The dependencies of the melting point and the lattice parameter of supported metal nanoclusters as functions of clusters height are theoretically investigated in the framework of the uniform approach. The vacancy mechanism describing the melting point and the lattice parameter shifts in nanoclusters with decrease of their size is proposed. It is shown that under the high vacuum conditions (p<10^-7 torr) the essential role in clusters melting point and lattice parameter shifts is played by the van der Waals forces of cluster-substrate interation. The proposed model satisfactorily accounts for the experimental data.
Molecular dynamics simulations show that gold clusters with about 600--3000 atoms crystallize into a Mackay icosahedron upon cooling from the liquid. A detailed surface analysis shows that the facets on the surface of the Mackay icosahedral gold clusters soften but do not premelt below the bulk melting temperature. This softening is found to be due to the increasing mobility of vertex and edge atoms with temperature, which leads to inter-layer and intra-layer diffusion, and a shrinkage of the average facet size, so that the average shape of the cluster is nearly spherical at melting.
We present a detailed molecular-dynamics study of the melting, freezing, and coalescence of gold nanoclusters within the framework of the embedded-atom method. Concerning melting, we find the process to first affect the surface (``premelting''), then to proceed inwards. The curve for the melting temperature vs cluster size is found to agree reasonably well with predictions of phenomenological models based on macroscopic concepts, in spite of the fact that the clusters exhibit polymorphism and structural transitions. Upon quenching, we observe a large hysterisis of the transition temperature, c…
Here we show results of first-principles investigations aiming at tuning and controlling the catalytic activity of gold nanoclusters through the design of the underlying support. We show that gold clusters adsorbed on a very thin (2 layers) defect-free MgO film which is itself supported on Mo(100), may serve as model catalysts for the low-barrier oxidation of CO. The origin of the emergent activity of the nanoclusters is a dimensionality crossover of the adsorbed gold clusters, from inactive three-dimensional (3D) optimal structures on thick MgO films, to catalytically active 2D ones for suffi…
We have used density functional perturbation theory to investigate the stiffness of interatomic bonds in small clusters of Si, Sn and Pb. As the number of atoms in a cluster is decreased, there is a marked shortening and stiffening of bonds. The competing factors of fewer but stiffer bonds in clusters result in softer elastic moduli but higher (average) frequencies as size is decreased, with clear signatures of universal scaling relationships. A significant role in understanding trends is played by the coordination number of the bulk structure: the higher this is, the lesser is the relative so…
Low-energy deposition of neutral Pd_N clusters (N=2-7 and 13) on a MgO(001) surface F-center (FC) was studied by spin-density-functional molecular dynamics simulations. The incident clusters are steered by an attractive "funnel" created by the FC, resulting in adsorption of the cluster, with one of its atoms bonded atop of the FC. The deposited Pd_2-Pd_6 clusters retain their gas-phase structures, while for N>6 surface-commensurate isomers are energetically more favorable. Adsorbed clusters with N > 3 are found to remain magnetic at the surface.
Thiolate-protected gold nanoclusters represent atomically well-defined active centers for catalysis with resolved crystal structures, enabling the creation of a homogeneous and defined surface. The correlation of characterization via FT-IR spectroscopy with kinetics studies gives insight into the gold clusters activity and tests their utilization to bridge the gap between organometallic complex-based homogenous catalysis and nanoparticle based heterogeneous catalysis as well as the gap between the bulk crystal structure model catalysis and real-world catalysis.
We construct a simple thermodynamic model to describe the melting of a supported metal nanoparticle with a spherically curved free surface both with and without surface melting. We use the model to investigate the results of recent molecular dynamics simulations, which suggest the melting temperature of a supported metal particle is the same as that of a free spherical particle with the same surface curvature. Our model shows that this is only the case when the contact angles of the supported solid and liquid particles are similar. This is also the case for the temperature at which surface mel…
Photoluminescence study using the 325 nm He-Cd excitation is reported for the Au nanoclusters embedded in SiO2 matrix. Au clusters are grown by ion beam mixing with 100 KeV Ar+ irradiation on Au [40 nm]/SiO2 at various fluences and subsequent annealing at high temperature. The blue bands above ~3 eV match closely with reported values for colloidal Au nanoclusters and supported Au nanoislands. Radiative recombination of sp electrons above Fermi level to occupied d-band holes are assigned for observed luminescence peaks. Peaks at 3.1 eV and 3.4 eV are correlated to energy gaps at the X- and L-sy…
We report the studies of ultrafast electron nanocrystallography on size-selected Au nanoparticles (2-20 nm) supported on a molecular interface. Reversible surface melting, melting, and recrystallization were investigated with dynamical full-profile radial distribution functions determined with sub-picosecond and picometer accuracies. In an ultrafast photoinduced melting, the nanoparticles are driven to a non-equilibrium transformation, characterized by the initial lattice deformations, nonequilibrium electron-phonon coupling, and upon melting, the collective bonding and debonding, transforming…
Electronic Signature of Melting Onset in Polycrystalline Copper at Extreme Conditions
Stanford University（斯坦福大学）；RPTU University Kaiserslautern-Landau（凯泽斯劳滕-兰道理工大学）；SLAC National Accelerator Laboratory（SLAC国家加速器实验室）；Bundeswehr University Munich（德国联邦国防军慕尼黑大学）；University of Warwick（华威大学）
We determine the structure and melting behavior of supported metallic clusters using an ab initio density-functional-based treatment of intracluster interactions and an approximate treatment of the surface as an idealized smooth plane yielding an effective Lennard-Jones interaction with the ions of the cluster. We apply this model to determine the structure of sodium clusters containing from 4 to 22 atoms, treating the cluster-surface interaction strength as a variable parameter. For a strong cluster-surface interaction, the clusters form two-dimensional (2D) monolayer structures; comparisons …
Charge density waves (CDWs) are symmetry-broken ground states that commonly occur in low-dimensional metals due to strong electron-electron and/or electron-phonon coupling. The non-equilibrium carrier distribution established via photodoping with femtosecond laser pulses readily quenches these ground states and induces an ultrafast insulator-to-metal phase transition. To date, CDW melting has been mainly investigated in the single-photon and tunneling regimes, while the intermediate multi-photon regime has received little attention. Here we excite one-dimensional indium wires with a CDW gap of…
Lattice stability and metastability, as well as melting, are important features of the physics and chemistry of dense hydrogen. Using ab initio molecular dynamics (AIMD), the classical superheating limit and melting line of metallic hydrogen are investigated up to 1.5 TPa. The computations show that the classical superheating degree is about 100 K, and the classical melting curve becomes flat at a level of 350 K when beyond 500 GPa. This information allows us to estimate the well depth and the potential barriers that must be overcome when the crystal melts. Inclusion of nuclear quantum effects…
A metastable homogeneous state exists down to zero temperature in systems of repelling objects. Zero ''fluctuation temperature'' liquid state therefore serves as a (pseudo) ''fixed point'' controlling the properties of vortex liquid below and even around melting point. There exists Madelung constant for the liquid in the limit of zero temperature which is higher than that of the solid by an amount approximately equal to the latent heat of melting. This picture is supported by an exactly solvable large $N$ Ginzburg - Landau model in magnetic field. Based on this understanding we apply Borel - P…
The thermal behavior of free and alumina-supported iron-carbon nanoparticles is investigated via molecular dynamics simulations, in which the effect of the substrate is treated with a simple Morse potential fitted to ab initio data. We observe that the presence of the substrate raises the melting temperature of medium and large $Fe_{1-x}C_x$ nanoparticles ($x$ = 0-0.16, $N$ = 80-1000, non- magic numbers) by 40-60 K; it also plays an important role in defining the ground state of smaller Fe nanoparticles ($N$ = 50-80). The main focus of our study is the investigation of Fe-C phase diagrams as a…
Two-dimensional materials supported by single atom catalysis (SACs) are foreseen to replace platinum for large-scale industrial scalability of sustainable hydrogen generation. Here, a series of metal (Al, Sc, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn) and non-metal (B, C, N, O, F, Si, P, S, Cl) single atoms embedded on various active sites of g-C$_3$N$_4$ are screened by DFT calculations and six machine learning (ML) algorithms (support vector regression, gradient boosting regression, random forest regression, AdaBoost regression, multilayer perceptron regression, ridge regression). Our results based on f…
We report on how different cluster deposition regimes can be obtained and observed by in situ Scanning Tunneling Microscopy (STM) by exploiting deposition parameters in a pulsed laser deposition (PLD) process. Tungsten clusters were produced by nanosecond Pulsed Laser Ablation in Ar atmosphere at different pressures and deposited on Au(111) and HOPG surfaces. Deposition regimes including cluster deposition-diffusion-aggregation (DDA), cluster melting and coalescence and cluster implantation were observed, depending on background gas pressure and target-to-substrate distance which influence the…
