包装用开口微波炉
Open Ended Microwave Oven for Packaging
摘要:
提出了一种新颖的开放式波导腔谐振器,用于凸块、底填充物和填充剂的组合变频微波固化,以及用于快速倒装芯片组装、直接芯片附接(DCA)或晶圆级封装(WSLP)的器件对准。该技术实现了微电子、光电子和医疗设备中使用的粘合剂的射频(RF)固化,同时具有潜在的微米级对准精度和设备粘合。原则上,开放式炉腔可以直接安装在倒装芯片或晶圆级键合机上,因此,将允许通过局部加热来键合器件,从而降低对热敏器件的风险。采用多物理场方法对理想聚合物负载的变频微波(VFM)加热和固化进行了数值模拟。采用Yee格式的时域有限差分法(FDTD)求解了一种新型微电子制造用开口微波炉的电磁场。温度分布,固化度和热应力分析使用非结构有限体积法(UFVM)多物理场包。聚合物负载被网格化用于热物理分析,而微波腔-包围聚合物负载-被网格化用于微波辐射。这两个解决方案域使用交叉映射例程链接。论证了在腔体开口端利用渐逝边缘场加热的原理。建立闭环反馈程序,允许控制有损耗样品内的温度。通过使用热成像相机获得有损耗样品内的温度分布。
英文摘要:
A novel open waveguide cavity resonator is presented for the combined variable frequency microwave curing of bumps, underfills and encapsulants, as well as the alignment of devices for fast flip-chip assembly, direct chip attach (DCA) or wafer-scale level packaging (WSLP). This technology achieves radio frequency (RF) curing of adhesives used in microelectronics, optoelectronics and medical devices with potential simultaneous micron-scale alignment accuracy and bonding of devices. In principle, the open oven cavity can be fitted directly onto a flip-chip or wafer scale bonder and, as such, will allow for the bonding of devices through localised heating thus reducing the risk to thermally sensitive devices. Variable frequency microwave (VFM) heating and curing of an idealised polymer load is numerically simulated using a multi-physics approach. Electro-magnetic fields within a novel open ended microwave oven developed for use in micro-electronics manufacturing applications are solved using a de icated Yee scheme finite-difference time-domain (FDTD) solver. Temperature distribution, degree of cure and thermal stresses are analysed using an Unstructured Finite Volume method (UFVM) multi-physics package. The polymer load was meshed for thermophysical analysis, whilst the microwave cavity - encompassing the polymer load - was meshed for microwave irradiation. The two solution domains are linked using a cross-mapping routine. The principle of heating using the evanescent fringing fields within the open-end of the cavity is demonstrated. A closed loop feedback routine is established allowing the temperature within a lossy sample to be controlled. A distribution of the temperature within the lossy sample is obtained by using a thermal imaging camera.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。