When a language model processes a hallucinated response, its attention routing tends to fail in one of two shapes: over-concentrating on a narrow set of positions, or spreading so diffusely that relevance is diluted, and the shape of the failure carries diagnostic signal. We study these shapes as a diagnostic characterization, computed from attention matrices under \emph{forced scoring} of benchmark-labeled responses rather than during live generation. A widely used family of spectral methods analyzes the symmetric component of the degree-normalized attention operator, which governs transport \emph{capacity}; we prove that every transpose-invariant spectral diagnostic of this operator is structurally \emph{orientation-blind} (it cannot distinguish an operator from its transpose, and therefore cannot detect information-flow direction), with a converse to the blindness theorem bounding any Lipschitz diagnostic's transpose sensitivity by the asymmetry coefficient $G$. Pairing this with a closed-form bipartite-Cheeger landscape for canonical causal architectures, we show that uniform causal attention satisfies an $n$-independent floor $ϕ\ge 1/5$, while window attention pierces the floor as $O(w/n)$; failure modes are shape-different, not just value-different. This floor is an idealized-architecture benchmark, not an empirical attractor: the fraction of real attention heads that pierce it is itself an architectural signature. The resulting two-axis diagnostic ($ϕ$ for capacity, $G$ for direction) yields a falsifiable polarity prediction: bottleneck- and diffuse-dominated benchmarks should exhibit opposite polarity. Under length-controlled evaluation, transport features retain interpretable signal (0.62-0.84 LC-AUROC) across the tested decoder-only, encoder-only, and encoder-decoder models, with polarity reversing as predicted between HaluEval and MedHallu.

We propose HIN-LRI, a hybrid framework that augments a classical numerical solver with a neural operator trained to correct the solver's structured truncation error. A base low-regularity integrator provides a consistent first-order approximation to nonlinear dispersive PDEs, while a lightweight neural network, operating on a low-dimensional latent manifold, learns the residual defect that analytical methods cannot close. An explicit time-step scaling on the neural correction ensures that its Lipschitz contribution remains $\mathcal{O}(τ)$, yielding a Gronwall stability factor bounded uniformly in the step size and independent of the spatial resolution. The network is trained end-to-end through a solver-in-the-loop objective that unrolls the full iteration and penalises trajectory error in a Bourgain-type norm, aligning learning with multi-step solver dynamics rather than isolated one-step targets. Under stated assumptions, the global error satisfies $C(\varepsilon_{net}+δ)\,τ^γ\ln(1/τ)$, where $\varepsilon_{net}$ measures the network approximation quality and $δ$ the training shortfall. Experiments on three dispersive benchmarks with rough data show that HIN-LRI improves accuracy over analytical integrators, splitting methods, and neural PDE surrogates, with stable spatial refinement, effective out-of-distribution transfer, and modest online overhead.

Clinical named entity recognition from dental progress notes is challenging because documentation is highly unstructured, domain-specific, and often privacy-sensitive. We developed a locally deployable framework that enables small language models to self-generate, verify, refine, and evaluate entity-specific prompts for extracting multiple clinical entities from dental notes. Using 1,200 annotated notes, we evaluated candidate open-weight models with multi-prompt ensemble inference and further adapted selected models using QLoRA-based supervised fine-tuning and direct preference optimization. Model performance varied substantially, highlighting the need for task-specific evaluation rather than reliance on generic benchmarks. Qwen2.5-14B-Instruct achieved the strongest baseline performance. After DPO, Qwen2.5-14B-Instruct and Llama-3.1-8B-Instruct achieved micro/macro F1 scores of 0.864/0.837 and 0.806/0.797, respectively. These findings suggest that automated prompt optimization combined with lightweight preference-based post-training can support scalable clinical information extraction using locally deployed small language models.

Diffusion models provide a powerful generative prior for perceptual reconstruction at ultra-low bitrates, but effective video compression requires controlling the generative process using highly compact conditioning signals. In this work, we present ActDiff-VC, a diffusion-based video compression framework for the ultra-low-bitrate regime. Our method partitions videos into variable-length segments, transmits keyframes only when needed, and summarizes temporal dynamics using a compact set of tracked point trajectories. Conditioned on these sparse signals, a conditional diffusion decoder synthesizes the remaining frames, enabling perceptually realistic reconstruction under severe rate constraints. To support this design, we introduce two mechanisms: content-adaptive keyframe selection and budget-aware sparse trajectory selection, which together enable compact yet effective conditioning for generative reconstruction. Experiments on the UVG and MCL-JCV benchmarks show that ActDiff-VC achieves up to 64.6\% bitrate reduction at matched NIQE, improves KID by up to 64.6\% and FID by up to 37.7\% at comparable bitrates against strong learned codecs, and delivers favorable perceptual rate--distortion trade-offs relative to learned and diffusion-based baselines in the ultra-low-bitrate regime.

A semantic gap separates how users describe tasks from how tools are documented. As API ecosystems scale to tens of thousands of endpoints, static retrieval from the initial query alone cannot bridge this gap: the agent's understanding of what it needs evolves during execution, but its tool set does not. We identify this retrieval interface, not planning, as the binding constraint on end-to-end agent performance, and introduce FitText, a training-free framework that makes retrieval dynamic by embedding it directly in the agent's reasoning loop. FitText treats retrieval as test-time evolution of hypotheses: the agent generates natural-language pseudo-tool descriptions (revisable beliefs about the tool it needs), refines them iteratively using retrieval feedback, and explores diverse alternatives through stochastic generation. Memetic Retrieval adds evolutionary selection pressure over candidate descriptions, guided by a tool memory that avoids redundant search. On ToolRet (three domains), FitText's reformulation strategies improve NDCG@5 by 2.7 to 10.6 points over static query retrieval across all base models; on StableToolBench (16,464 APIs) with GPT-5.4-mini, Memetic reaches an 84.3% pooled pass rate, a 26.7-point absolute gain over static query retrieval.

Multimodal large language models can write code to produce complex programs as well as use programs to do 3D modeling, which opens up a new avenue for 3D generation powered by their priors, world knowledge and reasoning. Yet existing benchmarks rarely evaluate 3D modeling through code. Such modeling demands more than runnable code: from a text or visual specification, a model must generate a parametric 3D program that is geometrically precise, semantically aligned and assembly-consistent. We introduce P3D-Bench, a benchmark for parametric 3D generation. Unlike a 3D mesh, a parametric 3D program exposes explicit dimensions, construction operations and part relations, revealing whether a model recovers a design's structure, not just its appearance. Under a unified protocol, P3D-Bench covers three task families (Text-to-3D, Image-to-3D and Assembly-3D) and scores each output for executability, geometric fidelity, topology, text-grounded constraints, multiview semantic alignment and part-level structure. We evaluate frontier MLLMs and text-only LLMs on 400 text cases, 400 image cases and 203 annotated assemblies, with domain-specific models as reference points. Our extensive evaluation yields three findings. First, assemblies are the hardest setting, where models still fail to compose multiple parts into a coherent structure. Second, models can often recover the global shape and semantic identity of the target object, yet fail to reproduce the precise parametric geometry specified by the input. Third, part-level modeling remains weak on assemblies, where models recover neither the geometry of each part nor the right number of parts. These results position P3D-Bench as a benchmark for evaluating precise parametric geometry and part-level structure in parametric 3D generation.

With the widespread deployment of Multimodal Large Language Models (MLLMs) in social interaction, understanding and controlling their behavior under complex personality conditions is essential. This paper introduces explicit personality conditioning and establishes a systematic evaluation framework encompassing single-personality induction, multi-personality induction, and personality switching. Experiments show that personality induction improves image captioning performance but can impair performance on tasks requiring precise reasoning, such as visual question answering (VQA). Balancing and residual effects are observed during multi-trait composition and dynamic switching, indicating that model behavior is co-modulated by both previous and current personality constraints. Existing prompt-based personality induction methods show limited transferability to multimodal settings. Our work reveals the dynamic and complex nature of personality modeling in MLLMs and underscores the need for robust, tailored methods for personality induction and evaluation. The code will be released when the paper is accepted.

Reinforcement learning with verifiable rewards (RLVR) has become standard for improving LLM reasoning. However, existing PPO-style trust-region mechanisms remain position-agnostic by enforcing uniform thresholds across all tokens independently. This pointwise treatment conflicts with autoregressive generation in two critical ways. First, uniform thresholds ignore autoregressive asymmetry. Early-stage deviations produce compounding sequence-level drift, causing static thresholds to under-regulate early divergence and excessively constrain late-stage exploration. Second, evaluating token-level divergence in isolation overlooks cumulative prefix drift, granting the same divergence allowance regardless of how far the conditioning history has already deviated from the rollout policy. To address this limitation, we propose CPPO (Cumulative Prefix-divergence Policy Optimization), a token-level masking rule that aligns updates with a finite-horizon policy-improvement bound via two coupled mechanisms. First, a position-weighted threshold imposes stricter limits at early positions whose effects persist longer, relaxing constraints for late-stage tokens. Second, a cumulative prefix budget tracks historical deviations, dynamically restricting further token-level deviation to prevent compounding errors along the prefix. Empirically, CPPO enhances training stability and significantly improves reasoning accuracy across various model scales.

Autoregressive (AR) language modeling is the dominant paradigm for text generation, yet its sequential token-by-token decoding makes inference memory-bound and inefficient. Existing acceleration approaches, such as speculative decoding and diffusion language models, can yield speedups under certain conditions but do not directly address high-load batch serving--the scenario most critical for industrial-scale deployment. We introduce K-Forcing, a push-forward language modeling paradigm for joint next-k-token decoding. K-Forcing distills an existing AR model into a conditional push-forward mapping--one that transforms independent uniform noise variables into a joint sample of multiple future tokens in a single forward pass. This design preserves fixed-length outputs, reuses the AR teacher backbone, and remains compatible with standard AR serving infrastructure. We train this mapping via progressive self-forcing distillation, which gradually expands the prediction window while enabling the student to closely match the sequence distribution of the AR teacher. We evaluate K-Forcing on LM1B and OpenWebText using a standard causal Transformer backbone. When aggressively configured to generate k = 4 tokens per forward pass, K-Forcing delivers approximately 2.4-3.5x speedup across different batch sizes, while incurring modest quality degradation relative to its AR teacher. As inference increasingly dominates the lifetime compute cost of modern LLMs, K-Forcing offers a promising route toward accelerating AR generation under real-world high-load deployment.

Controlled character animation requires transferring motion from a driving sequence to a reference character. Prior works heavily rely on intermediate representations, including pose skeletons to represent motion or masked background to represent environment, which inevitably leads to information loss. To address this, we present SCAIL-2, a framework that bypasses those intermediates and achieves \textbf{end-to-end} character animation. By directly concatenating driving videos to the sequence, the model can obtain all the required visual information from the input video. To address the lack of end-to-end data, we unify sub-tasks of character animation with decoupled conditions and then curate a pipeline to synthesize MotionPair-60K, an end-to-end motion transfer dataset containing heterogeneous tasks of character animation. To achieve the unification, we utilize in-context mask conditioning and mode-specific RoPE as soft guidance beyond textual instructions and raw visual information. To address synthetic discrepancy in detailed regions, we propose Bias-Aware DPO to construct preference items to mitigate the errors. Extensive experiments demonstrate that our method substantially outperforms existing state-of-the-art approaches in various character animation tasks. A large subset of synthetic data as well as model weights will be released at our project page: https://teal024.github.io/SCAIL-2/.

As agentic applications increasingly route user tasks through official and third-party LLM APIs, provenance becomes an operational question: which model generated a given black-box response? We study Dynamic Black-Box LLM Provenance: identifying the source LLM from generations elicited by query-varying, non-predefined prompts rather than a fixed input set or benchmark suite. This setting is difficult because prompt semantics dominate the text, while model-specific authorship traces are weak and inconsistent at the surface level. We introduce READER (Robust Evidence-based Authorship Decoding via Extracted Representations), a lightweight provenance framework that treats a frozen proxy LLM as a reader of hidden authorship evidence. READER maps black-box outputs into proxy activation space, temporally filters token states within each response, and performs Bayesian Evidence Accumulation by summing single-response log-posterior evidence across independently sampled prompts. This avoids fragile mean-pooling of prompt-specific representations while preserving the query-wise evidence needed for calibrated confidence. On Agent500, a 50-target dataset built from agent-style prompts, READER reaches $31.0$-$42.4\%$ top-1 accuracy from a single response and $70.0$-$84.0\%$ from 50 responses, substantially outperforming sentence-encoder fingerprints. Scaling across nine proxy readers further shows that stronger LLMs expose more linearly decodable authorship structure, suggesting that authorship perception is already present in frozen LLM representations and can be converted into reliable multi-query attribution.

Unsupervised building change detection aims to learn building-change masks from unlabeled bi-temporal remote sensing images. Existing label-free methods often follow a discrepancy-to-mask paradigm, directly using temporal differences, frozen foundation-model responses, prompt-based outputs, or post-processing results as final change maps. Although these strategies provide annotation-free cues, they do not learn a task-specific building-change detector and remain vulnerable to the gap between generic temporal discrepancies and building-defined structural changes. In practice, such discrepancies are often noisy and task-irrelevant, as appearance shifts, registration errors, and non-building modifications can produce strong but misleading responses. To address this problem, we propose SST-CD, a spatially selective self-training framework that reformulates fully label-free building change detection as end-to-end detector learning under noisy pseudo supervision. SST-CD uses temporal discrepancies as candidate pseudo labels and trains the detector only on spatially reliable pixels, whose reliability is estimated by a local consistency criterion that filters inconsistent regions from supervision. To further stabilize noisy self-training, a lightweight feature adapter recalibrates bi-temporal features, while a prototype-based decoder produces compact change and no-change representations. Experiments on LEVIR-CD, WHU-CD, and DSIFN-CD show that SST-CD achieves F1 scores of 83.08%, 91.69%, and 86.60%, respectively, outperforming existing unsupervised and label-free baselines.

Background. Atrial fibrillation (AF) is the most prevalent cardiac arrhythmia and a major determinant of prognosis. Established AF risk scores rely on factors (older age, hypertension) nearly ubiquitous among patients with cardiovascular disease (CVD), offering limited stratification in this high-risk group. Most target long-term (5-10 year) rather than medium-term prediction. We developed interpretable ML models predicting AF risk over a 24-month and entire follow-up horizon in CVD patients using routinely collected hospital data. Methods. Single-center retrospective study of electronic health records from the National Research Cardiology Center (Russia) for patients aged >=18 with CVD but without pre-existing AF, hospitalized more than once between January 2012 and May 2019. A custom NLP pipeline transformed unstructured discharge reports into 73 structured features, combining a rule-based parser with transformer-based NER. Using LightAutoML we built a full model (73 features), a simple model (reduced subset), and a linear model for a bedside risk score. Performance was assessed by ROC AUC, compared with CHARGE-AF, C2HEST, MHS, and HAVOC, and interpreted via SHAP. Results. Of 80,576 records from 45,000 patients, 17,562 met inclusion criteria; 1,438 (8.19%) developed AF. The full model reached ROC AUC 0.735 (24-month) and 0.696 (entire follow-up); the simple model was nearly identical (0.725, 0.696). All non-linear models outperformed the four clinical risk scores (ROC AUC 0.53-0.64). The simple model uses 13 features and is named Pre-AF 13. SHAP identified age and left atrial volume as dominant predictors. A linear risk score (Pre-AF 9) stratified observed 24-month AF incidence from ~7% to 36%. Conclusion. Interpretable ML models built from routinely collected EHR data identify high-AF-risk CVD patients, outperforming established clinical risk scores.

Autonomous visual interception of agile aerial targets is challenging due to unpredictable target motion, limited sensing, and the strong coupling between target visibility and interceptor maneuverability. Most existing strapdown-camera interception methods preserve visibility using conic line-of-sight (LOS) constraints that keep the target near the image center. While safe, such symmetric constraints unnecessarily restrict maneuverability and can significantly reduce the usable thrust for pursuit. Motivated by the observation that aggressive FPV pilots do not maintain equal visibility margins in all image directions, this paper proposes a Planar-Sector Line-of-Sight (PS-LOS) guidance framework for autonomous interception using a lifting-wing quadcopter equipped with only a strapdown monocular camera. PS-LOS tightly constrains lateral image error while relaxing longitudinal image error within a safe field-of-view margin, preserving visibility while releasing maneuverability for acceleration-intensive pursuit. Under the lifting-wing quadcopter model, PS-LOS provides nearly 50% more available thrust near the LOS direction than conventional conic LOS constraints. To realize LOS-only interception without direct depth measurements, a delay-compensated state-estimation framework and a nonlinear guidance-and-control architecture are developed for lifting-wing quadcopters. Extensive outdoor flight experiments demonstrate autonomous interception of agile targets exhibiting large-amplitude, high-frequency, and unpredictable motion under real wind disturbances. The proposed system achieves successful interceptions at ranges up to 138 m while maintaining continuous visual tracking throughout the engagement. The results validate PS-LOS as a visibility-preserving, maneuverability-aware guidance framework for long-range visual interception of agile aerial targets.

Spatial intelligence is a key frontier for multimodal large language models (MLLMs), enabling them to reason about the physical world from visual experience. Inspired by human spatial cognition, recent approaches construct grid-based cognitive maps from multi-frame visual inputs to maintain coherent spatial representations over time. However, limited context lengths still challenge spatial understanding, while existing methods, such as long-context modeling and external memory, often require architectural changes, memory modules, or finetuning, limiting their applicability to off-the-shelf pretrained MLLMs. This motivates a lightweight, model-agnostic method for preserving spatial information beyond the native context window. To this end, we propose a plug-and-play multi-agent framework that collaboratively constructs cognitive maps as structured spatial memory, enhancing the spatial understanding of arbitrary pretrained MLLMs without architectural modification or additional training. Our framework features local-global agent coordination, cognitive map construction with atomic commits, and cross-agent verification. Extensive experiments demonstrate that our method achieves superior performance on spatial understanding tasks while remaining fully training-free. Code will be released.

We present ViP-VL, an efficient Vietnamese Self-supervised speech Pretraining model leveraging Vector-quantization Learning. To bridge the gap between high-resolution audio and efficient processing, ViP-VL incorporates Acoustic Stacking and Receptive Field Alignment to enable a synchronized 8x subsampling rate within the ChunkFormer architecture, while further enhancing representation robustness through a specialized Mask Selection Strategy during pretraining on the BEST-RQ framework. Pretrained on 17,000 hours of unlabeled Vietnamese speech, our model establishes new state-of-the-art results across four major downstream tasks: Automatic Speech Recognition, Speech Emotion Recognition, Dialect Classification, and Speaker Verification. To facilitate future research and the development of high-performance Vietnamese speech technologies, we publicly release our pretrained weights and implementation at github.com/khanld/chunkformer.

Hallucination detection in large language and vision-language models is increasingly framed as selective prediction, where a detector assigns a confidence score and abstains when confidence is low. Unsupervised sampling detectors (Semantic Entropy) avoid labels but plateau in quality, while supervised probes attain stronger in-distribution scores yet degrade sharply when calibration labels are scarce. We recover the response manifold of an LLM as the density ridge of a kernel density estimate built on a six-dimensional kinematic feature map of hidden state generation trajectories. A test generation is scored by the negated Euclidean distance from its projected feature point to the nearest ridge vertex, yielding a low-dimensional geometric skeleton of the stochastic output distribution. We evaluate against Semantic Entropy, topological methods, and log-probability on six QA benchmarks (HaluEval-QA, TriviaQA, GSM8K, POPE, ScienceQA, A-OKVQA) using eight text and vision LLMs in a deliberately label-scarce protocol ($n_{\text{cal}}{=}200$ queries, $N{=}5$ generations). Our ridge-based score beats on AUROC with 5-20 points gain, while demonstrating tempered degradation under calibration-label scarcity.

Transitioning bidirectional video diffusion models into an autoregressive paradigm improves the interactivity of video world models, but existing causal pipelines need many stages (control fine-tuning, autoregressive training, causal initialization, few-step distillation) and still trail bidirectional models in quality due to error accumulation. Recent world models such as Yume-1.5 and Matrix-Game-3.0 instead adopt a bidirectional autoregressive approach, gaining fidelity and stable long-horizon rollout from self-correcting error propagation, yet open-source frameworks (e.g., minWM) support only causal models. We present BiWM, the first full-stack framework for interactive video world models under the bidirectional autoregressive paradigm, jointly optimizing generation quality and inference speed. From a pretrained video backbone, BiWM injects camera control by fine-tuning, then runs a few-step Distribution Matching Distillation (DMD) stage that turns the backbone into an action/camera-controllable world model: just two training stages instead of four in minWM, converging in a few hundred steps on 8xH200 GPUs. A single recipe spans Wan2.1-1.3B, Wan2.2-5B, HunyuanVideo-1.5-8B, and LTX-2.3-22B, and also supports secondary fine-tuning of existing bidirectional models. BiWM enables real-world camera control where minWM loses controllability, integrates pluggable history compression (FramePack-style and PackForcing-style) for long rollouts, and offers an optional NVFP4 4-bit training/inference pipeline. To counter DMD's mode-seeking degradation, we add GAN and mass-covering forward-KL objectives that preserve scene dynamics. We open-source BiWM for resource-constrained research and high-fidelity environment simulation.

Flow-matching transformers achieve strong audio separation, yet their attention dynamics are opaque. We adapt established causal-intervention principles into a deterministic, inference-time probing protocol for SAM Audio. Orthogonal probing uncovers a dual-pathway text-conditioning mechanism: additive injections control semantic identity, while cross-attention refines acoustic structure. We observe an asynchronous layerwise convergence: stable layers build temporal scaffolds early, whereas fast layers continue resolving artifacts during sampling. The model also attenuates temporal segmentation cues to maintain continuous-flow stability. Using these insights, we propose Layer-Selective Attention Caching (LSAC), a training-free acceleration method that caches attention in stable layers. Across acoustic complexities, LSAC cuts self-attention computation by about ~25% with negligible quality loss and yields up to 6.7x higher quality retention than naive step reduction.

World-Action Models (WAMs) have emerged as a promising paradigm for embodied control by coupling future visual prediction with action generation. However, most existing WAMs rely on photorealistic future prediction, which incurs high inference latency and makes real-time robot deployment difficult. This motivates a more efficient WAM design that preserves the control benefits of future visual prediction while reducing its inference cost. We introduce Efficient-WAM, a World-Action Model that reduces the cost of future imagination while preserving its control benefit. Efficient-WAM improves inference efficiency via a compact video expert transferred from WAN-2.2-5B, token-sparse video latents, and asymmetric video-action denoising that allocates fewer sampling steps to video than to actions. Instead of optimizing the future branch for visual fidelity, Efficient-WAM treats future video prediction as a compact guidance signal for action generation. Comprehensive experiments on RoboTwin 2.0 and real-world manipulation tasks show that Efficient-WAM maintains strong action performance despite visibly coarse future predictions. While maintaining competitive control capabilities, our 1B-parameter model can reduce per-chunk latency to around 100 ms during physical deployment, achieving a 30x speedup over existing WAMs.

We study a dynamic assortment problem on a two-sided service platform with incomplete information and heterogeneous customers in a discrete-time setting. In each period, a customer arrives seeking service, and the platform chooses an assortment of sellers to display. The customer then proposes a transaction to at most one seller in the assortment according to a multinomial logit choice model. After a fixed number of periods, sellers review the proposals they have received and each chooses at most one customer according to another multinomial logit choice model, after which the cycle repeats. A key challenge is that the platform does not know the choice-model parameters of either customers or sellers in advance. To our knowledge, this is the first study of a dynamic assortment problem in which both sides' choice parameters are unknown. We develop a data-driven algorithm that learns these parameters while optimizing the platform's objective over time. We evaluate performance using regret, which measures revenue loss relative to a clairvoyant benchmark that knows all parameters and customer arrivals in advance. We show that the algorithm's worst-case regret grows polylogarithmically over time, and we derive a matching lower bound, establishing its rate optimality.

We study feed-forward ReLU networks with fixed readout and quadratic loss. The aim is to rewrite gradient descent not primarily as a dynamics in weight space, but as a collective dynamics closed in terms of fields defined on the training-set space. For a single hidden layer, the weight variables can be eliminated from the activation dynamics, yielding a closed equation for the residuals governed by a collective kernel that factorizes into an input-geometric matrix and a dynamical co-activation matrix. For deeper networks, the residual dynamics retains a clean layer-wise kernel structure. However, from depth three onward, closure requires a hierarchy of weight-induced Gram operators that mediate information transport across layers. Moreover, the conjugate-field dynamics is governed by operators satisfying a backward pullback recursion, of which the weight-induced Gram operators are the first nontrivial instances.

Computer-use agents (CUAs) increasingly operate in runtimes that combine visual desktop control, command-line execution, code editing, browsers, and external tools. Existing benchmarks, however, often evaluate these interfaces as separable capabilities, leaving long-horizon cross-interface orchestration under-tested. Thus, we introduce WeaveBench, a long-horizon hybrid-interface benchmark with 114 tasks across 8 real-world work domains, grounded in real user requests and publicly verifiable artifacts. Each task requires agents to combine GUI observations/actions with CLI/code operations within a single trajectory. We evaluate these tasks on a real Ubuntu desktop inside deployed CLI-agent runtimes, augmented with a minimal desktop-control plugin. We also propose a companion trajectory-aware judge that inspects deliverables, files, screenshots, logs, and action traces, while detecting shortcut behaviors such as fabricated visual evidence or hard-coded metrics. Across frontier model-runtime pairings, the best PassRate reaches only 41.2%, showing the benchmark remains far from saturated. The trajectory-aware judge further reveals that outcome-only grading substantially overestimates agent performance. Overall, WeaveBench exposes a critical gap in CUA evaluation and provides an effective testbed to measure whether agents can orchestrate GUI, CLI, and code operations across long-horizon real-world tasks.

Synthetic aperture radar (SAR)-assisted optical cloud removal aims to recover surface information obscured by clouds in optical remote sensing images by exploiting complementary SAR observations. Existing multimodal fusion methods typically rely on direct spatial concatenation and pixel-wise supervision, which can propagate SAR speckle noise into optical reconstruction and lead to over-smoothed results. To address these limitations, we propose an Information Bottleneck-driven High-Fidelity Network (IB-HFN) for SAR-assisted optical cloud removal. IB-HFN employs a dual-stream backbone to preserve modality-specific representations before deep semantic fusion, thereby mitigating premature cross-modal contamination. At the fusion stage, we introduce a Spatial Information Bottleneck Fusion module that compresses SAR features through a channel-wise variational information bottleneck to suppress unstructured speckle noise. In parallel, a local-global gating mechanism predicts clear-sky regions and routes reliable optical details through a Dirac-initialized skip connection, decoupling noise suppression from texture preservation. We further develop a joint optimization strategy that integrates feature-level bottleneck regularization with image-level constraints on reconstruction accuracy, structural consistency, spectral fidelity, and contrastive sharpness. A dynamic weighting schedule balances these objectives to stabilize training and reduce hazy artifacts. Experiments on the SEN12MS-CR dataset under challenging spatio-temporal splits demonstrate that IB-HFN achieves superior structural preservation and spectral fidelity over existing methods.

Understanding tactical organisation of association football, hereafter referred to as football, requires identifying distinct match phases. Yet in-possession phases are rarely directly observable and are shaped by evolving tactical intentions, rather than spatial patterns alone. This study proposes a data-driven framework for identifying in-possession match phases from spatiotemporal tracking data. Seven German Bundesliga matches recorded at 25 Hz with TRACAB were analysed. A hierarchical phase model was defined with three tactical intentions (Invade Opponent Space, Keep Possession, Scoring) and six phases (Build Up, Progression, Counter Attack, Maintenance, Sustained Threat, Finishing). A Temporal Graph Attention Network (T-GAN) was developed to combine frame-level player-interaction graphs, contextual features, and Transformer-based temporal modelling. Performance was evaluated using frame-level F1 and a sequence-aware Intersection over Truth-Dominance (IoT-D) metric. T-GAN achieved macro-average frame-level F1 scores of 0.87 at the intention level, 0.76 for invasion-related phases, and 0.79 for scoring phases. At the sequence level, mean diagonal IoT-D F1 increased from 0.68 to 0.79 for intentions and from 0.61 to 0.71 for phases after post-processing, indicating improved temporal coherence. Model comparisons showed that sequence modelling was the main driver of segmentation quality, while graph-based relational modelling was particularly beneficial for Counter Attack recognition. Exploratory player attention analysis further suggested that wide and midfield positional groups contributed strongly to phase discrimination. Overall, the framework translates continuous tracking data into tactically interpretable in-possession phase representations, with potential applications in automated match annotation, tactical analysis, and playing-style profiling.

Understanding how transformer representations evolve across layers, not merely what they encode, remains an open problem in mechanistic interpretability. We recast the transformer forward pass as a discrete population trajectory through a high-dimensional representation manifold, drawing on geometric tools from computational neuroscience. Rather than probing for pre-specified features, we characterize trajectory geometry using five metrics computed directly in the ambient space: trajectory length, curvature, a semantic convergence index, layerwise cosine similarity, and representational stability. Across three model families (GPT-2, TinyLlama, Qwen2.5) and five controlled prompt families, we report four findings. First, semantically related prompts converge significantly in middle-to-late layers (peak CI 0.41--0.58, p<0.001, Mann-Whitney U), consistent with attractor-like dynamics. Second, reasoning tasks produce trajectories of greater curvature than lexical variations (0.71--0.83 rad vs. 0.27--0.31 rad), suggesting curvature encodes computational complexity. Third, ambiguous tokens exhibit trajectory bifurcation with up to 5.6x representational separation by the final layer, absent in unambiguous controls. Fourth, layerwise cosine similarity reveals a universal three-phase structure: encoding, elaboration, and output preparation, consistent across all three architectures. All four effects vanish under shuffled-layer and random-embedding controls. We release a fully open-source, model-agnostic pipeline and argue that trajectory geometry constitutes a principled, probe-free lens for mechanistic interpretability.

Generating novel, feasible, and high-quality research ideas is an important yet challenging task in scientific discovery. Recent Large Language Model (LLM)-based methods often ground idea generation with retrieved literature, but the retrieved evidence is usually provided as flat text, such as titles, abstracts, or summaries. Such flat contexts may contain redundant or weakly relevant information, while making cross-paper relations among problems, methods, mechanisms, and findings difficult to identify and trace. To address this challenge, we propose Graph2Idea, a knowledge graph-guided framework for retrieval-augmented scientific idea generation.Graph2Idea first retrieves papers according to the input topic, transforms them into structured knowledge triples, and dynamically constructs a target-centered knowledge graph to make literature relations explicit. It then extracts compact graph-derived contexts that retain target-relevant relational evidence while reducing noisy textual input. Based on these contexts, a two-stage generation process first identifies promising research directions and then guides the LLM to synthesize candidate ideas from graph-grounded evidence. Experiments on a scientific idea generation benchmark show that Graph2Idea outperforms representative baselines under the automatic evaluation protocol. Compared with the strongest baseline scores, it improves Novelty from 0.45 to 0.52, Quality from 0.24 to 0.29, and Feasibility from 0.22 to 0.28. These results suggest that graph-structured evidence helps LLMs generate research ideas through more explicit, compact, and traceable recombination of prior scientific knowledge.

Scientists have historically relied on mathematical models based on differential equations to relate system inputs -- forces, fluxes, or heat sources -- to outputs, such as displacement, velocity, concentration, and temperature. These models rely on deep domain knowledge to determine the form of the governing differential equation, which is then calibrated with data by solving an inverse problem. In recent years, the field of Scientific Machine Learning has introduced a variety of alternative modeling strategies for physical systems. A method called Sparse Identification of Nonlinear Dynamics learns the governing equation as a sparse linear combination of terms in a user-defined library. Neural Ordinary Differential Equations construct the governing equation by taking in the state and its derivatives at the input layer of a neural network. Entirely foregoing the modeling framework of differential equations, neural operators directly learn a non-linear mapping between the system inputs and outputs. From inverse problems to neural operators, all of these modeling strategies can be conceptualized as data-driven machinery to predict a system's response over a range of inputs. It is then natural to wonder how exactly these various strategies relate to each other, and whether they can be neatly taxonomized. Drawing from the philosophical literature on scientific models, we argue that many model types have a common structure, differing only in the assumed model class of the input-output relation they define. Connecting to philosophical ideas on mechanism, and arguing that data from physical systems arises from solutions to parsimonious differential equations, we propose that only certain models are capable of mechanism discovery, and thus generalization. Our analysis is intended to unite apparently disparate modeling strategies and provide insight into their appropriate use cases.

Global LiDAR localization is a fundamental task for autonomous navigation systems. Recent methods perform Scene Coordinate Regression (SCR) and achieve superior accuracy over Absolute Pose Regression (APR) solutions by predicting dense 3D world coordinates. However, SCR approaches introduce two major bottlenecks: severe computational inefficiency from processing raw 3D geometries and significant performance degradation under varying sensor viewpoints. To address these limitations, we present MB-Loc, a lightweight and viewpoint-robust SCR framework. Instead of relying on heavy 3D convolutions, we project the input LiDAR scan into a 2.5D Multi-planar Bird's-Eye View (BEV) representation. By slicing the point-cloud along the Z-axis and mapping signed depths into discrete 2D planes, MB-Loc retains essential 3D geometric structures while exploiting the computational tractability of standard 2D CNNs. To handle the inherent sparsity of outdoor LiDAR, we introduce a KL-regularized latent bottleneck that explicitly models spatial uncertainty without injecting stochastic noise. Finally, to ensure rotation robustness, we apply 3D spatial augmentations prior to planar projection, forcing the network to implicitly learn viewpoint-invariant features. We perform extensive experiments on the publicly available NCLT dataset and demonstrate that our proposed method outperforms the current state-of-the-art. Operating at real-time inference speeds, MB-Loc significantly outperforms traditional 3D-SCR architectures in computational efficiency.

Vision-Language-Action (VLA) models achieve strong benchmark performance but still struggle in real-world deployment with unseen objects, background shifts, and different robot embodiments. We argue that this stems from the lack of a unified geometry-aware manipulation representation, leaving existing VLAs vulnerable to low-level trajectory supervision, misaligned 3D features, and embodiment differences. To address this, we propose GEAR-VLA, a VLA framework for learning unified geometry-aware action representations for generalizable robotic manipulation. GEAR-VLA adopts coarse-to-fine action learning, where multi-source embodied pretraining equips the VLM with embodied reasoning and discrete action understanding before latent action tokens connect action semantics to a gradient-decoupled DiT continuous action expert. It further performs semantic-aligned 3D integration by aligning a trainable 3D spatial backbone with the VLA representation while freezing the original VLM-aligned visual pathway. To share this representation across robots, GEAR-VLA uses embodiment canonicalization, where embodiment-aware states and embodiment-invariant actions confine robot differences to the low-level interface. Extensive simulation and real-world experiments demonstrate strong generalization: GEAR-VLA achieves state-of-the-art performance on LIBERO, zero-shot LIBERO-Plus, and RoboTwin 2.0, reaches 85.9% success on AgileX and 81.0% on the pretraining-unseen LDT-01 embodiment, and obtains 90.1% success on a 6,360-trial universal grasping benchmark with 212 unseen objects. Code and models will be released at https://github.com/babynabeauty/GEAR-VLA.