We present a robust strategy to \emph{veto} certain classes of instrumental glitches that appear at the output of interferometric gravitational-wave (GW) detectors.This veto method is `physical' in the sense that, in order to veto a burst trigger, we make use of our knowledge of the coupling of different detector subsystems to the main detector output. The main idea behind this method is that the noise in an instrumental channel X can be \emph{transferred} to the detector output (channel H) using the \emph{transfer function} from X to H, provided the noise coupling is \emph{linear} and the transfer function is \emph{unique}. If a non-stationarity in channel H is causally related to one in channel X, the two have to be consistent with the transfer function. We formulate two methods for testing the consistency between the burst triggers in channel X and channel H. One method makes use of the \emph{null-stream} constructed from channel H and the \emph{transferred} channel X, and the second involves cross-correlating the two. We demonstrate the efficiency of the veto by `injecting' instrumental glitches in the hardware of the GEO 600 detector. The \emph{veto safety} is demonstrated by performing GW-like hardware injections. We also show an example application of this method using 5 days of data from the fifth science run of GEO 600. The method is found to have very high veto efficiency with a very low accidental veto rate.
Presented is a summary of studies by the LIGO Scientific Collaboration's Inspiral Analysis Group on the development of possible vetoes to be used in evaluation of data from the first two LIGO science data runs. Numerous environmental monitor signals and interferometer control channels have been analyzed in order to characterize the interferometers' performance. The results of studies on selected data segments are provided in this paper. The vetoes used in the compact binary inspiral analyses of LIGO's S1 and S2 science data runs are presented and discussed.
The search for signatures of transient, unmodelled gravitational-wave (GW) bursts in the data of ground-based interferometric detectors typically uses `excess-power' search methods. One of the most challenging problems in the burst-data-analysis is to distinguish between actual GW bursts and spurious noise transients that trigger the detection algorithms. In this paper, we present a unique and robust strategy to `veto' the instrumental glitches. This method makes use of the phenomenological understanding of the coupling of different detector sub-systems to the main detector output. The main id…
LIGO and Virgo recently completed searches for gravitational waves at their initial target sensitivities, and soon Advanced LIGO and Advanced Virgo will commence observations with even better capabilities. In the search for short duration signals, such as coalescing compact binary inspirals or "burst" events, noise transients can be problematic. Interferometric gravitational-wave detectors are highly complex instruments, and, based on the experience from the past, the data often contain a large number of noise transients that are not easily distinguishable from possible gravitational-wave sign…
The matched filtering technique is used to search for gravitational wave signals of a known form in the data taken by ground-based detectors. However, the analyzed data contains a number of artifacts arising from various broad-band transients (glitches) of instrumental or environmental origin which can appear with high signal-to-noise ratio on the matched filtering output. This paper describes several techniques to discriminate genuine events from the false ones, based on our knowledge of the signals we look for. Starting with the $χ^2$ discriminator, we show how it may be optimized for free p…
In this paper we present a method for conducting a coherent search for single spin compact binary coalescences in gravitational wave data and compare this search to the existing coincidence method for single spin searches. We propose a method to characterize the regions of the parameter space where the single spin search, both coincident and coherent, will increase detection efficiency over the existing non-precessing search. We also show example results of the coherent search on a stretch of data from LIGO's fourth science run but note that a set of signal based vetoes will be needed before t…
A search for periodic gravitational waves, from sources such as isolated rapidly-spinning neutron stars, was carried out using 510 hours of data from the fourth LIGO science run (S4). The search was for quasi-monochromatic waves in the frequency range from 50 Hz to 1500 Hz, with a linear frequency drift f-dot (measured at the solar system barycenter) in the range -f/tau < f-dot < 0.1 f/tau, where the minimum spin-down age tau was 1000 years for signals below 300 Hz and 10000 years above 300 Hz. The main computational work of the search was distributed over approximately 100000 computers volunt…
The standard multidetector F-statistic for continuous gravitational waves is susceptible to false alarms from instrumental artifacts, for example monochromatic sinusoidal disturbances ('lines'). This vulnerability to line artifacts arises because the F-statistic compares the signal hypothesis to a Gaussian-noise hypothesis, and hence is triggered by anything that resembles the signal hypothesis more than Gaussian noise. Various ad-hoc veto methods to deal with such line artifacts have been proposed and used in the past. Here we develop a Bayesian framework that includes an explicit alternative…
The fourth science run of the LIGO and GEO 600 gravitational-wave detectors, carried out in early 2005, collected data with significantly lower noise than previous science runs. We report on a search for short-duration gravitational-wave bursts with arbitrary waveform in the 64-1600 Hz frequency range appearing in all three LIGO interferometers. Signal consistency tests, data quality cuts, and auxiliary-channel vetoes are applied to reduce the rate of spurious triggers. No gravitational-wave signals are detected in 15.5 days of live observation time; we set a frequentist upper limit of 0.15 pe…
Persistent gravitational waves from rapidly rotating neutron stars, such as those found in some young supernova remnants, may fall in the sensitivity band of the advanced Laser Interferometer Gravitational-wave Observatory (aLIGO). Searches for these signals are computationally challenging, as the frequency and frequency derivative are unknown and evolve rapidly due to the youth of the source. A hidden Markov model (HMM), combined with a maximum-likelihood matched filter, tracks rapid frequency evolution semi-coherently in a computationally efficient manner. We present the results of an HMM se…
Broadband noise in gravitational wave (GW) detectors, also known as triggers, can often be a deterrant to the efficiency with which astrophysical search pipelines detect sources. It is important to understand their instrumental or environmental origin so that they could be eliminated or accounted for in the data. Since the number of triggers is large, data mining approaches such as clustering and classification are useful tools for this task. Classification of triggers based on a handful of discrete properties has been done in the past. A rich information content is available in the waveform o…
Excess transient noise events, or glitches, impact the data quality of ground-based ravitational-wave (GW) detectors and impair the detection of signals produced by astrophysical sources. Identification of the causes of these glitches is a crucial starting point for the improvement of GW signal detectability. However, glitches are the product of linear and non-linear couplings among the interrelated detector-control systems that include mitigation of ground motion and regulation of optic motion, which generally makes it difficult to find their origin. We present a new software called PyChChoo …
Excess transient noise artifacts, or glitches impact the data quality of ground-based gravitational-wave (GW) detectors and impair the detection of signals produced by astrophysical sources. Mitigation of glitches is crucial for improving GW signal detectability. However, glitches are the product of short-lived linear and non-linear couplings among the interrelated detector-control systems that include optic alignment systems and mitigation of seismic disturbances, generally making it difficult to model noise couplings. Hence, typically time periods containing glitches are vetoed to mitigate t…
Ground-based gravitational wave laser interferometers (LIGO, GEO-600, Virgo and Tama-300) have now reached high sensitivity and duty cycle. We present a Bayesian evidence-based approach to the search for gravitational waves, in particular aimed at the followup of candidate events generated by the analysis pipeline. We introduce and demonstrate an efficient method to compute the evidence and odds ratio between different models, and illustrate this approach using the specific case of the gravitational wave signal generated during the inspiral phase of binary systems, modelled at the leading quad…
We introduce a new technique to search for gravitational wave events from compact binary mergers that produce a clear signal only in a single gravitational wave detector, and marginal signals in other detectors. Such a situation can arise when the detectors in a network have different sensitivities, or when sources have unfavorable sky locations or orientations. We start with a short list of loud single-detector triggers from regions of parameter space that are empirically unaffected by glitches (after applying signal-quality vetoes). For each of these triggers, we compute evidence for astroph…
The first observing run of Advanced LIGO spanned 4 months, from September 12, 2015 to January 19, 2016, during which gravitational waves were directly detected from two binary black hole systems, namely GW150914 and GW151226. Confident detection of gravitational waves requires an understanding of instrumental transients and artifacts that can reduce the sensitivity of a search. Studies of the quality of the detector data yield insights into the cause of instrumental artifacts and data quality vetoes specific to a search are produced to mitigate the effects of problematic data. In this paper, t…
We describe directed searches for continuous gravitational waves from sixteen well localized candidate neutron stars assuming none of the stars has a binary companion. The searches were directed toward fifteen supernova remnants and Fomalhaut~b, an extrasolar planet candidate which has been suggested to be a nearby old neutron star. Each search covered a broad band of frequencies and first and second time derivatives. After coherently integrating spans of data from the first Advanced LIGO observing run of 3.5--53.7 days per search, applying data-based vetoes and discounting known instrumental …
