arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 0805.0883cs.OH
收藏

便携式无阀蠕动微泵的设计与制作

Portable Valve-less Peristaltic Micro-pump Design and Fabrication

H. Yang, T. -H. Tsai, C. -C. Hu

摘要:

介绍了一种无阀蠕动微泵的设计与制作方法。无阀蠕动微泵由三个串联的膜室组成,由三个压电陶瓷驱动器驱动。通过流体流动设计,流动通道中的液体被泵送至范围为0.4至0.48 mm/s的恒定流速。当外加电压为24V,频率为50 Hz时,微泵的最大流量约为365微升/分。微泵模具的制作采用光刻工艺。采用PDMS模压法和PDMS键合法制作了微通道和致动器腔。设计了一种便携式驱动控制器,用于控制三个压电陶瓷驱动器以适当的顺序驱动腔室膜。然后,将各部分集成到便携式无阀蠕动微泵系统中。

英文摘要:

This paper is to describe a design and fabrication method for a valve-less peristaltic micro-pump. The valve-less peristaltic micro-pump with three membrane chambers in a serial is actuated by three piezoelectric (PZT) actuators. With the fluidic flow design, liquid in the flow channel is pumped to a constant flow speed ranged from 0.4 to 0.48 mm/s. In term of the maximum flow rate of the micro-pump is about 365 mircoliters/min, when the applied voltage is 24V and frequency 50 Hz. Photolithography process was used to fabricate the micro-pump mold. PDMS molding and PDMS bonding method were used to fabricate the micro-channel and actuator chambers. A portable drive controller was designed to control three PZT actuators in a proper sequence to drive the chamber membrane. Then, all parts were integrated into the portable valve-less peristaltic micro-pump system.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑