Online inventory optimization (OIO) is online convex optimization with physical memory: inventory carryover makes the feasible action set depend on the past. A natural principle, used in stochastic inventory learning and recently in OIO under a single linear capacity constraint, is to maintain a hidden target chosen by an online learner and implement its projection onto the currently feasible order-up-to set. We prove that this simple principle is optimal for OIO on arbitrary bounded convex capacity sets. With online gradient descent as the base learner, the method improves the best known regret guarantee for OIO on general convex sets from inverse to inverse-square-root dependence on the common-demand probability, and we prove a matching lower bound. The same principle gives the first polylogarithmic regret guarantee for strongly convex losses and the first dynamic regret guarantee adapting to Euclidean path variation on general convex capacity sets. The analysis introduces a norm alignment principle: the right state variable is the distance from the hidden target to the feasible set, measured in the same norm as the projection. Under norm alignment, this distance evolves pathwise as a scalar queue, with target movement as arrival and common demand as service. This reduction to one-dimensional queue control resolves the state dependence and extends the guarantees to general convex capacity sets, beyond the reach of prior productwise approaches. Experiments on synthetic and real-world inventory data corroborate the theory.

Magnetic Navigation (MagNav) has emerged as a vital alternative Positioning, Navigation, and Timing (PNT) solution, leveraging Earth's magnetic field for robust navigation in GPS/GNSS-degraded or denied environments. Despite its potential, the successful deployment of MagNav is currently hindered by the lack of standardized, high-fidelity geomagnetic reference maps. Existing datasets, primarily designed for geological exploration or academic research, do not meet the distinct operational requirements of navigation systems regarding spatial resolution, error quantification, and global accessibility. This paper initiates a community-focused dialogue on future geophysical data requirements for MagNav, grounded in extensive real-world flight trials. We distinguish between two primary use cases with divergent data needs: Operational MagNav, which requires globally consistent, queryable, and uncertainty-aware datasets for field deployment, and MagNav R&D, which demands comprehensive access to raw survey data to foster innovation. We provide a prioritized set of recommendations for future data requirements, including the development of cohesive, merged datasets, the inclusion of localized 3D uncertainty estimates, and the expansion of the World Magnetic Model (WMM) core field model to spherical harmonic degree 13 to improve consistency. Finally, we emphasize the strategic necessity of designated test ranges to validate these requirements and ensure the operational robustness of MagNav infrastructure.

Floating-base robots must balance under rigid contact constraints while interacting safely with humans. Existing whole-body control~(WBC) frameworks allocate the full joint space to locomotion or rely on fixed-gain impedance feedback that accumulates steady-state error under sustained physical human--robot interaction~(pHRI) forces. This paper extends the authors' fixed-base two-layer Impedance MPC to floating-base platforms through a three-level architecture: a centroidal MPC plans contact forces over a 500\,ms horizon; a priority-driven WBC layer resolves balance into joint torques through contact-consistent null-space projection; and the residual null space is governed by a receding-horizon quadratic program~(QP) that predicts and rejects pHRI disturbances using a Kalman-augmented state. A contact-consistent feedback linearization reduces the arm end-effector plant to a double integrator with a \emph{constant} state matrix within each contact mode, enabling offline precomputation of the QP cost and ${\geq}1$\,kHz operation. A covariance-inflation protocol preserves the disturbance estimate across contact-mode switches, guaranteeing zero steady-state error under bounded constant pHRI loads, and an Impedance Equivalence Theorem shows the infinite-horizon limit recovers a classical task-space impedance law whose effective mass, damping, and stiffness adapt to posture and contact configuration. Simulations on a 17-DOF biped and the Unitree G1 humanoid validate the design.

Picture naming requires the transformation of visual object information into a spoken lexical response through perceptual, semantic, lexical, and articulatory processes. This study asked whether semantic-category information is recoverable from high-density EEG during overt picture naming. Sixteen native French-speaking participants performed a picture-naming task using line drawings. Picture labels were embedded with a multilingual text-embedding model and organized into nine interpretable semantic categories, providing a data-driven semantic target space for neural decoding. EEG activity was represented channel-wise using a pre-trained single-channel EEG encoder over an early post-stimulus window, a later naming-related window, and their combination. Nine-class decoding showed above-chance semantic-category discrimination in all temporal representations. Balanced accuracy increased from 0.562 in the early window to 0.610 in the naming-related window, and reached 0.781 when both windows were combined, with a maximum Macro-F1 of 0.784. Class-level F1 scores showed consistent gains across semantic categories, and sensor-level decoding maps indicated spatially distributed category information. These findings suggest that semantic-category structure is reflected in EEG activity during overt picture naming and that early and naming-related temporal windows provide complementary information. The results support the use of modern neural decoding methods as tools for investigating lexical-semantic processing in spoken language production.

We show that the three movements of Beethoven's "Moonlight Sonata" (Op. 27 No. 2) instantiate three distinct machine learning architectures -- not by analogy, but by structural correspondence. Through computational analysis of the score (entropy, Jensen-Shannon divergence, dissonance, hand distributional overlap, self-similarity matrices, temporal memory decay, and contextual pitch embeddings), we establish four counterintuitive findings: (1) perceived musical "temperature" is governed by throughput, not distributional width; (2) the lightest movement carries the highest dissonance; (3) the movements implement streaming, recurrent, and periodic positional encoding memory architectures; and (4) the same pitch class acquires different contextual identities across movements, analogous to contextual vs.static embeddings in NLP -- and unsupervised clustering recovers the tonal structure without music-theoretic input. We construct a reverse sonification (decoding analytical features back into MIDI) and quantify the chirality of the encode-decode cycle: what distributions preserve and sequential ordering destroys. Prompted by a listener's observation that the decoded piece sounds like "mirror isomers that can't be superimposed," the chirality measurement reveals reconstruction loss increasing monotonically with n-gram order. Bootstrap baselines and subsample checks confirm all movements carry sequential information above noise, though raw values are confounded by sample size. Cross-domain comparison shows natural language has higher chirality than music, reflecting stronger sequential constraints.

Dexterous hands must simultaneously track precise finger trajectories and maintain safe, compliant contact -- objectives in tension for any fixed-gain controller. We present an actuator-agnostic Impedance Model Predictive Control (Impedance MPC) framework for dexterous fingers, instantiating the constant-$A_d$ offset-free architecture established for physical human-robot interaction (pHRI); its stability, recursive-feasibility, and input-to-state-stability guarantees are inherited by preserving the architectural assumptions. An algebraic feedforward reduces the tendon transmission -- hydraulic, cable, pneumatic, twisted-string, or series-elastic -- to a constant-coefficient double integrator, so the QP cost inverse is precomputed offline and a 10-step receding-horizon quadratic program runs at 500\,Hz while enforcing hard constraints on contact force (ISO/TS 15066), actuation limits, and jerk. An encoder-only augmented-Kalman disturbance state drives steady-state error to zero under any constant contact load. On a hydraulically actuated finger -- the worked example platform, adding pressure and cavitation constraints -- the 500\,Hz Kalman MPC attains 0.5\,mrad RMS, 0.1\,mrad steady-state, and 6.6\,mrad peak deflection under 1.5\,Nm contact: 183$\times$, 1500$\times$, and 23$\times$ better than classical impedance. The realized first-move stiffness (18$\to$323\,Nm/rad with update rate) is independently verified. The architecture scales to a 16-DOF LEAP Hand MuJoCo simulation, recovering from 2.5\,N grasp-load disturbances within 0.7\,s.

This study presents a statistical and machine learning framework for characterizing a hydrogen-based multi-energy system (H-MES) using one year of high-resolution operational data. Statistical analysis revealed a binary operation driven by renewable surplus, with solar irradiance explaining 45.7% of rank-based variance in hydrogen production, a large effect by conventional standards. Only high-irradiance periods triggered meaningful electrolyzer engagement, while electricity demand exerted a weaker inverse suppression effect ($ε^2 = 0.126$). Multiple regression confirmed electrolyzer power as the dominant linear predictor, with a synergistic solar-wind interaction. Notably, Random Forest analysis ranked wind output first in predictive importance despite its weak bivariate correlation (r = 0.167), revealing non-linear dynamics invisible to parametric methods. A sequence model exploited strong 24-hour autocorrelation (r = 0.845) for operational forecasting, while a reinforcement learning agent optimized hydrogen revenue dispatch. The core contribution is demonstrating that statistical and machine learning approaches are complementary for H-MES modeling and control.

Glioma grading and survival prediction require the integration of heterogeneous information collected at different spatial and biological scales. Histopathology describes tissue morphology, mRNA expression captures molecular activity, and magnetic resonance imaging provides a non-invasive view of tumor extent and radiological heterogeneity. Existing glioma prognosis models often combine only two of these sources, while their alignment objectives remain mostly pairwise. This paper introduces GLORIA, a novel trimodal framework for GLioma Omics - Radiology - hIstopathology Alignment. GLORIA processes whole-slide image regions, gene-expression profiles, and 3D MRI volumes through modality-specific encoders, projects them into a shared latent space, and aligns them with a Gramian contrastive loss that measures the volume spanned by the three modality embeddings. The aligned representations are fused through a cross-modal gating module and optimized jointly for three-class glioma grading and overall survival prediction. We evaluate GLORIA on a matched TCGA-GBM/LGG and BraTS21 cohort, comprising 132 patients with all three modalities. On the shared trimodal test set, GLORIA improves over the bimodal WSI-mRNA baseline in all the metrics considered.

Safe reinforcement learning (RL) aims to learn policies that optimize rewards while satisfying constraints. Predominant approaches rely on soft-constrained policy optimization, which has achieved empirical success but does not provide formal safety guarantees for the learned policy. In contrast, methods with strict guarantees typically rely on explicit certificate functions, whose construction requires the direct synthesis and verification of control-invariant sets, a process that scales poorly with state dimension and often yields overly conservative behavior. In this paper, we present the Provably Safe, yet Scalable RL (PS2-RL) framework, a novel two-phase architecture for learning provably safe policies in a scalable manner, designed to overcome the key bottlenecks of prior methods. Rather than explicitly computing invariant sets, PS2-RL leverages a learned backup policy to forward-integrate the system dynamics, generating an implicit control-invariant set online. In the first phase, the backup policy is trained with our proposed safe-arrival value function, which characterizes the optimal backup policy for invariant-set construction. In the second phase, an RL policy is trained end-to-end through a differentiable projection layer that strictly enforces the safety guarantees induced by the learned backup policy. By maximizing the volume of the implicit control-invariant set in the first phase, the resulting PS2 policy from the second phase is performant and scalable, while maintaining provable safety. Crucially, PS2-RL imposes no restrictions on the underlying RL algorithm and can be plugged into any existing training pipeline. We establish theoretical guarantees for the proposed framework and evaluate it on robotic control tasks with state dimensions up to 10, a regime in which prior provably safe RL methods struggle or become impractical.

Real-time, full-duplex speech interaction is a key feature of next-generation spoken chatbots, allowing the model to listen and speak at the same time and to handle natural phenomena such as overlap, hesitation, and barge-in. Existing speech language models (SpeechLMs) such as LLaMA-Omni and GLM-4-Voice are still turn-based and rely on an external Voice Activity Detection (VAD) module to mark the end of the user's turn, which fundamentally limits their interactive ability. In this paper, we introduce BayLing-Duplex, a native full-duplex SpeechLM where a single autoregressive LLM decides when to listen, when to speak, and when to stop, with no auxiliary turn-taking module. The design adds only a few special tokens to the standard vocabulary, so it transfers across LLMs and reuses existing training and serving stacks with no architectural adaptation. Starting from the public GLM-4-Voice checkpoint and using only 400K full-duplex samples for fine-tuning followed by a lightweight DPO stage, BayLing-Duplex reaches 92% turn-taking success and 100% interruption success on InstructS2S-Eval, while improving the speech-response score from 2.17 to 3.39 over Moshi. BayLing-Duplex also matches or surpasses its turn-based counterpart on Llama Questions, Web Questions, and Alpaca-Eval, showing that simultaneous listen-and-speak modeling does not sacrifice response quality.

A microwave linear analog computer (MiLAC) is a tunable microwave network that performs computation through wave propagation in the analog domain. In beamforming, data streams pass through a reconfigurable admittance network and emerge as antenna signals. For communications, MiLACs are preferably lossless and reciprocal to avoid power dissipation and non-reciprocal components, but these constraints limit the analog beamformers they can realize. Fully-connected MiLACs offer broad flexibility at the cost of a quadratic number of tunable admittances in the antenna count. Stem-connected MiLACs reduce this scaling to linear and preserve point-to-point capacity, but their role in multiuser downlink beamforming and under bounded, discrete hardware constraints has remained open. This paper addresses both questions for the multiuser multiple-input single-output downlink. We show that a stem-connected MiLAC can realize every beamformer on the complex Stiefel manifold and prove that, when $N\ge 2K-1$, this Stiefel-restricted design achieves the same sum-rate as the fully-connected MiLAC, where $N$ and $K$ are the numbers of transmit antennas and users. We then develop a weighted minimum mean-square error solver with a Riemannian Stiefel update, together with a closed-form projection baseline and an alternating refinement for bounded, discrete susceptances. Simulations show that the stem-connected MiLAC matches fully-connected MiLAC performance, approaches the fully digital sum-rate upper bound without symbol-rate digital processing, and recovers most of the loss caused by direct hardware-grid quantization.

Reciprocity between a transmitter and receiver is a foundational requirement in wireless communications. A few recent works have suggested that reciprocity is broken under reflection by reconfigurable intelligent surfaces (RIS) when the reflection phase becomes incident angle dependent. In this work, we rigorously show that these claims are based on the use of idealized reflection coefficients that ignore mutual coupling between heterogeneous unit cells, surface-truncation effects, and structural scattering contributions from the RIS. Full-wave electromagnetic simulations of transmit/receive antennas and a finite-size RIS implemented via a particular unit cell design are performed to quantitatively demonstrate that reciprocity holds even in the presence of incident-angle dependent reflection phases. To show this, we calculate two-port antenna scattering parameters and evaluate the electromagnetic reciprocity integral to support our claims.

This paper presents an optimization framework for the operation of hydrogen-based hybrid electric aerospace propulsion systems consisting of a hydrogen gas turbine and an electric motor powered by a solid oxide fuel cell, connected to the gas turbine via multiple gas channels and heat exchangers. Our framework computes the minimum-fuel optimal operating strategies over a flight mission accounting for the complex propulsion system with strong thermodynamic and mechanical coupling between components. First, we identify surrogate optimization models of the components employing high-fidelity model simulations. Second, we frame the minimum-fuel optimal control problem over a given flight mission and parse it into a static nonlinear optimization problem that can be efficiently solved with off-the-shelf nonlinear programming algorithms. Finally, we apply our optimization framework to a typical flight mission of an advanced, commuter aircraft (Beechcraft 1900D market segment), considering a parallel propulsion system architecture with four different configurations that share a common baseline but differ in the inclusion of an additional battery and by-pass valves around the two heat exchangers. The resulting optimal trajectories are validated against high-fidelity simulation results, demonstrating the accuracy of our framework. Results show that adding by-pass valves around the air and hydrogen heat exchangers can reduce fuel consumption by 19.11 % without the battery, and by 19.56% with the battery. We show that adding a battery yields a slight increase in fuel consumption (below 1%) for future projected energy densities under steady-state conditions. Conversely, when considering state-of-the art energy densities, the additional battery weight outweighs the benefits, limiting its potential applicability to only assisting transients, which are not considered in the present work.

Feedback optimization is a control approach for driving a dynamical system to the solution of an optimization problem by interconnecting the plant with an algorithm. Existing stability guarantees typically rely on timescale separation, enforced by conservative gain bounds that limit transient performance and require a pre-stabilized plant. This paper revisits the robust control perspective on feedback optimization. We formulate the plant-optimizer interconnection as a generalized plant, where the cost gradients are characterized by Zames--Falb Integral Quadratic Constraints. Classical timescale-separation bounds are recovered as a special case of static multipliers, with dynamic multipliers yielding substantially tighter stability margins. The formulation also enables IQC based synthesis of dynamic output feedback controllers that jointly stabilize the plant and optimize transient performance, with possible model uncertainty absorbed into an uncertainty channel. For constrained problems, the framework extends to dynamic controllers that generalize projected gradient flows. Numerical examples illustrate the benefits and flexibility of the proposed approach.

Cooperative massive multiple-input multiple-output (MIMO) promises large gains over cellular deployments, but existing comparisons of different architectures often mix antenna distribution, inter-site coordination, and processing assumptions. This paper introduces a graph-based framework for fair comparison of cellular, coordinated, and cell-free massive-MIMO systems. We differentiate between two key properties, namely antenna distribution and inter-site cooperation, which yields seven representative system types. We derive compatible uplink and downlink spectral efficiency (SE) expressions, including an uplink bound for detectors with mixed instantaneous and statistical effective channel state information (CSI), and adapt scalable user association and processing rules to all considered architectures. We evaluate these systems using extensive numerical simulations and show that for a fair comparison much larger simulation areas (at least 2.5 $\times$ 2.5 km2) than commonly used are required. We introduce the relative capacity, which measures how closely each architecture approaches centralized cell-free processing. The results show that coordinated, phase-aligned beamforming across spatially distributed antennas is the main source of cooperation gains. In dense deployments with few antennas per access point (AP), coordinated Distributed Antenna System (DAS) and hybrid cell-free architectures achieve much of the centralized cell-free performance while requiring substantially weaker midhaul assumptions.

A nonlinear orbital station-keeping solution for the circular and elliptic versions of the Earth-Moon Restricted Three-Body Problem (R3BP) is developed via a backstepping technique. Formal guarantees for global asymptotic stability (GAS) are attained, as shown through Lyapunov's stability theory. The adequacy of the proposed control law is evaluated through the means of numerical trials over closed periodic solutions of the circular and elliptic R3BPs. The ramifications of the control gain choice are carefully studied and simulated.

A linear optimal control law for orbital station-keeping in the Earth-Moon Restricted Three Body Problem (R3BP) is developed via Linear Quadratic Regulator (LQR) theory. First, the cost function is established considering a periodic state-weight matrix, leveraging stability information of the target orbits retrieved through Floquet theory. Then, the resulting periodic Riccati differential equation is solved and local asymptotic stability guarantees are shown. Finally, the performance of the proposed LQR when tracking periodic orbits in the circular and elliptic R3BPs is analyzed numerically.

Reliable return navigation remains an important challenge in GPS-denied environments where external positioning infrastructure may be unavailable or unreliable. This paper presents ForestBack, an infrastructure-free pedestrian return navigation framework based on breadcrumb-based pedestrian dead reckoning (PDR). The system records a user's walking route as a sequence of reversible breadcrumb nodes and generates reverse-path guidance without requiring GPS, Wi-Fi, Bluetooth beacons, or pre-installed infrastructure. ForestBack integrates acceleration-based step detection, adaptive step-length estimation, magnetometer-assisted heading estimation, barometric-altitude correction, and bidirectional breadcrumb path reconstruction. The system was evaluated using an indoor obstacle-avoidance route with five checkpoints, where the user navigated around a central obstacle. A dataset of 36 walking trials and 42,474 time-series samples was used for evaluation, including IMU signals, magnetometer readings, barometric variables, turn-event labels, ground-truth trajectories, baseline PDR outputs, proposed ForestBack outputs, and power-related measurements. Experimental results show that ForestBack reduced the mean RMSE from 1.129 m to 0.965 m compared with traditional PDR, corresponding to a 15.76% improvement. The mean final-position error was reduced from 1.781 m to 1.388 m, while turn-event detection consistency reached approximately 99.90%. These results indicate that ForestBack improves trajectory reconstruction and route-preserving return guidance in obstacle-avoidance scenarios. The released dataset and analysis notebook support reproducibility and future benchmarking of infrastructure-free PDR-based return navigation systems.

This paper investigates the impact of reciprocity calibration errors on the downlink spectral efficiency (SE) of multi-user large antenna systems. Specifically, we consider two calibration approaches: (a) global calibration, in which all antennas (can be distributed access-points (APs)) in the system cooperatively perform calibration, and (b) local calibration, wherein only a subset of antennas involved in downlink beamforming performs calibration. We derive the downlink SE considering the use-and-then-forget bound and side-information bound, and then demonstrate that, when downlink pilots are employed (in the case of side-information bound), the global calibration outperforms local calibration for arbitrary calibration topologies.

Reciprocity-based downlink beamforming is imperative for a scalable time-division duplex massive multiple-input multiple-output~(MIMO) deployment. Specifically, for a dual-antenna repeater-assisted massive MIMO system, a mismatch between forward and reverse path gains at the repeater can exacerbate the overall calibration error between the user equipments (UEs) and the base station (BS), which potentially also contains calibration errors of their individual radio-frequency chains. This paper models the effects of such calibration errors, underpins the relations between the uplink and downlink channels for repeater-assisted systems with calibration errors clubbed with the over-the-air channel estimation errors, and derives analytical expressions of the downlink spectral efficiency. The presented results can then be simplified to several special cases, underscoring situations wherein such errors can become pronounced.

Effective modeling of endangered marine mammal species, such as the North Atlantic Right Whale, is critical for balancing marine conservation with the growing blue economy. Passive acoustic monitoring data collected by autonomous underwater vehicles provide new opportunities for localized marine species detection and oceanographic sensing, but introduce complex statistical challenges such as zero inflation, imperfect detection, and intricate dependence structures. In response, we propose the Deep Zero-Inflated Bernoulli (DeepZIB) model--a deep statistical method which jointly models latent species presence and conditional detection probabilities while learning complex habitat relationships from heterogeneous covariate information. We establish theoretical results on the model's structural properties and conduct simulation experiments to demonstrate its ability to recover underlying parameters and latent presence fields. Application to real-world passive acoustic monitoring data on the North Atlantic Right Whale along the U.S. East Coast demonstrates improved model adequacy and predictive performance in capturing the species' dynamic and spatially varying habitat. A key advantage of DeepZIB is its ability to generate high-resolution, spatially and temporally varying presence maps, providing valuable insights for targeted and risk-aware management of blue economy industries, ranging from offshore and marine energy, to fisheries management and maritime transport.

This article studies the stability of feedback interconnections of linear time-invariant systems based on frequency-dependent passivity indices. Using these frequency-dependent passivity indices, we show that the feedback interconnection of two systems can be certified to be stable even if both systems have a lack of passivity in terms of their scalar passivity indices. The main contribution of this paper is a new stability theorem based on frequency-dependent passivity indices. Moreover, we discuss the connection of the proposed feedback stability theorem to prior results based on scalar passivity indices. A numerical case study showcases the advantages of frequency-dependent passivity indices over scalar indices for feedback interconnections of linear systems.

The Geometric Dilution of Precision (GDoP) characterizes the noise sensitivity of a Time-Difference-of-Arrival (TDoA) localization system, but does not capture every way the analytical multilateration solution can become ill-conditioned. We introduce a complementary geometry-quality metric $κ$, the leading coefficient of the closed-form TDoA solver's quadratic, and derive its $N$-dimensional generalization through a vectorized formulation. Two closed-form algebraic identities relate $κ$ to the Jacobian determinant of the measurement model and to the quadratic's discriminant, establishing that the system exhibits exactly two distinct singularity loci: branch divergence and the Jacobian/branch-merge locus flagged by GDoP. A Cramér--Rao-bound-linked closed form for the noise sensitivity $σ_κ$ under the standard Gaussian ToA model is validated against Monte Carlo to 2% median relative error. An empirical atlas over a dimensionless geometry parameter space confirms both identities at machine precision and shows that $κ$-bad regions and GDoP-bad regions are non-trivially disjoint in target space, establishing the two metrics as genuinely complementary. A case study on a four-node operational array, with per-sensor time of arrival (ToA) noise estimated empirically from Automatic Dependent Surveillance Broadcast (ADS-B)-paired over-the-air captures, shows that the theory-predicted threshold and a Monte-Carlo-measured operational threshold agree on the per-subsystem ordering at the deployment noise level. Their ratio is approximately constant across the three two-dimensional subsystems, serving as a deployment-specific calibration constant between the algebraic $κ$-noise floor and the downstream operational threshold, analogous in spirit to the standard relation linking GDoP to the circular error probable.

In recent years, neural networks have become the dominant models in most point cloud upsampling methods. Although these approaches are achieving good results, they do have drawbacks, such as a lack of interpretability and data dependency. Moreover, they have to be trained on a dataset that is similar to the test data in order to perform well. To avoid these disadvantages, we propose Point Cloud Upsampling through Patch-based Frequency Superposition (PUtPFS), an optimization-based approach that selects subsets of points and estimates the surface of this set through superpositioning spatial frequencies. Then, new points are placed on this surface. By successively selecting points in the least dense regions of the point cloud, a uniform upsampling can be reached. With this method, we surpass the current best upsampling results in the commonly considered point-to-surface distance. Furthermore, we achieve the best Chamfer and Hausdorff distance among the optimization-based approaches. As an additional advantage, our method does not need any training data and is mathematically interpretable.

Integrated Sensing and Communication (ISAC) enables sensing capabilities by reusing communication signals, making it particularly attractive for large-scale deployments through signals of opportunity. While most existing ISAC research targets wideband systems, Low Power Wide Area Network (LPWAN) technologies such as LoRa remain largely unexplored from a radar-like sensing perspective. Existing LoRa-based approaches mainly focus on motion detection or require modifications of the communication waveform, limiting their applicability in deployed networks. This paper investigates the feasibility of radar-like sensing using unmodified LoRa communication signals as signals of opportunity in a purely passive bistatic ISAC configuration. The proposed approach focuses on Doppler-based sensing to enable target separation and super-resolved target estimation without interfering with existing LoRa network operation. The analytically derived sensing capabilities are compared against simulation results and validated through bistatic measurements using two USRP B210 software-defined radios, confirming the feasibility of Doppler-based LoRa sensing under practical conditions and revealing relevant implementation challenges. The results demonstrate that LoRa-based ISAC enables highly scalable, large-area, low-resolution sensing by leveraging existing infrastructure, providing a complementary sensing capability to area-limited high-resolution 6G ISAC systems, and a foundation for future multi-node and data fusion extensions.

While deep learning-based transient stability assessment (TSA) approaches have exhibited great potential in power system stability monitoring, they are prone to undergo performance degradation in practical contexts with frequent variations of operating conditions. To address this issue, this work develops an adaptive TSA framework via domain adaptation-enabled deep transfer learning. First, for the sake of capturing the primary transient stability characteristics, a robust metric, i.e., heterogeneous hybrid distribution metric (HHDM), is designed through mathematical means to effectively handle multi-scale Gaussian and long-tail distributions of transient responsive data and to precisely quantify the intrinsic distributional discrepancies between the source and target domains corresponding to different operating scenarios. With the help of the HHDM, a Bayesian theory-based dual-distribution domain adaptation method is constructed, aligning not only marginal probability distributions between domains but also the distributions of sub-domain categories. Such alignments enable fine-grained transient stability feature transfer, helping significantly improve the adaptability of a well-trained TSA model to target domains. Furthermore, a multilayer sparse regularization algorithm is introduced to mitigate feature volatility caused by variations in operating scenarios, thereby enhancing the model's generalization in the presence of unforeseen scenarios. Numerical tests on three test systems illustrate that, compared with conventional methods, the proposed framework improves online TSA accuracy by 0.5% to 5% in a cost-effective manner, with the learning cost for TSA model update largely reduced.

HVDC protection will be required in future multiterminal HVDC grids to prevent large outages caused by DC faults. Therefore, system-level protection design is essential for the development of HVDC switching stations that connect several converter stations and lines within these grids. This paper presents an optimization method for the design of HVDC circuit breaker (DCCB) configurations in HVDC switching stations and electrical energy hubs. This approach builds on the current practice of using selected configurations based on pre-defined protection strategies. In contrast to these existing methods, the DC switching station design in the proposed method offers significantly more flexibility and allows the consideration of large numbers of relevant operating conditions, leading to more effective, optimal design outcomes. A mixed-integer linear optimization problem is formulated to design the DC protection and minimize the risk of high impact DC faults. An example case study demonstrates that the optimization method allows the calculation of the optimal number of DCCBs for a given DC switching station, based on the failure rates of DC grid components and the DCCB cost relative to the fault impact. With these results, the marginal benefit to risk reduction of each additional DCCB included in a DC switching station is calculated. Moreover, the result of the optimization problem provides the optimal breaker configuration for the required number of DCCBs and can consequently be used as a topological design tool for DC switching stations.

Multispectral (MS) imaging extends beyond conventional RGB imaging by capturing more spectral bands, thereby improving illuminant spectrum estimation (ISE). However, existing methods often fail to fully exploit spectral information, resulting in suboptimal performance under diverse lighting conditions and across different sensor domains. Hence, we propose a deep learning framework with a spatio-spectral feature extraction block, which incorporates spectral attention mechanisms to enhance spectral correlation and preserve illuminant-relevant spatial features. Through the inclusion of an illuminant prior (IP), our approach prioritizes specific channels that provide more meaningful information in an MS image. We also propose a spectral-domain transform across different MS sensor spaces. The results demonstrate that illuminant spectra learned in high-dimensional sensor spaces can be effectively transformed to various lower-dimensional camera sensor spaces without any additional training. To facilitate evaluation, we introduce a real-world MS dataset containing high-dimensional ground-truth illumination spectra captured under diverse lighting conditions. Through extensive experiments, we demonstrate that our method achieves superior accuracy compared to existing models, thus providing a practical solution for real-world ISE. The code and dataset are available at https://github.com/hyejin5/Spectrum-Aware-Illumination-Estimation-Using-Multispectral-Image.

The intelligent evolution of mission-critical networks, such as the Internet of vehicles (IoV) and the low-altitude economy (LAE), requires sixth-generation (6G) networks to move beyond discrete physical parameter estimation toward deeper environmental understanding. However, existing integrated sensing and communications (ISAC) studies mainly focus on target-level sensing, which provides fragmented snapshots of the physical world and lacks the behavioral semantic capability to interpret intent. This limitation hinders the intelligent evolution of such networks and prevents 6G from acquiring the essential sensing foundation to evolve into an "intelligent service engine". To bridge this gap, ISAC must advance toward event-level sensing, which models continuous-time states to enable persistent recognition and prediction of target intent and behavioral semantics. This article presents a comprehensive overview of event-level sensing in 6G ISAC networks. We first introduce its fundamental concepts, sensing types, and representative scenarios. We then review key enabling techniques across waveform design, target state estimation and tracking, and event recognition. Furthermore, focusing on IoV and LAE scenarios, we discuss representative applications of ISAC event-level sensing and the intelligent enhancement of downstream operational functions enabled by event-level information. Finally, we highlight future research trends and potential directions to further advance ISAC event-level sensing toward intelligent and proactive 6G networks.

Accurate and computationally efficient vehicle models are essential for motion planning of autonomous vehicles, where positional accuracy directly affects trajectory feasibility and safety. However, the positional accuracy has not been systematically evaluated against real measurements. Therefore, this paper compares the short-horizon positional accuracy of three single-track vehicle models against vehicle measurements across various driving maneuvers. Model parameters are identified through dedicated experiments with the instrumented test vehicle. Rather than identifying a single best model, this work aims to provide insight into the trade-offs between model complexity, parameterization quality, and positional accuracy for informed model selection in Model Predictive Control applications.