纳米结构GaSb的表征:大面积光学和局部直接显微镜技术之间的比较
Characterisation of nanostructured GaSb : Comparison between large-area optical and local direct microscopic techniques
摘要:
低能量离子束溅射的GaSb的结果在自组织的纳米结构,具有结构化的大表面积的潜力。表征这种纳米结构的光学方法进行了研究,并比较直接(本地)显微镜的方法。样品由密集堆积的GaSb锥体体GaSb,约30,50和300 nm的高度,通过溅射法制备。的光学性质进行了研究,通过光谱椭圆偏振法,在0.6-6.5 eV的范围内,和与穆勒矩阵椭圆偏振法在可见光范围内,1.46-2.88 eV。的光学测量进行比较,通过扫描电子显微镜(SEM),高分辨率透射电子显微镜(HR-TEM),和原子力显微镜(AFM)获得的直接形貌测量。当通过梯度各向异性有效介质模型将短锥(<55 nm)的实验光学响应相对于拓扑表面信息进行反演时,两类方法之间实现了良好的一致性。测量的主要拓扑参数是平均锥高,但也获得了典型的锥形状和密度(体积分数)的估计。梯度各向异性有效介质模型将圆锥体视为半径不增加的同心圆柱体(圆盘)的堆叠。光学方法被证明是一个有价值的表征工具,纳米结构的表面,特别是当大的覆盖面积是可取的。由于光学技术的快速和非破坏性的特性,它们可以容易地适应于原位配置。
英文摘要:
Low energy ion-beam sputtering of GaSb results in self-organized nanostructures, with the potential of structuring large surface areas. Characterisation of such nanostructures by optical methods is studied and compared to direct (local) microscopic methods. The samples consist of densely packed GaSb cones on bulk GaSb, approximately 30, 50 and 300 nm in height, prepared by sputtering at normal incidence. The optical properties are studied by spectroscopic ellipsometry, in the range 0.6-6.5 eV, and with Mueller matrix ellipsometry in the visible range, 1.46-2.88 eV. The optical measurements are compared to direct topography measurements obtained by Scanning Electron Microscopy (SEM), High Resolution Transmission Electron Microscopy (HR-TEM), and Atomic Force Microscopy (AFM). Good agreement is achieved between the two classes of methods when the experimental optical response of the short cones (<55 nm) is inverted with respect to topological surface information via a graded anisotropic effective medium model. The main topological parameter measured was the average cone height, but estimates of typical cone shape and density (in terms of volume fractions) were also obtained. The graded anisotropic effective medium model treats the cones as a stack of concentric cylinders (discs) of non-increasing radii. Optical methods are shown to represent a valuable characterization tool for nanostructured surfaces, in particular when large coverage area is desirable. Due to the fast and non-destructive properties of optical techniques, they may readily be adapted to in-situ configurations.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。