Exact solutions are obtained for all the modes of wave propagation along an anisotropic cylindrical waveguide. Closed-form expressions for the energy flow on the waveguide are also derived. For extremely anisotropic waveguide where the transverse permittivity is negative while the longitudinal permittivity is positive, only transverse magnetic (TM) and hybrid modes will propagate on the waveguide. At any given frequency the waveguide supports an infinite number of eigenmodes. Among the TM modes, at most only one mode is forward wave. The rest of them are backward waves which can have very large effective index. At a critical radius, the waveguide supports degenerate forward- and backward-wave modes with zero group velocity. These waveguides can be used as phase shifters and filters, and as optical buffers to slow down and trap light.
We show that a rectangular metallic waveguide loaded with metamaterial elements consisting of electric-field coupled (ELC) resonators placed at the side walls can operate well below the cutoff frequency of the respective unloaded waveguide. The dispersion diagrams indicate that propagating modes in ELC-loaded waveguides are of forward-type for both TE and TM modes. We also study the dispersion diagram and transmission characteristics of rectangular metallic waveguides simultaneously loaded with ELCs and split ring resonators (SRRs). Such doubly-loaded waveguides can support both forward wave a…
An infrared perfect absorber based on gold nanowire metamaterial cavities array on a gold ground plane is designed. The metamaterial made of gold nanowires embedded in alumina host exhibits an effective permittivity with strong anisotropy, which supports cavity resonant modes of both electric dipole and magnetic dipole. The impedance of the cavity modes matches the incident plane wave in free space, leading to nearly perfect light absorption. The incident optical energy is efficiently converted into heat so that the local temperature of the absorber will increase. Simulation results show that …
We study perspectives of nanowire metamaterials for negative-refraction waveguides, high-performance polarizers, and polarization-sensitive biosensors. We demonstrate that the behavior of these composites is strongly influenced by the concentration, distribution, and geometry of the nanowires, derive an analytical description of electromagnetism in anisotropic nanowire-based metamaterials, and explore the limitations of our approach via three-dimensional numerical simulations. Finally, we illustrate the developed approach on the examples of nanowire-based high energy-density waveguides and non…
In this paper, we employ the properties of metamaterials to tailor the modes of metamaterial-dielectric waveguides operating at optical frequencies. We survey the effect of fishnet metamaterial structural parameters such as the magnetic oscillation strength, magnetic resonance frequency and magnetic damping on the double-negative refractive index frequency region in metamaterials and on the hybrid-modes in slab metamaterial-dielectric waveguides. To identify the robustness of the metamaterials to fluctuations in the metamaterial structural parameters, we investigate the behavior of metamateria…
Nanoscale slot waveguides of hyperbolic metamaterials are proposed and demonstrated for achieving large optical field enhancement. The dependence of the enhanced electric field within the air slot on waveguide mode coupling and permittivity tensors of hyperbolic metamaterials is analyzed both numerically and analytically. Optical intensity in the metamaterial slot waveguide can be more than 25 times stronger than that in a conventional silicon slot waveguide, due to tight optical mode confinement enabled by the ultrahigh refractive indices supported in hyperbolic metamaterials. The electric fi…
Strongly anisotropic media with hyperbolic dispersion can be used for claddings of plasmonic waveguides. In order to analyze the fundamental properties of such waveguides, we analytically study 1D waveguides arranged of a hyperbolic metamaterial (HMM) in a HMM-Insulator-HMM (HIH) structure. We show that hyperbolic metamaterial claddings give flexibility in designing the properties of HIH waveguides. Our comparative study on 1D plasmonic waveguides reveals that HIH-type waveguides can have a higher performance than MIM or IMI waveguides.
We study the optical force arising when isolated gold nanowire pairs and metamaterials with a gold nanowire pair in the unit cell are illuminated with laser radiation. Firstly, we show that isolated nanowire pairs are subject to much stronger optical forces than nanospheres due to their stronger electric and magnetic dipole resonances. We also investigate the properties of the optical force as a function of the length of the nanowires and of the distance between the nanowires. Secondly, we study the optical force in a metamaterial that consists of a periodic array of nanowire pairs. We show th…
We propose a leaky optical waveguide achieved with a uniaxially anisotropic metamaterial that supports both forward and backward leaky waves. The backward leaky nature is exploited in a sub-diffraction imaging system.
Metamaterial is promising for enhancing the capability of plasmonic devices. We consider a cylindrical waveguide with three-level Λ atoms embedded in the dielectric core. By comparing metal cladding vs metamaterial cladding of a waveguide with Λ atoms in the core, we show that, for a fixed amount of slowing of light due to electromagnetically induced transparency, the metamaterial cladding outperforms in terms of the inherent loss.
We present an analytical description of the nonlocal optical response of plasmonic nanowire metamaterials that enable negative refraction, subwavelength light manipulation, and emission lifetime engineering. We show that dispersion of optical waves propagating in nanowire media results from coupling of transverse and longitudinal electromagnetic modes supported by the composite and derive the nonlocal effective medium approximation for this dispersion. We derive the profiles of electric field across the unit cell, and use these expressions to solve the long-standing problem of additional bound…
We present a detailed study of oscillating modes in a slab waveguide with air core and anisotropic metamaterial cladding. It is shown that, under specific dielectric configurations, slow and even stopped electromagnetic wave can be supported by such an air waveguide. We propose a linearly tapped waveguide structure that could lead the propagating light to a complete standstill. Both the theoretical analysis and the proposed waveguide have been validated by full-wave simulation based on finite-difference time-domain method.
We study the eigenmodes of a slab of a wire metamaterial and demonstrate that such a waveguiding structure supports deep-subwavelength propagating modes exhibiting properties of a single-mode waveguide at any fixed frequency below the plasma frequency of metal wires. We compare our analytical results with the dispersion relations extracted from the experimental measurements.
This paper investigates the propagation characteristics of circular waveguides whose interior surface is coated with a thin metamaterial liner possessing dispersive, negative, and near-zero permittivity. A field analysis of this system produces the dispersion of complex modes, and reveals in detail intriguing phenomena such as backward-wave propagation below the unlined waveguide's fundamental-mode cutoff, resonant tunneling of power, field collimation, and miniaturization. It is shown how the waveguide geometry and metamaterial parameters may be selected to engineer the lined waveguide's spec…
We study metamaterials with an anisotropic effective permittivity tensor in which one component is near zero. We find that such an anisotropic metamaterial can be used to control wave propagation and construct almost perfect bending waveguides with a high transmission rate (>95%). This interesting effect originates in the power flow redistribution by the surface waves on the input and output interfaces, which smoothly matches with the propagating modes inside the metamaterial waveguide. We also find that waves in such anisotropic epsilon-near-zero materials can be reflected by small-sized perf…
Metamaterials, which are materials engineered to possess novel optical properties, have been increasingly studied. The ability to fabricate metamaterials has sparked an interest in determining possible applications. We investigate using a metamaterial for boundary engineering in waveguides. A metamaterial-clad cylindrical waveguide is used to provide confinement for an optical signal, thereby increasing the local electromagnetic energy density. We show that metamaterial-clad waveguides have unique optical properties, including new modes, which we call hybrid modes. These modes have properties …
We demonstrate that metamaterial devices requiring anisotropic dielectric permittivity and magnetic permeability may be emulated by specially designed tapered waveguides. This approach leads to low-loss, broadband performance. Based on this technique, we demonstrate broadband electromagnetic cloaking in the visible frequency range on a scale ~100 times larger than the wavelength.
We propose deep-subwavelength optical waveguides based on metal-dielectric multilayer indefinite metamaterials with ultrahigh effective refractive indices. Waveguide modes with different mode orders are systematically analyzed with numerical simulations based on both metal-dielectric multilayer structures and the effective medium approach. The dependences of waveguide mode indices, propagation lengths and mode areas on different mode orders, free space wavelengths and sizes of waveguide cross sections are studied. Furthermore, waveguide modes are also illustrated with iso-frequency contours in…
Flexible control of the modal confinement in silicon photonic waveguides is an appealing feature for many applications, including sensing and hybrid integration of active materials. In most cases, strip waveguides are the preferred solution to maximize the light interaction with the waveguide surroundings. However, the only two degrees of freedom in Si strip waveguides are the width and thickness, resulting in limited flexibility in evanescent field control. Here, we propose and demonstrate a new strategy that exploits metamaterial engineering of the waveguide core and cladding to control the …
We show that waveguides with a dielectric core and a lossy metamaterial cladding (metamaterial-dielectric guides) can support hybrid ordinary-surface modes previously only known for metal-dielectric waveguides. These hybrid modes are potentially useful for frequency filtering applications as sharp changes in field attenuation occur at tailorable frequencies. Our results also show that the surface modes of a metamaterial-dielectric waveguide with comparable electric and magnetic losses can be less lossy than the surface modes of an analogous metal-dielectric waveguide with electric losses alone…
The fundamental guided electromagnetic dispersion characteristics in lossless dispersive metamaterial clad circular air hole waveguides are investigated. Two operating guided modes are found to exist: circular waveguide and surface plasmon polariton modes that support fast and slow waves, respectively. Hybrid mode classifications are also made in an empirical manner so that the guided modes can be sorted into either TM-like or TE-like modes in terms of their unique dispersion characteristics. Unusual dispersion characteristics, including multi-valued propagation constants at a single frequency…
We derive general coupled-mode equations describing the nonlinear interaction of electromagnetic modes in media with loss and gain. Our approach is rigorously based on the Lorentz reciprocity theorem, and it can be applied to a broad range of metal-dielectric photonic structures, including plasmonic waveguides and metamaterials. We verify that our general results agree with the previous analysis of particular cases, and predict novel effects on self- and cross-phase modulation in multi-layer nonlinear fishnet metamaterials.
Metamaterials are being used to model various exotic "optical spaces" for such applications as novel lenses and cloaking. While most effort is directed towards engineering of continuously changing dielectric permittivity and magnetic permeability tensors, an alternative approach may be based on lattices of metamaterial waveguides. Here we demonstrate the power of the latter technique by presenting metamaterial lattice models of various 4D spaces.
Here we demonstrate that giant transverse optical forces can be generated in nanoscale slot waveguides of hyperbolic metamaterials, with more than two orders of magnitude stronger compared to the force created in conventional silicon slot waveguides, due to the nanoscale optical field enhancement and the extreme optical energy compression within the air slot region. Both numerical simulation and analytical treatment are carried out to study the dependence of the optical forces on the waveguide geometries and the metamaterial permittivity tensors, including the attractive optical forces for the…
This work presents the radiation performance of open-ended circular-waveguide probe antennas that have been miniaturized by the introduction of thin metamaterial liners. The liners introduce an HE$_{11}$ mode well below the natural cutoff frequency, which provides substantial gain improvements over a similarly sized waveguide probe. A new feeding arrangement employing a shielded-loop source embedded inside the miniaturized waveguide is developed to efficiently excite the HE$_{11}$ mode and avoid the excitation of other modes across the frequency reduced band while maintaining the antenna's com…
We reveal that slow-light enhanced optical forces between side-coupled photonic-crystal nanowire waveguides can be flexibly controlled by introducing a relative longitudinal shift. We predict that close to the photonic band-edge, where the group velocity is reduced, the transverse force can be tuned from repulse to attractive, and the force is suppressed for a particular shift value. Additionally the shift leads to symmetry breaking that can facilitate longitudinal forces acting on the waveguides, in contrast to unshifted structures where such forces vanish.
We report on the optical and physical characterization of metallic nanowire (NW) metamaterials fabricated by electrodeposition of ~30 nm diameter gold nanowires in nano-porous anodic aluminum oxide. We observe a uniaxial anisotropic dielectric response for the NW metamaterials that displays both epsilon-near-zero (ENZ) and epsilon-near-pole (ENP) resonances. We show that a fundamental difference in the behavior of NW-metamaterials from metal-dielectric multilayer (ML) metamaterials is the differing directions of the epsilon-near-zero (ENZ) and epsilon-near-pole (ENP) dielectric responses relat…
Anomalous optical coupling properties between two silicon wires in a silicon slot waveguide embedded in epsilon-near-zero (ENZ) metamaterials are proposed and demonstrated. The dependences of optical field enhancement in the slot region and transverse optical force on the slot size and the permittivity of surrounding material are studied in details. It is demonstrated that the optical field in the slot region is significantly enhanced due to the giant index contrast at the slot interface between silicon wires and ENZ metamaterials, but the optical mode coupling between silicon wires is greatly…
In the past few years, many of the fascinating and previously almost unconceivable properties predicted for those novel, artificial, man-made materials, so called metamaterials, were demonstrated to be not only a tangible reality, but a very useful one. However, plenty of the best achievements in that newly discovered field are far from having a direct translation to the, in many aspects more interesting, high frequency range, without being burdened not only by technological difficulties, but also conceptual ones. Of particular importance within the realm of optical metamaterials having a nega…
In this article, a 2D plasmonic waveguide loaded with all dielectric anisotropic metamaterial, consisting of alternative layers of Si-SiO2, has been theoretically proposed and numerically analyzed. Main characteristics of waveguide i.e. propagation constant, propagation length and normalized mode area have been calculated for different values of ridge width and height at telecommunication wavelength. The respective 1D structure of the waveguide has been analytically solved for the anisotropic ridge as a single uniaxial medium with dielectric tensor defined by Effective Medium Theory (EMT). The…
We demonstrate a metamaterial that cannot be described by a single set of refractive-index and impedance values, even for fixed frequency and polarization. The metamaterial structure is a stack of dissimilar waveguides with subwavelength width and spacing, which guide light at different phase velocities. This multi-refractive-index metamaterial (MRIM) can be viewed as a spatial superposition of multiple homogeneous materials. Using full-wave simulations, we demonstrate several optical components based on MRIMs, including prisms that deflect light to multiple angles, lenses with multiple focal …
We demonstrate a method to monolithically integrate nanowire-based quantum dot single photon sources on-chip using evanescent coupling. By deterministically placing an appropriately tapered III-V nanowire waveguide, containing a single quantum dot, on top of a silicon-based ridge waveguide, the quantum dot emission can be transferred to the ridge waveguide with calculated efficiencies close to 100%. As the evanescent coupling is bidirectional, the source can be optically pumped in both free-space and through the ridge waveguide. The latter onfiguration provides a self-contained, all-fiber, sin…
We study optical waveguides that include layers of materials and metamaterials with hyperbolic dispersion (HMM). We consider long-range regime at the dielectric-HMM interface in different waveguide geometries (single interface or symmetric cladding with different layers). In contrast to the traditional analysis of geometrical parameters, we make emphasis on optical properties of constituent materials, and by solving dispersion equations, analyze how dielectric and HMM permittivities affect propagation length and mode size. We derive a figure of merits that should be used for each waveguide in …
We analyze spectrum of waveguide modes of an arbitrary uniaxial anisotropic metamaterial slab with non-local electromagnetic response whose permittivity tensor could be described within Drude approximation. Spatial dispersion was introduced within the hydrodynamical model. Both anisotropy and spatial dispersion were considered as perturbations. This helps to distinguish their effect on the spectrum of the slab and to analyze lifting of the degeneracy of eigenmodes at plasma frequency in detail. Spatial dispersion is shown to result in break of the singularity in the den- sity of optical states…
This paper presents experimental verification of below-cutoff transmission through miniaturized waveguides whose interior is coated with a thin anisotropic metamaterial liner possessing epsilon-negative and near-zero (ENNZ) properties. These liners are realized using a simple, printed-circuit implementation based on inductively loaded wires, and introduce an HE$_{11}$ mode well below the natural cutoff frequency. The inclusion of the liner is shown to substantially improve the transmission between two embedded shielded-loop sources. A homogenization scheme is developed to characterize the line…
We propose and demonstrate subwavelength grating (SWG) metamaterial waveguides and ring resonators on a silicon nitride platform for the first time. The SWG waveguide is engineered such that a large overlap of 53% of the Bloch mode with the top cladding material is achieved, demonstrating excellent potential for applications in evanescent field sensing and light amplification. The devices, which have critical dimensions greater than 100 nm, are fabricated using a commercial rapid turn-around silicon nitride prototyping foundry process using electron beam lithography. Experimental characterizat…
The reflectivity of various Bragg reflectors in connection to waveguide structures, including nanowires, has been investigated using modal reflection and transmission matrices. A semi-analytical model was applied yielding increased understanding of the diffraction effects present in such gratings. Planar waveguides and nanowire lasers are considered in particular. Two geometries are compared; Bragg reflectors within the waveguides are shown to have significant advantages compared to Bragg reflectors in the substrate, when diffraction effects are significant.
The realization of a semiconductor near-unity absorber in the infrared will provide new capabilities to transform applications in sensing, health, imaging, and quantum information science, especially where portability is required. Typically, commercially available portable single-photon detectors in the infrared are made from bulk semiconductors and have efficiencies well below unity. Here, we design a novel semiconductor nanowire metamaterial, and show that by carefully arranging an InGaAs nanowire array and by controlling their shape, we demonstrate near-unity absorption efficiency at room t…
We present a comprehensive study of dispersion-engineered nanowire photonic crystal waveguides suitable for experiments in quantum optics and atomic physics with optically trapped atoms. Detailed design methodology and specifications are provided, as are the processing steps used to create silicon nitride waveguides of low optical loss in the near-IR. Measurements of the waveguide optical properties and power-handling capability are also presented.
We report on the site-selected growth of bright single InAsP quantum dots embedded within InP photonic nanowire waveguides emitting at telecom wavelengths. We demonstrate a dramatic dependence of the emission rate on both the emission wavelength and the nanowire diameter. With an appropriately designed waveguide, tailored to the emission wavelength of the dot, an increase in count rate by nearly two orders of magnitude (0.4kcps to 35kcps) is obtained for quantum dots emitting in the telecom O-band. Using emission-wavelength-optimised waveguides, we demonstrate bright, narrow linewidth emission…
Here we demonstrate that photons launched into a specially designed metamaterial waveguide act as massive quasi-particles, which experience strong acceleration. Laser light propagating through such a waveguide may be used as a thermometer which would measure the Unruh temperature. Moreover, the metamaterial waveguide design may be approximated by a tapered optical waveguide.
We demonstrate enhanced four-wave mixing (FWM) in doped silica waveguides integrated with graphene oxide (GO) layers. Owing to strong mode overlap between the integrated waveguides and GO films that have a high Kerr nonlinearity and low loss, the FWM efficiency of the hybrid integrated waveguides is significantly improved. We perform FWM measurements for different pump powers, wavelength detuning, GO coating lengths, and number of GO layers. Our experimental results show good agreement with theory, achieving up to ~9.5-dB enhancement in the FWM conversion efficiency for a 1.5-cm-long waveguide…
In this work we investigate the nonperturbative decay dynamics of a quantum emitter coupled to a composite right/left handed transmission line (CRLH-TL). Our theory captures the contributions from the different spectral features of the waveguide, providing an accurate prediction beyond the weak coupling regime, and illustrating the multiple possibilities offered by the nontrivial dispersion of metamaterial waveguides. We show that the waveguide is characterized by a band-gap with two asymmetric edges: (i) a mu-near-zero (MNZ) band edge, where spontaneous emission is inhibited and an unstable p…
Next-generation optoelectronic devices and photonic circuitry will have to incorporate on-chip compatible nanolaser sources. Semiconductor nanowire lasers have emerged as strong candidates for integrated systems with applications ranging from ultrasensitive sensing, to data communication technologies. Despite significant advances in their fundamental aspects, the integration within scalable photonic circuitry remains challenging. Here we report on the realization of hybrid photonic devices consisting of nanowire lasers integrated with wafer-scale lithographically designed V-groove plasmonic wa…
Loss is a crucial problem in plasmonic integrated optical circuits and metamaterials. The Er, Yb codoped gain material is introduced into a magnetic plasmon waveguide composed of a chain of nanosandwiches in order to solve the loss problem in such subwavelength waveguide. The magnetic plasmon mode and a higher order mode are chosen as the signal and pump light to enhance the radiation and pump efficiencies. The signal light propagating in the waveguide is investigated with different Er3+ doping concentration and signal decay time. It is shown that the gain effect can not only compensate the lo…
Morphology and performance are conjointed attributes of metamaterials, of which sculptured thin films (STFs) are examples. STFs are assemblies of nanowires that can be fabricated from many different materials, typically via physical vapor deposition onto rotating substrates. The curvilinear--nanowire morphology of STFs is determined by the substrate motions during fabrication. The optical properties, especially, can be tailored by varying the morphology of STFs. In many cases prototype devices have been fabricated for various optical, thermal, chemical, and biological applications.
The ability to exploit the on-chip nonlinear generation of new frequencies has opened the door to a plethora of applications in fundamental and applied physics. Excitation of dispersive waves is a particularly interesting process that allows efficient nonlinear wavelength conversion by phase-matching of a soliton and waves in the normal dispersion regime. However, controlling the wavelength of dispersive waves in integrated waveguides remains an open challenge, hampering versatile shaping of the nonlinear spectral response. Here, we show that metamaterial silicon waveguides release new degrees…
We demonstrate waveguide-integrated superconducting nanowire single-photon detectors on thin-film lithium niobate (LN). Using a 250 um-long NbN superconducting nanowire lithographically defined on top of a 125 um-long LN nanowaveguide, on-chip detection efficiency of 46% is realized with simultaneous high performance in dark count rate and timing jitter. As LN possesses high second-order nonlinear \c{hi}(2) and electro-optic properties, an efficient single-photon detector on thin-film LN opens up the possibility to construct small scale fully-integrated quantum photonic chip which includes sin…
The polarization controlled optical signal routing has many important applications in photonics such as polarization beam splitter. By using two-dimensional transmission lines with lumped elements, we experimentally demonstrate the selective excitation of guided modes in waveguides composed of two kinds of single-negative metamaterials. A localized, circularly polarized emitter placed near the interface of the two kinds of single-negative metamaterials only couples with one guided mode with a specific propagating direction determined by the polarization handedness of the source. Moreover, this…
Electromagnetic waves impinging on three-dimensional helical metallic metamaterials have been shown to exhibit chiral effects of large magnitude both theoretically and in experimental realizations. Chirality here describes different responses of scatterers, materials, or metamaterials to left and right circularly polarized electromagnetic waves. These differences can be quantified in terms of electromagnetic chirality measures. In this work we consider the optimal design of thin metallic free-form nanowires that possess measures of electromagnetic chirality as large as fundamentally possible. …
We study the main nonlinear solutions of plasmonic slot waveguides made from an anisotropic metamaterial core with a positive Kerr-type nonlinearity surrounded by two semi-infinite metal regions. First, we demonstrate that for a highly anisotropic diagonal elliptical core, the bifurcation threshold of the asymmetric mode is reduced from GW/m threshold for the isotropic case to 50 MW/m one indicating a strong enhancement of the spatial nonlinear effects, and that the slope of the dispersion curve of the asymmetric mode stays positive, at least near the bifurcation, suggesting a stable mode. Sec…
Chemical synthesized silver nanowires have been proved to be the efficient architecture for Plasmonic waveguides, but the high propagation loss prevents their widely applications. Here, we demonstrate that the propagation distance of the plasmons along the Ag NW can be extended if the Ag NW was placed on a dielectric multilayer substrate containing a photonic band gap, but not placed on a commonly used glass substrate. The propagation distance at 630 nm wavelength can reach 16 um even that the Ag NW is as thin as 90 nm in diameter. Experimental and simulation results further show that the pola…
Nonlinear wave mixing in mesoscopic silicon structures is a fundamental nonlinear process with broad impact and applications. Silicon nanowire waveguides, in particular, have large third-order Kerr nonlinearity, enabling salient and abundant four-wave-mixing dynamics and functionalities. Besides the Kerr effect, in silicon waveguides two-photon absorption generates high free-carrier densities, with corresponding fifth-order nonlinearity in the forms of free-carrier dispersion and free-carrier absorption. However, whether these fifth-order free-carrier nonlinear effects can lead to six-wave-mix…
We demonstrate the integration of amorphous tungsten silicide superconducting nanowire single-photon detectors on titanium in-diffused lithium niobate waveguides. We show proof-of-principle detection of evanescently-coupled photons of 1550nm wavelength using bidirectional waveguide coupling for two orthogonal polarization directions. We investigate the internal detection efficiency as well as detector absorption using coupling-independent characterization measurements. Furthermore, we describe strategies to improve the yield and efficiency of these devices.
Internal physical structure can drastically modify the properties of waveguides: photonic crystal fibers are able to confine light inside a hollow air core by Bragg scattering from a periodic array of holes, while metamaterial loaded waveguides for microwaves can support propagation at frequencies well below cutoff. Anisotropic metamaterials assembled into cylindrically symmetric geometries constitute light-guiding structures that support new kinds of exotic modes. A microtube of anodized nanoporous alumina, with nanopores radially emanating from the inner wall to the outer surface, is a manif…
The Unruh effect is the prediction that an accelerating object perceives its surroundings as a bath of thermal radiation even if it accelerates in vacuum. The Unruh effect is believed to be very difficult to observe in the experiment, since an observer accelerating at g=9.8 m/s2 should see vacuum temperature of only 4x10^-20 K. Here we demonstrate that photons in metamaterial waveguides may behave as massive quasi-particles accelerating at up to 10^24 g, which is about twelve orders of magnitude larger than the surface acceleration near a stellar black hole. These record high accelerations may…
