the vacuum Einstein-Maxwell equations for conformastatic spacetimes, which are characterized by only one metric function. In order to obtain the solutions, it is assumed that the metric function and the electric potential are functionally related and that the metric function is functionally dependent of another auxiliary function, which is taken as a solution of Laplace equation. The solutions for the auxiliary function are then taken as given by the infinite family of generalized Kalnajs disks recently obtained by González and Reina (MNRAS 371, 1873, 2006), which is expressed in terms of the oblate spheroidal coordinates and represents a well behaved family of finite axisymmetric flat galaxy models. The so obtained relativistic thin disks have then a charge density that is equal, except maybe by a sign, to their mass density, in such a way that the electric and gravitational forces are in exact balance. The energy density of the disks is everywhere positive and well behaved, vanishing at the edge. Accordingly, as the disks are made of dust, their energy-momentum tensor it agrees with all the energy conditions.
An infinite family of finite axisymmetric charged dust disks is presented. The disks are obtained by solving the Einstein-Maxwell equations for conformastatic spacetimes by assuming a functional dependency between the time-like component of the electromagnetic potential and the metric potential in terms of a solution of the Laplace equation. We give solutions to the Einstein-Maxwell equations with disk sources of finite extension in which the charge density is proportional to the energy surface density. We apply the well-know "inverse" approach to the gravitational potential representing finit…
We construct relativistic models of charged dust thick disks for a particular conformastatic spacetime through a Miyamoto-Nagai transformation used in Newtonian gravity to model disk like galaxies. Two simple families of thick disk models and a family of thick annular disks based on the field of an extreme Reissner-Nordström black hole and a Morgan-Morgan-like metric are considered. The electrogeodesic motion of test particles around the structures are analyzed. Also the stability of the particles against radial perturbation is studied using an extension of the Rayleigh criteria of stability o…
Two new families of exact solutions to the Einstein equations for a conformastatic spacetime with axial symmetry are presented which describe thin disks of dust immersed in a spheroidal halo. The solutions are obtained by expressing the metric function in terms of an auxiliary function which satisfies the Laplace equation, a characteristic property of the conformastatic spacetimes. The first family of solutions is obtained from the displacement, cut and reflexion method, which introduces a discontinuity in the first $z$-derivate of the metric tensor across the plane of the disk. The second fam…
From Newtonian potential-density pairs we construct three-dimensional axisymmetric relativistic sources for a Majumdar-Papapetrou type conformastatic spacetime. As simple examples, we build two family of relativistic thick disks from of the first two Miyamoto-Nagai potential-density pairs used in Newtonian gravity to model flat galaxies, and a three-component relativistic model of galaxy (bulge, disk and dark matter halo). We study the equatorial circular motion of test particles around such structures. Also the stability of the orbits is analyzed for radial perturbation using an extension of …
Conformastationary metrics have been derived by Perjes and by Israel and Wilson as source-free solutions of the Einstein-Maxwell equations. By analogy with the conformastatic metrics which have charged dust sources it was assumed that conformastationary metrics would be the external metrics of charged dust in steady motion. However for axially symmetric conformastationary metrics we show that, as well as moving dust, hoop tensions are always necessary to balance the centrifugal forces induced by the motion. Exact examples of conformastationary metrics with disk sources are worked out in full. …
The well-known ``displace, cut and reflect'' method used to generate disks from given solutions of Einstein field equations is applied to the superposition of twoextreme Reissner-Nordstrom black holes to construct disks made of charged dust and alsonon-axisymmetric planar distributions of charged dust on the z=0 plane. They are symmetric with respect to twoor one coordinate axes, depending whether the black holes have equal or unequal masses, respectively.For these non-axisymmetric distributions of matter we also study the effective potential for geodesic motion of neutral test particles.
Local observers in stationary axisymmetric dust spacetimes
Università dell’Insubria（因苏布里亚大学）；Istituto Nazionale di Fisica Nucleare (INFN)（意大利国家核物理研究所）；Como Lake centre for AstroPhysics (CLAP)（科莫湖天体物理中心）；Istituto Nazionale di Astrofisica (INAF)（意大利国家天体物理研究所）；Istituto di Astrofisica e Planetologia Spaziali (IAPS)（天体物理学与行星科学研究所）
Symmetries of spacetimes with null dust field as a source compatible with asymptotic flatness are studied by using the Bondi-Sachs-van der Burg formalism. It is shown that in an axially symmetric spacetime with null dust field in which at least locally a smooth null infinity in the sense of Penrose exists, the only allowable additional Killing vector forming with the axial one a two-dimensional Lie algebra (the axial and the additional Killing vector are not assumed to be hypersurface orthogonal) is a supertranslational Killing vector and the gravitational field is then non-radiative (the Weyl…
We study Majumdar-Papapetrou solutions for the 3+1 Einstein-Maxwell equations, with charged dust acting as the external source for the fields. The spherically symmetric solution of Gürses is considered in detail. We introduce new parameters that simplify the construction of class $C^1$, singularity-free geometries. The arising sources are bounded or unbounded, and the redshift of light signals allows an observer at spatial infinity to distinguish these cases. We find out an interesting affinity between the conformastatic metric and some homothetic, matter and Ricci collineations. The associate…
We review explicit solutions to the stationary axisymmetric Einstein-Maxwell equations which can be interpreted as disks of charged dust. The disks of finite or infinite extension are infinitesimally thin and constitute a surface layer at the boundary of an electro-vacuum. The Einstein-Maxwell equations in the presence of one Killing vector are obtained by using a projection formalism. The SU(2,1) invariance of the stationary Einstein-Maxwell equations can be used to construct solutions for the electro-vacuum from solutions to the pure vacuum case via a so-called Harrison transformation. It is…
The interpretation of so-called cosmic string in black hole spacetimes has settled down to an unsatisfactory state. In this article we try to provide a different model for these cosmic strings by explicit construction of these spacetimes from the Bonnor rocket solution. It is shown that the correct stress-energy tensor is that of null dust with a rather strange energy density --- first derivative of Dirac delta distribution. We will discuss the Schwarzschild solution and the C--metric. In the latter case we will show that there is a momentum flux through the cosmic string, causing the accelera…
We present a three-parameter family of solutions to the stationary axisymmetric Einstein equations that describe differentially rotating disks of dust. They have been constructed by generalizing the Neugebauer-Meinel solution of the problem of a rigidly rotating disk of dust. The solutions correspond to disks with angular velocities depending monotonically on the radial coordinate; both decreasing and increasing behaviour is exhibited. In general, the solutions are related mathematically to Jacobi's inversion problem and can be expressed in terms of Riemann theta functions. A particularly inte…
We use a Harrison transformation on solutions to the stationary axisymmetric Einstein equations to generate solutions of the Einstein-Maxwell equations. The case of hyperelliptic solutions to the Ernst equation is studied in detail. Analytic expressions for the metric and the multipole moments are obtained. As an example we consider the transformation of a family of counter-rotating dust disks. The resulting solutions can be interpreted as disks with currents and matter with a purely azimuthal pressure or as two streams of freely moving charged particles. We discuss interesting limiting cases …
Disks of collisionless particles are important models for certain galaxies and accretion disks in astrophysics. We present here a solution to the stationary axisymmetric Einstein equations which represents an infinitesimally thin dust disk consisting of two streams of particles circulating with constant angular velocity in opposite directions. These streams have the same density distribution but their relative density may vary continuously. In the limit of only one component of dust, we get the solution for the rigidly rotating dust disk previously given by Neugebauer and Meinel, in the limit …
This is the second in a series of papers on the construction of explicit solutions to the stationary axisymmetric Einstein equations which can be interpreted as counter-rotating disks of dust. We discuss the class of solutions to the Einstein equations for disks with constant angular velocity and constant relative density which was constructed in the first part. The metric for these spacetimes is given in terms of theta functions on a Riemann surface of genus 2. We discuss the metric functions at the axis of symmetry and the disk. Interesting limiting cases are the Newtonian limit, the static …
The exact global solution of the Einstein equations [Neugebauer & Meinel, Phys. Rev. Lett. 75 (1995) 3046] describing a rigidly rotating, self-gravitating disk is discussed. The underlying matter model is a perfect fluid in the limit of vanishing pressure. The solution represents the general-relativistic analogue of the classical Maclaurin disk. It was derived by applying solution techniques from soliton theory to the axisymmetric, stationary vacuum Einstein equations. In contrast to the Newtonian solution, there exists an upper limit for the total mass of the disk - if the angular momentum is…
This is the first in a series of papers on the construction of explicit solutions to the stationary axisymmetric Einstein equations which describe counter-rotating disks of dust. These disks can serve as models for certain galaxies and accretion disks in astrophysics. We review the Newtonian theory for disks using Riemann-Hilbert methods which can be extended to some extent to the relativistic case where they lead to modular functions on Riemann surfaces. In the case of compact surfaces these are Korotkin's finite gap solutions which we will discuss in this paper. On the axis we establish for …
We solve a class of boundary value problems for the stationary axisymmetric Einstein equations corresponding to a disk of dust rotating uniformly around a central black hole. The solutions are given explicitly in terms of theta functions on a family of hyperelliptic Riemann surfaces of genus 4. In the absence of a disk, they reduce to the Kerr black hole. In the absence of a black hole, they reduce to the Neugebauer-Meinel disk.
This is the third in a series of papers on the construction of explicit solutions to the stationary axisymmetric Einstein equations which can be interpreted as counter-rotating disks of dust. We discuss the physical properties of a class of solutions to the Einstein equations for disks with constant angular velocity and constant relative density which was constructed in the first part. The metric for these spacetimes is given in terms of theta functions on a Riemann surface of genus 2. It is parameterized by two physical parameters, the central redshift and the relative density of the two coun…
Stationary, axisymmetric and asymptotically flat spacetimes of dust of which trajectories are integral curves of the time translation Killing vector are investigated. The flow has no Newtonian limit. Asymptotic flatness implies the existence of singularities of the curvature scalar that are distributions and that are not isolated from regularity regions of the flow. The singularities are closely related to the presence of additional stresses that contribute negative active mass to the total (Komar) mass, which is zero for asymptotically flat spacetimes. Several families of solutions are constr…
We have developed a numerical code to study the evolution of self-gravitating matter in dynamic black hole axisymmetric spacetimes in general relativity. The matter fields are evolved with a high-resolution shock-capturing scheme that uses the characteristic information of the general relativistic hydrodynamic equations to build up a linearized Riemann solver. The spacetime is evolved with an axisymmetric ADM code designed to evolve a wormhole in full general relativity. We discuss the numerical and algorithmic issues related to the effective coupling of the hydrodynamical and spacetime pieces…
The two known exact solutions of Einstein's field equations describing rotating objects of physical significance - a black hole and a rigidly rotating disk of dust - are discussed using a single mathematical framework related to Jacobi's inversion problem. Both solutions can be represented in such a form that they differ in the choice of a complex parameter and a real solution of the axisymmetric Laplace equation only. A recently found family of solutions describing differentially rotating disks of dust fits into the same scheme.
