Track reconstruction in the emulsion-lead target of the OPERA experiment using the ESS microscope
L. Arrabito, C. Bozza, S. Buontempo, L. Consiglio, M. Cozzi, N. D'Ambrosio, G. De Lellis, M. De Serio, F. Di Capua, D. Di Ferdinando, N. Di Marco, A. Ereditato,… 展开作者
L. Arrabito, C. Bozza, S. Buontempo, L. Consiglio, M. Cozzi, N. D'Ambrosio, G. De Lellis, M. De Serio, F. Di Capua, D. Di Ferdinando, N. Di Marco, A. Ereditato, L. S. Esposito, R. A. Fini, G. Giacomelli, M. Giorgini, G. Grella, M. Ieva, J. Janicsko Csathy, F. Juget, I. Kreslo, I. Laktineh, K. Manai, G. Mandrioli, A. Marotta, P. Migliozzi, P. Monacelli, U. Moser, M. T. Muciaccia, A. Pastore, L. Patrizii, Y. Petukhov, C. Pistillo, M. Pozzato, G. Romano, G. Rosa, A. Russo, N. Savvinov, A. Schembri, L. Scotto Lavina, S. Simone, M. Sioli, C. Sirignano, G. Sirri, P. Strolin, V. Tioukov, T. Waelchli
The OPERA experiment, designed to conclusively prove the existence of $\rm ν_μ\to ν_τ$ oscillations in the atmospheric sector, makes use of a massive lead-nuclear emulsion target to observe the appearance of $\rm ν_τ$'s in the CNGS $\rm ν_μ$ beam. The location and analysis of the neutrino interactions in quasi real-time required the development of fast computer-controlled microscopes able to reconstruct particle tracks with sub-micron precision and high efficiency at a speed of 20 cm^2 / h. This paper describes the performance in particle track reconstruction of the European Scanning System, a novel automatic microscope for the measurement of emulsion films developed for OPERA.
The use of nuclear emulsions to record tracks of charged particles with an accuracy of better than 1 micron is possible in large physics experiments thanks to the recent improvements in the industrial production of emulsions and to the development of fast automated microscopes. The European Scanning System (ESS) is a fast automatic system developed for the mass scanning of the emulsions of the OPERA experiment, which requires microscopes with scanning speeds of about 20 cm$^2$/h. Recent improvements in the technique and measurements with ESS are reported.
The possibility of a three-dimensional visualisation/reconstruction of tracks in nuclear emulsion films using X-ray imaging is described in this paper. The feasibility of the technique is established with experimental results.
The OPERA neutrino oscillation experiment is based on the use of the Emulsion Cloud Chamber (ECC). In the OPERA ECC, nuclear emulsion films acting as very high precision tracking detectors are interleaved with lead plates providing a massive target for neutrino interactions. We report on studies related to the effects occurring from the contact between emulsion and lead. A low radioactivity lead is required in order to minimize the number of background tracks in emulsions and to achieve the required performance in the reconstruction of neutrino events. It was observed that adding other chemica…
The use of nuclear emulsions in very large physics experiments is now possible thanks to the recent improvements in the industrial production of emulsions and to the development of fast automated microscopes. In this paper the hardware performances of the European Scanning System (ESS) are described. The ESS is a very fast automatic system developed for the mass scanning of the emulsions of the OPERA experiment, which requires microscopes with scanning speeds of about 20 cm^2/h in an emulsion volume of 44 micron thickness.
New methods for efficient and unambiguous interconnection between electronic counters and target units based on nuclear photographic emulsion films have been developed. The application to the OPERA experiment, that aims at detecting oscillations between mu neutrino and tau neutrino in the CNGS neutrino beam, is reported in this paper. In order to reduce background due to latent tracks collected before installation in the detector, on-site large-scale treatments of the emulsions ("refreshing") have been applied. Changeable Sheet (CSd) packages, each made of a doublet of emulsion films, have bee…
A new method of momentum measurement of charged particles through Multiple Coulomb Scattering (MCS) in the OPERA lead emulsion target is presented. It is based on precise measurements of track angular deviations performed thanks to the very high resolution of nuclear emulsions. The algorithm has been tested with Monte Carlo (MC) pions. The results are found to describe within the expected uncertainties the data obtained from test beams. We also report a comparison of muon momenta evaluated through MCS in the OPERA lead emulsion target with those determined by the electronic detectors for neutr…
The OPERA experiment aims at measuring the ν_μ -> ν_τ oscillation through the ν_τ appearance in an almost pure ν_μ beam (CNGS). For the direct identification of the short-lived τ lepton, produced in ν_τ CC interactions, a micrometric detection resolution is needed. Therefore the OPERA detector makes use of nuclear emulsion films, the highest spatial resolution tracking device, combined with lead plates in an emulsion cloud chamber (ECC) structure called 'brick'. In this paper the nuclear emulsion analysis chain is reported; the strategy and the algorithms set up will be described together with…
The use of emulsions as particles detector has a long and successful life. The recent development of fast automatized analysis systems has allowed the use of huge amount of emulsions films with no precedence in the history of particle physics. The OPERA experiment, running in the underground Laboratori Nazionali del Gran Sasso (LNGS), for the confirmation of the neutrino oscillation in the $ν_μ\toν_{tau}$ channel, is "the major" of these experiments. The experimental technique, the strategy and the first results of the experiment are presented.
Recently essential efforts were made to improve measurement routine with X-ray films exposed in the X-ray emulsion chambers at the Pamirs. Analysis of X-ray emulsion response upon recorded events show that gamma-family energy and intensity in early publications were over estimated. The main physical results of the new analysis are presented.
Automatic nuclear emulsion readout systems have seen remarkable progress since the original idea was developed almost 40 years ago. After the success of its full application to a large-scale neutrino experiment, OPERA, a much faster readout system, the hyper-track selector (HTS), has been developed. HTS, which has an extremely wide-field objective lens, reached a scanning speed of 4700 cm$^2$/h, which is nearly 100 times faster than the previous system and therefore strongly promotes many new experimental projects. We will describe the concept, specifications, system structure, and achieved pe…
We describe the first ever implementation of an emulsion multi-stage shifter in an accelerator neutrino experiment. The system was installed in the neutrino monitor building in J-PARC as a part of a test experiment T60 and stable operation was maintained for a total of 126.6 days. By applying time information to emulsion films, various results were obtained. Time resolutions of 5.3 to 14.7 s were evaluated in an operation spanning 46.9 days (time resolved numbers of 3.8--1.4$\times10^{5}$). By using timing and spatial information, a reconstruction of coincident events that consisted of high mu…
A nuclear emulsion film is a three-dimensional tracking device that is widely used in cosmic-ray and high energy physics experiments. Scanning with a wide angle acceptance is crucial for obtaining track information in emulsion films. This study presents a new method developed for wide angle acceptance and high-speed track recognition of nuclear emulsion films for neutrino-nucleus interaction measurements. The nuclear emulsion technique can be used to measure tracks of charged particles from neutrino interactions with a low momentum threshold. The detection of the particles with a wide angle ac…
We previously developed an automatic track scanning system which enables the detection of large-angle nuclear fragments in the nuclear emulsion films of the OPERA experiment. As a next step, we have investigated this system's track recognition capability for large-angle minimum ionizing particles $(1.0 \leq |tan θ| \leq 3.5)$. This paper shows that, for such tracks, the system has a detection efficiency of 95$\%$ or higher and reports the achieved angular accuracy of the automatically recognized tracks. This technology is of general purpose and will likely contribute not only to various analys…
Precise measurement of neutrino-nucleus interactions with an accelerator neutrino beam is highly important for current and future neutrino oscillation experiments. To measure muon-neutrino charged-current interactions with nuclear-emulsion-based hybrid detector, muon track matching among the detectors are essential. We describe the design and performance of a newly developed scintillation tracker for the muon track matching in the neutrino-nucleus interaction measurement with nuclear emulsion detectors. The muon tracks are reconstructed using the scintillation tracker and another detector call…
SHIP is a new general purpose fixed target facility, proposed at the CERN SPS accelerator. In five years, $2\times 10^{20}$ protons of 400 GeV/c momentum will be dumped on a Molybdenum target. A detector downstream of the target will allow a search to made for long-lived particles with masses below O(10) GeV/c$^2$ foreseen in several extensions of the Standard Model. Another dedicated detector will allow the study of active neutrino cross-sections and angular distributions. The neutrino detector consists of an emulsion target, based on the Emulsion Cloud Chamber technology fruitfully employed …
Topological and kinematical characteristics of hadron interactions have been studied using a lead-emulsion target exposed to 2, 4 and 10 GeV/c hadron beams. A total length of 60 m $π^-$ tracks was followed using a high speed automated emulsion scanning system. A total of 318 hadron interaction vertices and their secondary charged particle tracks were reconstructed. Measurement results of interaction lengths, charged particle multiplicity, emission angles and momenta of secondary charged particles are compared with a Monte Carlo simulation and appear to be consistent. Nuclear fragments emitted …
The OPERA experiment was designed to observe ${ν_μ}$ ${\rightarrow}$ ${ν_τ}$ oscillations through ${ν_τ}$ appearance at a baseline of 730 km in the CNGS beam. Newly developed emulsion analysis technology allows to measure ${ν_e}$, ${ν_μ}$ and ${ν_τ}$ interactions with the largest emulsion detector ever made. OPERA has detected five ${ν_τ}$ candidates, allowing to reject the background-only hypothesis at 5.1 $σ$. The parameters for standard and non-standard oscillations are measured and constrained.
Nuclear emulsion, a tracking detector with sub-micron position resolution, has played a successful role in the field of particle physics and the analysis speed has been substantially improved by the development of automated scanning systems. This paper describes a newly developed automated scanning system and its application to the analysis of nuclear fragments emitted almost isotropically in nuclear evaporation. This system is able to recognize tracks of nuclear fragments up to |tanθ|< 3.0 (where θ is the track angle with respect to the perpendicular to the emulsion film), while existing syst…
The physics motivations and the detector design of the long baseline OPERA experiment are discussed; OPERA is a hybrid detector made of several types of electronic subdetectors, 2 magnets and lead/nuclear emulsions ``brick'' walls. It is located in the Gran Sasso underground lab, 732 km from CERN, on the CNGS neutrino beam. A summary of the performances and of the physics plans are presented.
The main task of the Target Tracker detector of the long baseline neutrino oscillation OPERA experiment is to locate in which of the target elementary constituents, the lead/emulsion bricks, the neutrino interactions have occurred and also to give calorimetric information about each event. The technology used consists in walls of two planes of plastic scintillator strips, one per transverse direction. Wavelength shifting fibres collect the light signal emitted by the scintillator strips and guide it to both ends where it is read by multi-anode photomultiplier tubes. All the elements used in th…
Momentum Measurement of Charged Particles in FASER's Emulsion Detector at the LHC
University of California, Irvine（加州大学尔湾分校）；Zhengzhou University（郑州大学）；ETH Zürich（苏黎世联邦理工学院）；University of Liverpool（利物浦大学）；CERN（欧洲核子研究组织）；University of Geneva（日内瓦大学）；University of Bern（伯尔尼大学）；Chiba University（千叶大学）；Kyushu University（九州大学）；Universität Bonn（波恩大学）；Nikhef National Institute for Su（Nikhef国家研究所）
The OPERA experiment aims at the direct confirmation of the leading oscillation mechanism in the atmospheric sector looking for the appearance of $ν_τ$ in an almost pure $ν_μ$ beam (the CERN CNGS beam). In five years of physics run the experiment collected $17.97 \times 10^{19}$ p.o.t. The detection of $τ$s produced in $ν_τ$ CC interactions and of their decays is accomplished exploiting the high spatial resolution of nuclear emulsions. Furthermore OPERA has good capabilities in detecting electron neutrino interactions, setting limits on the $ν_μ \rightarrow ν_{e}$ oscillation channel. In this …
The OPERA experiment has been designed to perform the first detection of neutrino oscillations in direct appearance mode in the $ν_μ\toν_τ$ channel, through the detection of the tau lepton produced in charged current interaction on an event by event basis. The detector is hybrid, being made of an emulsion/lead target and of electronic detectors. It exploited the CNGS muon neutrino beam from CERN to Gran Sasso, 730 km from the source. Runs with CNGS neutrinos were successfully carried out from 2008 to 2012. We report on the large data sample analysed so far and give our results on the search fo…
OPERA is an experiment dedicated to the observation of $ν_μ$ into $ν_τ$ oscillations in appearance mode using a pure $ν_μ$ beam (CNGS) produced at CERN and detected at Gran Sasso. The experiment exploits a hybrid technology with emulsions and electronics detectors \cite{opera}. The OPERA readout is performed through a triggerless, continuously running, distributed and highly available system. Its global architecture is based on Ethernet-capable smart sensors with microprocessing and network interface directly at the front-end stage. An unique interface board is used for the full detector readi…
