Invariant transformation for quantum mechanical systems is proposed. A cloaking of matter wave can be realized at given energy by designing the potential and effective mass of the matter waves in the cloaking region. The general conditions required for such a cloaking are determined and confirmed by both the wave and particle (classical) approaches. We show that it may be possible to construct such a cloaking system for cold atoms using optical lattices.
Transformation optics is a design tool that connects geometry of space and propagation of light. Invisibility cloaking is a corresponding benchmark example. Recent experiments at optical frequencies have demonstrated cloaking for the light amplitude ("ray cloaking"). In this Letter, we demonstrate far-field cloaking of the light phase ("wave cloaking") by interferometric microscope-imaging experiments on the previously introduced three-dimensional carpet cloak at 700-nm wavelength and for arbitrary polarization of light.
In this work we theoretically propose scattering cancellation-based cloaks for heat waves that obey the Maxwell-Cattaneo equation. The proposed cloaks possess carefully tailored diffusivity to cancel the dipole scattering from the object that they surround, and thus can render a small object invisible in the near and far fields, as demonstrated by full-wave finite-element simulations. Mantle heat cloaking is further analyzed and proposed to simplify the design and bring this cloaking technology one step closer to its practical implementation, with promising applications in nanoelectronics and …
We theoretically propose a temporal cloaking scheme based on accelerating wave packets. A part of a monochromatic lightwave is endowed with a discontinuous nonlinear frequency chirp, so that two opposite accelerating caustics are created in space-time as the different frequency components propagate in the presence of dispersion. The light intensity in the interior of this biconvex time gap is negligible, thus concealing the enclosed events. In contrast to previous temporal cloaking schemes, where light propagates successively through two different media with opposite dispersions, accelerating …
Non-Euclidean geometry combined with transformation optics has recently led to the proposal of an invisibility cloak that avoids optical singularities and therefore can work, in principle, in a broad band of the spectrum [U. Leonhardt and T. Tyc, Science 323, 110 (2009)]. Such a cloak is perfect in the limit of geometrical optics, but not in wave optics. Here we analyze, both analytically and numerically, full wave propagation in non-Euclidean cloaking. We show that the cloaking device performs remarkably well even in a regime beyond geometrical optics where the device is comparable in size wi…
Based on a coordinate transformation approach, Pendry {\it et al.} have reported electromagnetically anisotropic and inhomogeneous shells that, in theory, completely shield an interior structure of arbitrary size from electromagnetic fields without perturbing the external fields. We report full-wave simulations of the cylindrical version of this cloaking structure using ideal and nonideal (but physically realizable) electromagnetic parameters in an effort to understand the challenges of realizing such a structure in practice. The simulations indicate that the performance of the electromagnetic…
Cloaking is typically reciprocal. We introduce here the concept of \emph{transmittable nonreciprocal cloaking} whereby the cloaking system operates as a standard omnidirectional cloak for external illumination, but can transmit light from its center outwards at will. We demonstrate a specific implementation of such cloaking that consists in a set of concentric bianisotropic metasurfaces whose innermost element is nonreciprocal and designed to simultaneously block inward waves and pass -- either omnidirectionaly or directionally -- outward waves. Such cloaking represents a fundamental diversifi…
Artificially structured metamaterials have enabled unprecedented flexibility in manipulating electromagnetic waves and producing new functionalities, including the cloak of invisibility based on coordinate transformation. Here we present the design of a non-magnetic cloak operating at optical frequencies. The principle and structure of the proposed cylindrical cloak are analyzed, and the general recipe for the implementation of such a device is provided. The cloaking performance is verified using full-wave finite-element simulations.
In a recent Letter, Cummer et al. give a description of material parameters for acoustic wave propagation giving rise to a 3D spherical cloak, and verify the cloaking phenomenon on the level of scattering coefficients. A similar configuration has been given by Chen and Chan. In this Comment, we show that these theoretical constructions follow directly from our earlier work http://arxiv.org/abs/math/0611185 on full wave analysis of cloaking for the Helmholtz equation with respect to Riemannian metrics. Furthermore, the analysis there covers the case of acoustically radiating objects being enclo…
Electromagnetic cloaks are devices that can be used to reduce the total scattering cross section of various objects. An ideal cloak removes all scattering from an object and thus makes this object "invisible" to the electromagnetic fields that impinge on the object. However, ideal cloaking appears to be possible only at a single frequency. To study cloaking from an electromagnetic pulse we consider propagation of a pulse inside a waveguide with a cloaked metal object inside. There are several ways to achieve cloaking and in this paper we study three such methods, namely, the coordinate-transfo…
We analyze, both analytically and numerically, the effectiveness of cloaking an infinite cylinder from observations by electromagnetic waves in three dimensions. We show that, as truncated approximations of the ideal permittivity and permeability tensors tend towards the singular ideal cloaking fields, so that the anisotropy ratio tends to infinity, the $D$ and $B$ fields blow up near the cloaking surface. We also consider cloaking with and without the SHS (soft-and-hard surface) lining. We demonstrate numerically that cloaking is significantly improved by the SHS lining, with both the far fie…
It is generally believed that transformation optics based cloaking, besides rendering the cloaked region invisible to detection by scattering of incident waves, also shields the region from those same waves. We demonstrate a coupling between the cloaked and uncloaked regions, exposing a difference between cloaking for rays and waves. Interior resonances allow this coupling to be amplified, and careful choice of parameters leads to effective cloaks with degraded shielding. As one application, we describe how to use transformation optics to hide sensors in the cloaked region and yet enable the s…
The advent of transformation optics has lead to the initiation of designing devices and applications associated to electromagnetic wave propagation in anisotropic media. Here, a method is suggested using a coordinate transformation with spherical coordinates for the purpose of designing a three dimensional cloak for a body having an arbitrary convex geometry. For the purpose of verification of the algorithm, a ray tracing process is carried out for an ellipsoid having axial symmetry.
Acoustic cloaking for the suppression of backscattering inside ducts is proposed in the audible range where plane waves are curved around the object using the surface modes of the liner. It is numerically shown that a slowly varying resonant liner (e. g. based on an array of tubes) creates a zone of silence in which an object of arbitrary shape can be acoustically hidden for a wide range of frequencies. And then, a resonant liner has deflecting properties without reflection of the wavefront, which are close to an ideal invisibility cloak. This kind of cloaking is effective in a wide frequency …
There is currently a great deal of interest in the theoretical and practical possibility of cloaking objects from the observation by electromagnetic waves. The basic idea of these invisibility devices \cite{glu1, glu2, le},\cite{pss1} is to use anisotropic {\it transformation media} whose permittivity and permeability $\var^{λν}, μ^{λν}$, are obtained from the ones, $\var_0^{λν}, μ^{λν}_0$, of isotropic media, by singular transformations of coordinates. In this paper we study electromagnetic cloaking in the time-domain using the formalism of time-dependent scattering theory. This formalism all…
We describe families of potentials which act as approximate cloaks for matter waves, i.e., for solutions of the time-independent Schrödinger equation at energy $E$, with applications to the design of ion traps. These are derived from perfect cloaks for the conductivity and Helmholtz equations, by a procedure we refer to as isotropic transformation optics. If $W$ is a potential which is surrounded by a sequence $\{V_n^E\}_{n=1}^\infty$ of approximate cloaks, then for generic $E$, asymptotically in $n$ (i) $W$ is both undetectable and unaltered by matter waves originating externally to the cloak…
In this manuscript, we demonstrate the design and experimental proof of an optical cloaking structure which multi-directionally conceals a perfectly electric conductor (PEC) object from an incident plane wave. The dielectric modulation around the highly reflective scattering PEC object is determined by an optimization process for multi-directional cloaking purposes. And to obtain the multi-directional effect of the cloaking structure, an optimized slice is mirror symmetrized through a radial perimeter. Three-dimensional (3D) finite-difference time-domain method is integrated with genetic optim…
There has recently been considerable interest in the possibility, both theoretical and practical, of invisibility (or "cloaking") from observation by electromagnetic (EM) waves. Here, we prove invisibility, with respect to solutions of the Helmholtz and Maxwell's equations, for several constructions of cloaking devices. Previous results have either been on the level of ray tracing [Le,PSS] or at zero frequency [GLU2,GLU3], but recent numerical [CPSSP] and experimental [SMJCPSS] work has provided evidence for invisibility at frequency $k\ne 0$. We give two basic constructions for cloaking a reg…
Transformation optics constructions have allowed the design of electromagnetic, acoustic and quantum parameters that steer waves around a region without penetrating it, so that the region is hidden from external observations. The material parameters are anisotropic, and singular at the interface between the cloaked and uncloaked regions, making physical realization a challenge. We address this problem by showing how to construct {\sl isotropic and nonsingular} parameters that give {\sl approximate} cloaking to any desired degree of accuracy for electrostatic, acoustic and quantum waves. The te…
Coordinate-transformation cloaking is based on the design of a metamaterial shell made of an anisotropic, spatially inhomogeneous "transformation medium" that allows rerouting the impinging wave around a given region of space. In its original version, it is generally believed that, in the ideal limit, the radiation cannot penetrate the cloaking shell (from outside to inside, and viceversa). However, it was recently shown by Chen et al. that electromagnetic fields may actually penetrate the cloaked region, provided that this region contains double-negative transformation media which, via proper…
The onset of transformation optics has opened avenues for designing of a plenitude of applications related to propagation of electromagnetic waves in anisotropic media. In this paper, an algorithm is proposed using a coordinate transformation and a piecewise function for the purpose of designing a three dimensional cloak having an arbitrary geometry which could be convex or non-convex in nature. The surfaces of the cloak as well as of the body under consideration are assumed to be conformal to each other. For an arbitrary geometry, the coordinate system needed to model the surface can be a non…
We introduce the concept of furtive quantum sensing, demonstrating the possibility of concealing quantum objects from matter-waves, while maintaining their ability to interact and get excited by the impinging particles. This is obtained by cloaking, with tailored homogeneous metamaterial layers, quantum systems having internal degrees of freedom. The effect is a low-observable quantum sensor with drastically reduced elastic scattering and optimized absorption levels, a concept that opens interesting venues in particle detection, high-efficiency electrical pumping and quantum supercomputing.
We show that the optical properties of an oblique layered system with two kinds of isotropic materials can be described using the concept of transformation media as long as the thickness of the layers is much smaller than the wavelength. Once the connection with transformation media is established, we then show that oblique layered system can serve as a universal element to build a variety of interesting functional optical components such as wave splitters, wave combiners, one-dimensional cloaking devices and reflectionless field rotators.
An inverse way to define the parameters of ideal cylindrical cloaks is developed, in which the interconnection between the parameters is revealed for the first time without knowing a specific coordinate transformation. The required parameters are derived in terms of the integral form of cloaking generators, which is very general and allows us to examine the significance of the parametric profiles. The validity of such inverse way and the invisibility characteristics are presented in full-wave numerical simulation of plane wave scattering by cloaked cylinders.
Metamaterials are artificially structured media that can focus (lensing) or reroute (cloaking) waves, and typically this is developed for electromagnetic waves at millimetric down to nanometric scales or for acoustics or thin elastic plates at centimeter scales. Extending the concepts of Kadic et al. 2013 we show that the underlying ideas are generic across wave systems and scales by generalizing these concepts to seismic waves at frequencies, and lengthscales of the order of hundreds of meters, relevant to civil engineering. By applying ideas from transformation optics we can manipulate and s…
As a probe to explore the ability of invisibility cloaks to conceal objects in the quantum mechanics domain, we study the spontaneous emission rate of an excited two-level atom in the vicinity of an ideal invisibility cloaking. On this base, first, a canonical quantization scheme is presented for the electromagnetic field interacting with atomic systems in an anisotropic, inhomogeneous and absorbing magnetodielectric medium which can suitably be used for studying the influence of arbitrary invisibility cloak on the atomic radiative properties. The time dependence of the atomic subsystem is obt…
The application of transformation optics to the development of intriguing electromagnetic devices can produce weakly anisotropic or isotropic media with the assistance of quasi-conformal and/or conformal mapping, as opposed to the strongly anisotropic media produced by general mappings; however, it is typically limited to two-dimensional applications. By addressing the conformal mapping between two manifolds embedded in three-dimensional space, we demonstrate that electromagnetic surface waves can be controlled without introducing singularity and anisotropy into the device parameters. Using fr…
An analytical method of electromagnetic wave interactions with a general radially anisotropic cloak is established. It is able to deal with arbitrary parameters ($ε_r(r)$, $μ_r(r)$, $ε_t(r)$ and $μ_t(r)$) of a radially anisotropic inhomogeneous shell. The general cloaking condition is proposed from the wave relations for the first time. We derive the parameters of a novel class of spherical nonlinear cloaks and examine its invisibility performance by the proposed method at various nonlinear situations. Spherical metamaterial cloaks with improved invisibility performance is achieved with optima…
We consider how transformation optics and invisibility cloaking can be used to construct models in subsets $\mathbb{R}^3$ with a varying metric, where the time-harmonic waves for a given angular wavenumber $k$, are equivalent to the waves in some closed orientable manifold. The obtained models could in principle be physically implemented using a device built from metamaterials. In particular the measurements in the metamaterial device given by the Helmholtz source-to-solution operator are equivalent to Helmholtz source-to-solution measurements in a universe given by $(\mathbb{R}_+\times M, -dt…
