Passive acoustic monitoring (PAM) enables large-scale biodiversity assessment, but continuous recording generates large amounts of non-informative audio, creating challenges for storage, power consumption, and long-term edge deployment. Bird audio detection (BAD), which identifies bird vocalizations, can reduce this burden by filtering irrelevant recordings before downstream analysis. However, most BAD systems are trained on temperate datasets despite tropical soundscapes being denser, more species-rich, and acoustically unpredictable. To address this gap, we introduce SEABAD (Southeast Asian Bird Activity Detection), a dataset of 50,000 curated three-second clips from Southeast Asian soundscapes, evenly balanced between bird-present and bird-absent samples. The dataset spans 1,677 bird species and is standardized to 16 kHz mono audio for embedded and low-power inference. We developed a dual-branch curation pipeline: a six-stage positive-label workflow applied to Xeno-Canto recordings, alongside six source-specific negative-label extractions from environmental datasets. These procedures reduced class imbalance by 13.7% (Gini coefficient: 0.601 to 0.519). A manual audit of 1,000 positive clips confirmed 97.8% +/- 0.9% labeling accuracy. Baseline experiments using MobileNetV3-Small achieved 99.57% +/- 0.25% accuracy and 0.9985 +/- 0.0002 AUC across three random seeds. SEABAD and the full curation pipeline are publicly released to support tropical BAD research and energy-efficient acoustic monitoring.

Objective: Stage-wise workflows that separate model scaling and inverse kinematics can induce morphology-posture compensation, resulting in anatomically inconsistent yet numerically acceptable solutions, especially in weakly observed directions. We present SmoCap, a leakage-resistant canonicalization framework that estimates morphology and posture jointly in each local trust-region quadratic program (QP) within a sparse control subspace. Methods: SmoCap solves a constrained trust-region QP with analytical proxy-mapped pose and scale Jacobians. The low dimensional proxy map stabilizes weakly observed directions and drives coordinated structures. An optional pre-solve provides warm starts in difficult configurations. The framework is evaluated using cohort fluoroscopy knee motion, anthropometric ground truth, and extreme yoga sequences. Results: SmoCap achieved 2.9 degree knee flexion RMSE against fluoroscopy, and a pooled anthropometric endpoint error around 3%. In the leakage audit against segment wise scaling, SmoCap also reduced marker RMSE, FE error, and anthropometric endpoint error. Proxy coupling preserved expressive and coordinated spine motion with marginal fitting error increase (+0.14 mm, +0.6%) against baseline models in yoga ablation. Median marker RMSE was around 20 mm, and median runtime was 0.204-0.332 ms/frame, achieved with consistently 2-3 iterations. Conclusion: SmoCap provides an externally validated unified coupling-aware scale-pose framework, making externally consistent motion canonicalization practical at dataset scale.

Modern vision backbones treat pointwise activations (e.g., ReLU, GELU) and exponential softmax as essential sources of nonlinearity, but we demonstrate they are not required within MetaFormer-style vision backbones. We design activation-free polynomial alternatives for three core primitives (MLPs, convolutions, and attention), where Hadamard products replace standard nonlinearities to yield polynomial functions of the input. These modules integrate seamlessly into existing architectures: instantiated within MetaFormer, a modular framework for vision backbones, our PolyNeXt models match or exceed activation-based counterparts across model scales on ImageNet classification, ADE20K semantic segmentation, and out-of-distribution robustness. We also substantially outperform prior polynomial networks at reduced computational cost, showing that polynomial variants of standard modules beat complex custom architectures.

Several large-scale video datasets have been published these years and have advanced the area of video understanding. However, the newly emerged user-generated short-form videos have rarely been studied. This paper presents USV, the User-generated Short-form Video dataset for high-level semantic video understanding. The dataset contains around 224K videos collected from UGC platforms by label queries without extra manual verification and trimming. Although video understanding has achieved plausible improvement these years, most works focus on instance-level recognition, which is not sufficient for learning the representation of the high-level semantic information of videos. Therefore, we further establish two tasks: topic recognition and video-text retrieval on USV. We propose two unified and effective baseline methods Multi-Modality Fusion Network (MMF-Net) and Video-Text Contrastive Learning (VTCL), to tackle the topic recognition task and video-text retrieval respectively, and carry out comprehensive benchmarks to facilitate future research. Our project page is https://usvdataset.github.io.

Architectural spatial intelligence, the ability to recognize and infer architectural space, is fundamental to tasks such as robot navigation, embodied interaction, and 3D scene understanding and generation. Although extensive research has evaluated the basic spatial skills of Vision-Language Models (VLMs) such as relative orientation, distance comparison, and object counting, these tasks cover only the most elementary levels of spatial cognition and largely overlook higher-level cognition of architectural space, including layout understanding, circulation patterns, and functional zoning. In this work, we present ArchSIBench, a Benchmark for Architectural Spatial Intelligence based on the perspectives from architecture, cognitive science, and psychology. ArchSIBench covers five core dimensions: perception, reasoning, navigation, transformation, and configuration, comprising 17 fine-grained subtasks. Through careful manual annotation by experts with architectural backgrounds, we construct 3,000 question-answer pairs to enable comprehensive evaluation of architectural spatial intelligence. Based on ArchSIBench, we evaluate various VLMs and find that the architectural spatial intelligence of most models shows significant differences from human baselines; additionally, models exhibit substantial variability across capability dimensions. Some state-of-the-art models can approach the level of human evaluators without architectural training. However, a clear gap remains compared to human evaluators with architectural training, particularly in spatial transformation and configuration reasoning. We believe that ArchSIBench will provide important insights and systematic resources for measuring and advancing the architectural spatial intelligence of VLMs. The dataset and code are available at https://huggingface.co/datasets/ArchSIBench/ArchSIBench.

Direct Preference Optimization (DPO) has emerged as a popular alternative to Reinforcement Learning from Human Feedback (RLHF), offering theoretical equivalence with simpler implementation. We prove this equivalence is conditional rather than universal, depending on an implicit assumption frequently violated in practice: the RLHF-optimal policy must prefer human-preferred responses. When this assumption fails, DPO optimizes relative advantage over the reference policy rather than absolute alignment with human preferences, leading to pathological convergence where policies decrease DPO loss while preferring dispreferred responses. We characterize when this assumption is violated, show the existence of an undesirable solution space, and prove that DPO and RLHF optimize fundamentally different objectives in such cases. To address this, we introduce Constrained Preference Optimization (CPO), augmenting RLHF with constraints for provable alignment. We further provide a geometric interpretation through soft margin ranking, revealing that DPO implements margin ranking with potentially negative targets. Our theoretical analysis establishes when DPOs' guarantees hold and provides solutions preserving simplicity with provable alignment. Comprehensive experiments on standard benchmarks demonstrate that CPO achieves state-of-the-art performance. Code is available at: https://github.com/visitworld123/CPO.

Memory is a central capability for LLM agents operating across long-horizon tasks. Existing memory benchmarks predominantly evaluate retention of personalized information in multi-turn chat scenarios, overlooking the dynamic memory formation that occurs during extended agent execution. Consequently, the memory systems they produce transfer poorly to realistic agentic environments, such as coding and web navigation. We present MemGym, a benchmark for agentic memory that unifies existing agent gyms and in-house memory-grounded pipelines behind one memory-reasoning interface. MemGym spans five evaluation tracks grouped into four agentic regimes: tool-use dialogue (tau2-bench), multi-turn deep-research search (MEMGYM-DR), coding (SWE-Gym and MEMGYM-CODEQA), and computer use (WebArena-Infinity). MemGym reports memory-isolated scores that decouple memory performance from reasoning, retrieval, and tool-use ability, so memory strategies can be ranked without those confounders. Our synthetic pipelines for MEMGYM-CODEQA and MEMGYM-DR are length-controllable, ablation-verified at every stage, and tightly aligned with downstream scenarios. To make evaluation on coding environments academically tractable, we train MemRM, a lightweight reward model (Qwen3-1.7B fine-tuned with QLoRA) that scores compression quality as a fast scalar read in place of full Docker rollouts.

Panoramic radiograph (PR) is fundamentally used in routine dental care, but it inherently provides only a two-dimensional (2D) projection of complex three-dimensional (3D) craniofacial anatomy. Most existing learning-based methods attempt to computationally recover this 3D information by directly regressing native cone-beam computed tomography (CBCT) volumes from PR. However, this direct mapping requires the model to simultaneously learn common anatomical structures and patient-specific morphological variations. This entangled formulation makes the ill-posed 2D-to-3D inverse problem highly ambiguous, often producing over-smoothed reconstructions with blurred anatomical boundaries. To address this, we propose HyDAR-Pano3D, a two-stage framework that reformulates PR-to-CBCT reconstruction as a disentangled anatomical recovery problem. In Stage 1, a dual-encoder network integrates radiographic features with SAM-derived semantic priors to reconstruct an arch-normalized canonical volume. In Stage 2, an Anatomical Restoration Network predicts a prior-constrained structured deformation field to map this canonical volume back to the native space, restoring individual morphological variations. Experiments on three large-scale datasets show that HyDAR-Pano3D significantly outperforms baseline methods ($p < 0.05$), achieving a 25.76 dB PSNR, 85.70\% SSIM, and an 83.83\% overall anatomical Dice score. The synthesized volumes successfully support downstream segmentation of whole teeth (82.4\% Dice) and the inferior alveolar canal (72.2\% Dice), demonstrating that our disentangled approach preserves clinically relevant structures to enable robust anatomy-aware assessment when CBCT data is unavailable.

Many sequence computations are easier to study as movement through internal states than as isolated local circuits. We introduce Markovian Circuit Tracing (MCT), a diagnostic pipeline for testing whether transformer activations contain coarse state-transition structure. The benchmark uses synthetic Hidden Markov Model (HMM) tasks where latent states, transition matrices, Bayesian belief vectors, Bayes-optimal predictions, and forced-state counterfactual targets are known exactly. Across six HMM families and three seeds per family, tiny causal transformers learn near-Bayes next-token predictors, with mean excess loss over Bayes of 0.0138. Residual activations contain partial Bayesian belief information in this controlled synthetic benchmark. State abstractions extracted from these activations recover coarse transition signal, strongest in persistent and lower-state regimes, and weaker in ambiguous-emission and six-state regimes. The clearest result comes from state forcing. Patching a recovered-state centroid reduces KL to the exact HMM counterfactual target from 0.1957 in the unpatched model to 0.0532 on average, beating wrong-state, mean-activation, random-activation, and shuffled-label controls. The contribution is a controlled benchmark and evaluation framework for transformer state-dynamics interpretability, with MCT as a simple reference pipeline

In this work, we address the challenge of Scene Change Detection (SCD), where the goal is to identify variations between two images of the same location captured at different times. Existing SCD models often overlook the varying importance of features across layers, employ single-step decoders that confine refinement, and provide limited insight into encoder pretraining strategies. We propose TERDNet, a Transformer Encoder-Recurrent Decoder Network designed to overcome these limitations. TERDNet consists of a transformer-based encoder that extracts multi-level representations, a feature fusion module that integrates correlation volumes with these features, a recurrent 3-gate-GRU decoder that performs iterative refinement, and a combined convolution-interpolation upsampler that restores fine-grained resolution. Extensive experiments on four public benchmarks show that TERDNet consistently outperforms prior approaches and produces more accurate and detailed change masks. Ablation studies confirm the benefit of segmentation-based pretraining and the effectiveness of our fusion design. In addition, robustness tests under viewpoint misalignment confirm TERDNet's potential for deployment in real-world robotic systems, where reliable perception is critical. Our code is available at https://github.com/AutoCompSysLab/TERDNet.

Detecting what has changed in an environment is essential for long-term autonomy, yet most change detection settings assume fixed viewpoints, mild misalignment, or only a few changed objects. We introduce Video-based Scene Change Detection (VSCD), which predicts a pixel-wise change mask for each query frame, given a reference and a query RGB video of the same indoor space recorded at different times under unconstrained camera motion. The two videos are not temporally synchronized, and many object instances may appear or disappear. To study this setting, we build a large-scale benchmark with over 1.1 million frames annotated with pixel-accurate change masks, together with a real-world test set for evaluating transfer beyond simulation. We propose a query-centric multi-reference model that learns temporal matching implicitly from change-mask supervision, aligns candidate reference features to the query via local patch correspondence, and fuses per-candidate change features using frame-level and patch-level confidence before decoding a high-resolution mask once per frame. Our approach achieves state-of-the-art performance against strong image- and video-based baselines, and we validate its real-world impact by deploying it on a mobile robot for two downstream applications -- visual surveillance and object incremental learning.

2D Gaussian splatting provides an efficient explicit representation for image reconstruction, but existing methods still require costly per-image iterative optimization or rely on handcrafted priors for primitive allocation. We present AIR, a self-supervised feed-forward framework that amortizes iterative Gaussian fitting into a single network pass, eliminating per-image test-time optimization. AIR adopts a stage-wise residual architecture that progressively predicts additional Gaussian primitives from reconstruction residuals, together with an explicit Stage Control mechanism that activates new primitives only in under-reconstructed regions. A Predict--Optimize--Distill training strategy stabilizes multi-stage prediction by distilling short-horizon optimized Gaussian increments back into the predictor. The stabilized predictor is then jointly finetuned across stages and equipped with an image-adaptive quantizer for compact Gaussian storage. Experiments on Kodak and DIV2K show that AIR achieves better reconstruction quality than representative Gaussian-based baselines while reducing encoding time to 160--300\,ms. Code: https://github.com/whoiszzj/AIR.git

In this report, we present our champion solutions for the Natural Language Queries and GoalStep tracks of the Ego4D Episodic Memory Challenge at CVPR 2026. Both tracks require accurately localizing temporal segments from long untrimmed egocentric videos. To address these tasks, we propose a reranking-based framework that effectively leverages the strong video-language reasoning capability of multimodal large language model (MLLM) while preserving the efficiency and candidate recall of conventional localization pipelines. Specifically, we first obtain a set of candidate segments from existing localization model OSGNet, and then employ MLLM to select the segment that best matches the given query, thereby refining the final prediction. Ultimately, our method achieved first place in both the Natural Language Queries and GoalStep tracks. Our code can be found at https://github.com/iLearn-Lab/CVPR25-OSGNet.

Graph-based Retrieval Augmented Generation (GraphRAG) extends retrieval-augmented generation to support structured reasoning over complex corpora, but its reliability under resource-constrained, privacy-sensitive deployments remains unclear. In healthcare, where Electronic Health Record (EHR) data is complex and strictly regulated, reliance on cloud-based large language models (LLMs) introduces challenges in cost, latency, and compliance. In this work, we present a systematic evaluation of GraphRAG for EHR schema retrieval using locally deployed open-source LLMs. We implement the Microsoft GraphRAG pipeline on real-world EHR schema documentation and benchmark four models, including Llama 3.1 (8B), Mistral (7B), Qwen 2.5 (7B), and Phi-4-mini (3.8B), each deployed via Ollama on a single consumer GPU (8 GB VRAM). We evaluate indexing efficiency, knowledge graph construction, query latency, answer quality, and hallucination under both global and local retrieval modes. Our results reveal substantial differences: Llama 3.1 produces the richest knowledge graph (1,172 entities), Qwen 2.5 achieves the best answer quality (3.3/5), Phi-4-mini fails to complete the pipeline due to structured-output errors, and Mistral exhibits degenerate repetition behavior. We further show that GraphRAG exhibits a practical capacity threshold, where models below approximately 7B parameters fail to reliably produce valid structured outputs and cannot complete the pipeline. In addition, indexing and answer quality are decoupled across models, and local retrieval consistently outperforms global summarization in both latency and factual grounding, with reduced hallucination. These findings demonstrate that GraphRAG is feasible on consumer hardware while highlighting the importance of model selection and retrieval design for robust deployment in regulated settings.

Inference in diffusion large language models (dLLMs) is computationally expensive, as full self-attention must be repeatedly executed at each step of the denoising process without KV cache. Recent sparse attention methods for dLLMs mitigate this cost via block-sparse computation, which is applied only in later iterations when model performance is less sensitive to coarse-grained sparse approximation, but yields limited improvements in computational efficiency and acceleration. This motivates a finer-grained sparsification strategy that can be applied from earlier iterations and leverages reusable sparsity patterns, enabling further efficiency gains. In this work, we introduce PulseCol, a periodically refreshed column-sparse attention method for accelerating diffusion language models. PulseCol replaces coarse block-level sparsity with a finer-grained column-sparse structure, allowing important attention interactions to be retained more precisely while exposing greater sparsity. Built on this column-level formulation, PulseCol further identifies sparse patterns at the early denoising step and reuses them across subsequent iterations, refreshing them only at a small number of intermediate steps to track the evolution of sparse attention patterns during denoising. Experiments show that PulseCol achieves higher sparsity and greater practical speedup than prior sparse attention methods for dLLMs, while maintaining model quality. Enabled by optimized GPU kernels for column-sparse attention, PulseCol delivers up to 1.95$\times$ end-to-end speedup over FlashAttention across several context lengths.

Robotic imitation learning is often treated as reproducing demonstrated actions, but actions are inherently embodiment-specific. When demonstrations come from humans or robots with different morphology, kinematics, or action spaces, this action-centric view requires shared action spaces, heuristic retargeting, or large-scale multi-embodiment co-training. We instead view demonstrations as implicit specifications of future goals: the target agent should infer what state the demonstrator is trying to realize, rather than how the demonstrator executes it. We propose Demo-JEPA, a cross-embodiment imitation framework that decouples demonstration intent from embodiment-specific execution. Built on a JEPA-based world model, Demo-JEPA translates source visual demonstrations into target-compatible future latent trajectories in a shared predictive representation space. The target agent then uses these latent trajectories as subgoals and realizes them through planning under its own learned forward dynamics. Because Demo-JEPA avoids action-level correspondence and requires only visual demonstrations plus the target agent's own interaction experience, it supports flexible imitation across heterogeneous embodiments. Experiments on RLBench and real-world manipulation tasks show that Demo-JEPA matches specialized in-domain planners and generalizes to unseen tasks and embodiment configurations where prior methods fail.

While Large Language Models (LLMs) demonstrate remarkable performance on zero-shot annotation tasks, they often struggle with the specialized conventions of gold-standard benchmarks. We propose the systematic reuse and refinement of annotation guidelines as an alignment mechanism, introducing an iterative moderation framework that simulates the early phases of annotation projects. We evaluate three hypotheses: (1) the efficacy of guideline integration, (2) the advantage of reasoning optimized models, and (3) the viability of moderation under minimal supervision. Testing across biomedical NER tasks (NCBI Disease, BC5CDR, BioRED) with three LLM families (GPT, Gemini, DeepSeek), our results empirically confirm all three hypotheses. While the iterative moderation framework shows good potential in effectively refining guidelines, our analysis also reveals substantial room for improvement.

Modern ultra-high-resolution image synthesis relies heavily on the robust generative capacity of large-scale pre-trained Latent Diffusion Models (LDMs). While recent representation alignment methods have proven effective by distilling visual priors from foundation models (e.g., SAM or DINO) into generative latent features, scaling these approaches to pre-trained LDMs at extreme resolutions exposes a critical learnability-fidelity conflict. Specifically, forcing direct patch-wise feature distillation inherently perturbs the pre-trained latent manifold, ultimately leading to generation degradation. To address this bottleneck, we propose Spatial Gram Alignment (SGA), a novel framework that explicitly leverages the representation priors of vision foundation models while preserving the native generative capacity of LDMs. Moving beyond restrictive direct alignment, SGA imposes a non-invasive spatial constraint by aligning the internal self-similarities of the generative features with those of the foundation priors. This spatial constraint effectively establishes macroscopic structural coherence, while the native generative objectives retain the microscopic pixel-level fidelity inherent to the original LDMs. Notably, this versatile strategy integrates seamlessly across both intermediate diffusion features and VAE latents within pre-trained LDMs. Extensive experiments demonstrate that SGA achieves state-of-the-art performance for ultra-high-resolution text-to-image synthesis, yielding an effective reconciliation between global structural integrity and fine-grained visual details. Code is available at https://github.com/zhang0jhon/SGA.

Subject-driven text-to-image generation still struggles to preserve high-frequency identity details such as logos, patterns, and text. Existing methods typically operate directly in RGB space, which often leads to detail degradation under substantial edits. We propose a two-stage framework that decouples structure from appearance by first predicting a Canny map and then rendering the final image conditioned on both the source appearance and the predicted structure. To improve text handling, we further introduce a fully automatic pipeline that constructs a 100k-pair text-aware dataset with cross-view textual consistency. Experiments, including GPT-4.1-based evaluation and a knowledge distillation study, show clear gains over selected baselines and suggest that intermediate structural prediction is an effective route for high-fidelity subject-driven generation. Our dataset and code will be made publicly available.

We present a set of improvements to the OlmoEarth family. These improvements allow us to cut compute costs during training ($1.7 \times$ reduction in GPU hours required to train our Base models) and inference ($2.9\times$ reductions in MACs on Sentinel-2 tasks), while maintaining the models' overall performance. All training code is available at github.com/allenai/olmoearth_pretrain.

Continual learning (CL) aims to train models sequentially on multiple tasks while mitigating catastrophic forgetting of previously learned knowledge. Recent advances in large pre-trained models (LPMs) and model merging techniques, such as MAGMAX, have demonstrated effective CL performance by combining task-specific parameters. However, existing methods primarily focus on average performance across all tasks and do not adequately address how to construct models accommodating different deployment environments or varying user preferences. This paper proposes a model merging framework, termed Tunable MAGMAX, which enables preference-aware control of task-specific performance in CL. Our method introduces a preference vector that controls the number of elements selected from each task vector during model merging, allowing us to adjust the merged model performance according to their deployment needs. We further propose a method for automatically constructing appropriate preference vectors by leveraging small amounts of target environment data and datasets from model training tasks, thereby eliminating the need for manual specification. The experimental result on CL benchmark tasks demonstrates that Tunable MAGMAX effectively controls task-wise performance and successfully adapts merged models to various target environments. The proposed Tunable MAGMAX achieves superior or comparable performance to baseline methods, making it a practical solution for deploying CL models to various environments where the preferences of each task performance differ.

Adaptive robot navigation in dynamic environments requires policies that can reach the target reliably while producing efficient and stable trajectories. This paper presents Q-SpiRL, a quantum spiking reinforcement learning framework for obstacle-aware robot navigation. The framework develops and evaluates five agent families: tabular Q-learning, classical MLP, classical SNN, quantum-enhanced MLP (QMLP), and quantum-enhanced spiking neural network (QSNN). While all models are implemented under a unified training and evaluation pipeline, the QSNN is the central architecture of interest, as it combines spike-based temporal processing with variational quantum feature transformation. Experiments are conducted across three grid-world environments of increasing size, namely 20x20, 30x30, and 40x40, with both static and dynamic obstacles. Performance is assessed using success rate, success-weighted path length, path length, and turn rate under deterministic inference. Results show that QSNN achieves the strongest overall trade-off between task completion, trajectory efficiency, and motion smoothness, reaching up to 99% success rate while maintaining high path efficiency in the most challenging setting. Execution on IBM quantum hardware further demonstrates the feasibility of deploying the proposed hybrid policy under real-device conditions.

Narang et al. (2021) evaluated 40+ Transformer modifications at T5-base scale and concluded that most did not transfer. Five years later, the typical working regime has moved to 1-3B parameters, downstream evaluation has replaced pretraining perplexity, and a substantially different catalogue of modifications has emerged. We revisit their question by testing 20 post-2021 Transformer modifications at 1.2B and 3B under strict iso-data, iso-compute, iso-recipe control, with a multi-seed baseline noise floor and CLIMB-12 downstream evaluation as the primary metric. The central finding reproduces theirs at this curated set: most modifications do not transfer. Of the 20 modifications, only two clear Bonferroni correction at 1.2B; one of those two further fails to train stably at 3B under the shared recipe. We also find that the loss-downstream gap reported by Tay et al. (2023) enlarges several-fold for attention-output modifications: two significant failures converge to within 2-3% of baseline validation loss yet drop 6-16 CLIMB-points. We conclude that noise-floor reporting, downstream evaluation, and cross-scale stability testing are now prerequisites for architecture comparisons at 1-3B.

The present paper introduces a new representation-driven approach to per-instance algorithm selection, applied to black-box optimization, for automatically choosing the most promising solver from a fixed portfolio. Prior work in continuous optimization largely relies on numerical descriptors, including Exploratory Landscape Analysis features and learned embeddings such as Deep-ELA. This work studies a complementary representation: contour-map visualizations of probed landscapes. A CNN regressor takes multiple instance-specific contour views (stacked or encoded per view and aggregated) and predicts per-solver performance, enabling selection by the predicted best value. On the standard BBOB 2009 single-objective protocol, the resulting selectors significantly outperform the single best solver (SBS) and are competitive with feature-based baselines. A subsequent bi-objective evaluation under the DeepELA setting further indicates that the same image-based principle can be competitive when using windowed contour views. Overall, the results suggest that simple vision models can exploit spatial structure in probed landscapes for algorithm selection without handcrafted ELA features.

We introduce a manifold-based framework for addressing optimization problems with equality and inequality constraints found in robotics. Our approach transforms the original problem into an unconstrained optimization problem directly on the constrained state space. To achieve this, we introduce ``constraint manifolds with corners" to represent the state space satisfying mixed nonlinear equality and inequality constraints. We further extend manifold optimization algorithms to operate on this new topological structure. We demonstrate the power and robustness of our framework in the context of a large-scale kinodynamic planning problem, successfully generating dynamically feasible trajectories where standard methods fail.

Recent advances in natural language processing (NLP) and large language models (LLMs) have enabled the systematic use of large-scale textual data from news, social media, and reports to create datasets with socio-economic impacts of climate hazards such as floods, droughts, storms, and multi-hazard events. As the field of text-as-data for impact assessment expands, so does its methodological complexity. Yet research remains fragmented, with no clear guidelines for defining what constitutes an impact, handling temporal and spatial biases, and selecting appropriate modeling and post-processing strategies. This lack of coherence limits transparency and comparability across studies. Here, we address this gap by synthesising common practices, describing key challenges specific to the use of text-as-data methods for analyzing socio-economic impact data, and proposing recommendations to address them. By providing guidance on best practices, we aim to support the construction of robust text-derived socio-economic impact datasets that can more accurately inform disaster risk management and attribution studies.

This paper reflects on twenty years of building NLP resources and research infrastructure for Arabic, a language spoken by hundreds of millions yet historically underserved relative to languages such as English or Chinese. The first decade focused on foundational linguistic infrastructure; the second shifted toward computational social science, social media analysis, and socially oriented applications. Rather than cataloguing outputs, the paper examines what the experience of building them revealed. Three counterintuitive lessons emerge: building datasets is as much a social process as a technical one; communities formed around shared tasks often matter more than the tasks themselves; and moving from language resources to computational social science exposes challenges that traditional NLP training does not address. We discuss three failures: a depression detection corpus that never reached clinical practice, a period of spreading across too many shared tasks without sufficient depth, and a long-standing assumption that Modern Standard Arabic infrastructure would transfer cleanly to dialectal tasks. These experiences suggest that the hardest problems in developing NLP for underserved communities are not linguistic but social, institutional, and epistemic, and require competencies the field rarely teaches.

Spatial reasoning requires both location-bound computation and location-invariant structure: agents must make local moves while preserving route, object, or constraint-level plans. We propose interaction locality, a task-geometry-aware framework for measuring whether information flow stays within nearby cells or semantic segments, or crosses them. We instantiate the framework with sparse-autoencoder feature ablations and finite-noise activation patching, with structural Jacobian and attention checks reported in the appendix, and apply it to HRM and TRM, two compact hierarchical and recursive reasoning models, on Maze-Hard, Sudoku Extreme, and ARC-AGI. Across these models, activation patching gives the clearest architectural fingerprint: high-level recurrent states tend to write information within nearby cells or same-segment units, while repeated recursive updates accumulate these local writes into broader solution structure. This pattern holds across maze paths, Sudoku constraints, and ARC-AGI object neighborhoods, with the strongest concentration in TRM. To test whether interaction locality extends beyond toy-yet-challenging grid benchmarks, we also apply it to MTU3D, a large-scale embodied 3D scene-grounding model. In this MTU3D setting, causal spatial locality appears primarily at the transition where visual scene features are handed to the downstream grounding module, rather than uniformly throughout the visual encoder. This contrast suggests that the local-to-global handoff observed in HRM and TRM is tied to explicit recursive reasoning dynamics, while embodied 3D models may concentrate causal spatial structure at module boundaries. Interaction locality turns the intuitive local-execution/global-planning story into a reproducible measurement framework for recursive and embodied spatial reasoning.

Objective: The growing availability of large-scale observational clinical datasets and challenges in conducting randomized controlled trials have spurred enthusiasm in using causal machine learning (ML) for causal inference in observational data. We present a roadmap for applying causal ML to observational data. Materials and methods: We outline the importance of assessing validity assumptions within available data and applying causal ML responsibly for clinical experts using causal ML and ML practitioners with limited clinical expertise. Observations: Despite advances in causal ML, its limitations remain largely under-appreciated across disciplines. This gap in shared knowledge may impact the validity of findings. Discussion: Causal assumptions must be satisfied and modeling choices justified. Otherwise, these approaches risk producing biased or misleading results, with consequences for clinical research and patient care. Conclusion: Causal ML can be a powerful tool for generating causal hypotheses. We provide a template to strengthen the rigor and interpretability of causal analyses.

Physics-informed diffusion models typically enforce PDE constraints only on final outputs, leaving intermediate representations unconstrained and prone to shortcut learning under shifted boundary conditions. We introduce **REPA-P**, a teacher-free, architecture-agnostic framework that aligns intermediate features with physical states using first-principles residuals. REPA-P attaches lightweight $1{\times}1$ projection heads to selected layers, decodes hidden activations into physical quantities, and applies PDE residual losses during training. These heads are discarded at inference, introducing **zero overhead**. Across four PDE tasks, including Darcy flow, topology optimization, electrostatic potential, and turbulent channel flow, REPA-P accelerates convergence by up to $2{\times}$, reduces physics residuals by up to $66.4\%$, and improves out-of-distribution robustness by up to $49.3\%$, with consistent gains on both U-Net and Diffusion Transformer backbones. Ablations show that supervising a small set of intermediate layers captures most benefits and complements output-level physics losses. Code is available at [https://github.com/Hxxxz0/REPA-P](https://github.com/Hxxxz0/REPA-P).